Tamiya is pleased to announce this exclusive PRO version for the 4WD rally chassis with shaft drive. based on the 58707 XV-02 PRO Chassis Kit – in the XV chassis series; this time the kit is mainly on-road oriented, and features upgrades such as dedicated 3.5mm thick carbon fibre shock absorber sheaths, aluminium cylinder oil dampers using shaft length suitable for on-road performance, and a carbon fibre reinforced rigid lower deck.

Model information:
– 1/10 scale R/C chassis assembly kit.
– Features oil shocks with aluminium cylinders employing shaft length suitable for road performance and dedicated 3.5mm thick carbon fibre shock mounts and carbon fibre reinforced rigid lower deck.
– The 18-spoke wheels are matched with semi-slick racing tyres.
– Front mid-mounted engine plus long front and rear drive shafts of identical length.
– Comes with two 39T differential gears and one 40T differential gear for front and rear drive adjustment.
– Use 39-tooth gears (with 15-tooth gears) at the front and rear for standard transmission balancing, 39-tooth gears (with 15-tooth gears) at the front and 40T gear (with 15T gear) at the rear for forward transmission balancing, and vice versa for rearward transmission tilt balancing. *Use the latter two with slipper clutch and centre differential.
– The longitudinal battery pack is positioned to the centre left for optimal balance.
– The flat bottom of the chassis and the slip angle on the front bumper further contribute to limiting surface contact.
– The caster blocks feature a six-degree angle.
– Includes universal drive shafts front and rear and an aluminium servo mount.
– Please note that a polycarbonate chassis cover is not included in this version.
RC system sold separately.

Tamiya is pleased to announce this exclusive PRO version for the 4WD rally chassis with shaft drive. based on article 58707 XV-02 PRO Chassis kit – in the XV chassis series; this time the kit is mostly on-road oriented, and features upgrades like this such as dedicated 3.5mm thick carbon fiber shock absorber tubes, aluminum cylinder oil shock absorbers employing the appropriate shaft length for road performance and carbon fiber reinforced rigid lower deck.

Model information:
• 1/10 scale R/C chassis assembly kit.
• Features oil filled shock absorbers with aluminum cylinders employing a shaft length suited to road performance and dedicated 3.5mm thick carbon fiber shock mounts and carbon fiber reinforced rigid lower deck.
• 18-spoke wheels are paired with semi-slick racing tyres.
• Mid-front positioned engine plus long front and rear drive shafts of equal length.
• Comes with two 39T differential gears and one 40T differential gear for front and rear wheel drive adjustment.
• Use 39-tooth gears (with 15-tooth gears) on the front and rear for standard drivetrain balance, 39-tooth gears (with 15-tooth gears) on the front, and 40T gear (with 15T gears) on the rear for the balance of the forward drivetrain and vice versa for the balance of the rearward lean drivetrain. *Use the latter two with slipper clutch and center differential.
• Longitudinal battery pack is positioned center left for optimum balance.
• The flat underbody of the chassis and the angle of slip on the front bumper further contribute to limiting surface contact.
• Caster blocks have a six degree angle.
• Includes front and rear universal drive shafts and an aluminum servo mount.
• Please note that a polycarbonate frame cover is not included in this version.

Image of the corresponding Tamiya 1/20 scale static kit

Splendid 1:10 scale radio-controlled model reproducing the Fiat 131 Abarth in Olio Fiat livery. The model uses the tried and tested MF-01X 4WD chassis.
Fiat 131 Abarth Rally, derived from the Fiat 131 Mirafiori, debuted in 1976 and became champion in world rally races in 1977 and 1978.
The kit reproduces the livery of the Fiat Olio.

Model features:
– R/C model assembly kit in 1/10 scale. Length: 400mm, width: 180mm, height: 132mm. Wheelbase: 239mm (long wheelbase L).
– The shape of the Fiat 131 Abarth Rally Olio is amazingly recreated in lightweight, durable transparent polycarbonate.
– Additional body parts moulded in plastic reproduce side mirrors and the rear wing.
– The MF-01X chassis is at home on the road or on clay, thanks to the double wishbone suspension on all four wheels.
– The polycarbonate light shields are compatible with 5mm LEDs sold separately.
– Stickers are included to recreate the model’s livery and logos.
– A range of optional parts allow you to customise your MF-01 chassis
– Electronic ESC controller, Transmitter, Receiver, Steering servo, Battery and Charger are sold separately.

The glorious 1980s Honda 500 Turbo in 1/12 scale is coming back in limited production.

Get on Board!
Now you can make your own monorail with this exciting kit! It trundles along a single rail, and even reverses direction when it reaches a pre-set point. Using separately sold parts you can customize it in many ways, such as suspending it from an overhead rail. It features a gearbox in the front car and a battery box in the rear car. Includes all parts needed for snap-fit, screw-together assembly.

About the Model
★Includes two 210mm length rails, and two white paper assembly type bodies. ★Requires one R03/AAA/UM4 battery (sold separately). ★Click here to download a PDF with the body template for printing out.

Packaging

R/C Models
　58712　　1/10 R/C Porsche 911 GT3 (992) (TT-02)

Static Models
　35383　　1/35 Japan Ground Self Defense Force Type 16 Mobile Combat Vehicle C5 with Winch
　60792　　1/72 Lockheed Martin® F-35®A Lightning II®
　60101　　Chasmosaurus Diorama Set
　60103　　Parasaurolophus Diorama Set
　60201　　Triceratops Eurycephalus
　60202　　Stegosaurus Stenops
　60203　　Tyrannosaurus Rex

Kids
　95156　　HG Carbon Rear Brake Stay (1.5mm) J-Cup 2023
　95162　　Super Hard Low-Profile Tire & Wheel Set (Spiral) J-Cup 2023
　15515　　Short Mass Damper Block (6x6x14mm/2pcs.)
　95424　　2mm Aluminum Lock Nut (Green, 5pcs.)
　95497　　HG 13mm Tapered Aluminum Ball-Race Rollers (Ringless)
　95556　　2mm Aluminum Lock Nut (Orange, 5pcs.)

Tools & Paints
　70254　　Monorail Train
　70255　　Rail Set (for Monorail Train)

47490 1/10 RC Toyota Land Cruiser 40 Yellow Painted Body (CC-02)
47493 1/10 RC Mercedes CLK AMG Racing Version Silver Painted Body (TT-02)
58441 1/10 RC Buggy Champ (2009)

his kit reproduces the Ford Focus RS in the Custom livery that debuted in 1998.
In 2003, Ford Motor Co. chief engineer Christian Loriaux made various changes such as seat position, roll cage and suspension to the Ford Focus and improved aerodynamics with an updated bumper shape, position of the bonnet louvres and large rear wing and more.
The turbocharged 2-litre inline-four engine was capable of delivering 300hp and 550Nm.
This rally car secured second place in the Constructors’ Championship four times in seven years and showed its strength.
This time, the kit recreates a customised road version without sponsor logos.

Model features:
– Radio-controlled 1:10 scale assembly kit. Length: 427mm, width: 185mm, height: 145mm. Wheelbase: 257mm.
– The bodywork is made of sturdy 1mm polycarbonate that faithfully reproduces the line of the Focus. RS from 2003.
– The ABS moulded plastic parts realistically represent the side mirrors and rear wing.
– The model uses the efficient 4WD TT-02 chassis with simple construction and limited maintenance transmission.
– The white 16-spoke wheels are matched to radial racing tyres with tread.
– Comes with stickers and masking sheet for use during painting.
– RC system sold separately: ESC controller, transmitter, receiver, servo, battery and battery charger.