Full scale Tamiya Wild One MAX car coming in 2022


THE TAMIYA WILD ONE IS MAKING A COMEBACK IN 2022
Ask any child of the 1980s what names like the Hornet, Lunchbox, Sand Scorcher & Avante meant to them, and they will likely reminisce about the joys of building and driving the 1/10th scale Radio Controlled cars of their childhood.
The original Tamiya Wild One (58050) was released in 1985 and became one of the brand’s most iconic models. Such was the popularity of the model it was even re-released in 2012 (58525) to further acclaim.
Now, we are delighted to announce that the Wild One will make its return a decade later – only this time, with a difference.

BUILT FOR ADVENTURE
The Little Car Company are developing the Wild One MAX for release in 2022 under Licence from Tamiya. Rather than being 1/10th scale, the Wild One MAX will be an impressive 8/10th scale, and you will not need an R/C controller, because it is big enough to drive yourself!
Yes, that’s right, developed in partnership with the company behind the Bugatti Baby II and Aston Martin DB5 Junior, the Wild One MAX will be a rear-wheel drive, off road electric buggy. At approximately 3.5m long, 1.8m wide and weighing around 250kg, the Wild One MAX will take up a bit more space than the R/C kits of the past. But just like the original, you get the opportunity to assemble these models at home.

SPECIFICATIONS
Rear wheel drive
Top speed from 48 km/h (30mph)
Peak power from 4kW (5.5 bhp), with a range starting at 40km (25 miles)
15” off road tyres
Hydraulic Brembo disc brakes with regenerative braking
Adjustable driving seat
Racing steering wheel and digital gauges
Multiple driving modes to suit all types of drivers
Lots of Hop-Ups including faster top speeds, more power and even the opportunity to convert your Wild One MAX to be road legal in some countries!

YOUR WILD ONE MAX
Be the first to receive a Wild One MAX when the project is launched in 2022. Prices are expected to start from £6,000.
Pre-order today by placing a fully-refundable deposit of £100.
We will email you with exciting updates as the project develops.


Source and preorder: The Little Car Company

Introducing Tamiya RC May new products like TA8 PRO, Tamiya Grand Prix, Tamiya RC Photocon and Tamiya RC High-Tech Course



・ Introducing new Tamiya RC products to be released in April and May. Pay attention to the powerful “Arox dump truck”!
・ Rick-kun will participate in the “Tamiya Grand Prix” held at the Kakegawa circuit in April! I will report the pattern.
・ [Special plan] Live broadcast of “TA08 PRO” !!


・ Announcement of the progress of “Tamiya RC Photocon”, which is currently recruiting posts on Twitter! Introducing notable works and advice for those who are thinking about posting.
・ The popular Tamiya RC high-tech course explains the effects and adjustment methods of the “stabilizer”. The range of settings can be expanded by using the stabilizer!

Appearance
Tamiya Satoshi Maezumi, Riku Sunahara, Takayuki Kono
Click here for YouTube live streaming

Tamiya RC Holiday Meeting Live Broadcast, Introduction of Tamiya RC Car Grand Prix and Tamiya RC History 8 & 9



・ The “Holiday Meeting (morning section)” held at the Tamiya Circuit will be broadcast live from the venue. Introducing your car and driving scene.
・ Introducing the pattern of the “Tamiya RC Car Grand Prix” held on 4/4 (Sun). Interviews with the final races and winners of the Junior, Women’s Grand Prix and Pair Grand Prix!
・ Introduction of Tamiya RC History ⑧. The popular “Mighty Frog” is still available as a reprint model!


・ The “Holiday Meeting (afternoon)” held at the Tamiya Circuit will be broadcast live from the venue. Don’t miss the parade run where various machines run in a mess!
・ Introducing the pattern of the “Tamiya RC Car Grand Prix” held on 4/18 (Sun). Pay attention to the close junior grand prix final race!
・ Introduction of Tamiya RC History ⑨. “Grasshopper” and “Hornet” that caused the buggy boom of the 80’s will also appear !!

Appearance
Tamiya Satoshi Maezumi, Riku Sunahara

Tamiya Mini 4WD Live Vol.3 presenting new releases



We will feature the new Mini 4WD products announced at the 59th Shizuoka Hobby Show held on May 13th and 14th, 2021.
Furthermore, a thorough report on the Japan Cup 2020 Satellite Osaka Tournament held the other day!

“Mini 4WD Academy”, which deepens understanding, explains the chassis that was born after “FM chassis”, which still has many fans.
In addition to new product information, we will be the first to introduce the latest information on YouTube Live.
You can post comments and ask questions during the live stream, so please join us in the program as well.

Appearance
・ Mini 4WD public relations: Master Ueda
・ Mini 4WD event staff: Ushiyama

Tamiya 58685 Comical Hotshot GF-01CB overview video

The 58685 Hotshot is our latest release on the Comical platform. It features a shortened, toon body on the GF-01CB 4WD chassis complete with a pre-painted body, Hotshot livery, large rear wing and dual antennas. Oversized offroad tires are standard as are the two-piece, dual-color wheels. This model comes with a 540 brushed motor and our new TBLE-04S ESC.

Features:
• 1/10 scale R/C model assembly kit.
• Includes a lightweight and durable stylized polycarbonate version of the Hotshot body and wing, developed specially for this model. The body is pre-painted in PS-2 Red. Stickers based upon the 2007 re-issue Hotshot are included for decoration.
• Stylish bumper and muffler parts are included, as well as dedicated side guard components.
• Separately sold 5mm LEDs can be used to light up the model. Light pods are included.
• ST block bubble tires have stepped block patterns (width/diameter: front 45/99mm, rear 55/99mm).
• The GF-01CB chassis offers efficient gear-driven 4-wheel drive.
• ABS two-part wheels have red and white spoke parts.
• CVA Super Mini oil dampers molded in red ensure your ride has superior cushioning.
• A rear wheelie bar lets you perform thrilling wheelies by slamming on the throttle.
• Includes 540-brushed type motor.
• Includes NEW TBLE-04S ESC. Compatible with brushless motors (sensored) of 21.5 turns and higher, and Tamiya brushed motors 25 turns and over.
• Requires: 2-channel radio, steering servo, 7.2-7.4volt battery pack and compatible charger.
• NOTE: Must use round type stick battery pack. Square shaped batteries will not fit the battery compartment.

Source of video: Tamiya USA

Tamiya 24360 1/24 Nissan Fairlady 240ZG photo and details


This 1/24 scale model kit recreates a classic Nissan sports car! This all-new tool for this scale depicts the legendary Fairlady 240ZG, the top-grade variant of the 240Z – an export version of the Fairlady that had a 2.4-liter engine. Released in 1970 around the world, the 240ZG was accented with the longer “G nose,” FRP over- fenders and headlamp covers. The drag coefficient was an astounding 0.390, helping the car achieve an eye- watering top speed of 210km/h.

• 1/24 scale plastic model assembly kit. Length: 180mm, width: 71mm, height: 53mm.
• ALL-NEW Tooling! All parts designs were made anew for this model using extensive research of the full-size car.
• Features a realistic depiction of the engine and movable engine hood with hinge.
• Includes separate metal-plated parts for window frame sections, headlight cover frames and plated trim of wheel covers for a super realistic finish, and a hassle-free paint job.
• Depicts full interior.
• Chassis underside and suspension are accurately depicted with an ergonomic parts breakdown.

Tamiya 70244 Swivelbot official product video



★This assembly kit creates a model which moves on two smaller front and two larger rear wheels, swiveling to the right when it meets obstacles such as walls. This unique movement is produced by the crown gearbox which moves the front wheels. ★Swivelbot moves forward when the way ahead is clear, and when it hits an obstacle, the front wheels stop and the crown gearbox turns to the right until the way is clear again. ★This model features a unique rounded body with semicircular bumper and front/rear wheels molded in light violet ABS resin. ★The top antenna also moves. ★Includes everything needed for easy snap-fit/screw-together assembly. Comes with stickers to decorate the model. ★Length: 102mm, width: 90mm, height: 82mm. Includes mini motor and requires R03/AAA/UM4 battery (x1) (sold separately).

Tamiya 58690 Landfreeder Quadtrack TT-02FT overview video



The Landfreeder Quadtrack is our newest release on the TT-02 chassis. Fitted with a Quadtrack system, this TT-02 gains the FT designation, or Four-Track.

In this video, we take a look at what comes in our Landfreeder kit. We also discuss the features of the Quadtrack system, the parts list of the TT-02 as well as some info on the new TBLE-04S ESC that now comes standard in every kit.

Features:
• 1/10 scale R/C model assembly kit. Length: 425, width: 247mm.
• The Landfreeder body comes molded in polycarbonate, pre-painted Black (PS-5) and with Smoke (PS-31) painted windows. Separate plated parts recreate grille cover, fog lamps and roll bar.
• The TT-02FT is a variant of the TT-02 chassis, with four tracks on its suspension.
• Each of the three-sided track units is 39.3mm in width and has a contact area of 60mm length. Tracks require assembly from link parts, and offer efficient traction.
• Two types of elastomer track link (standard and grouser) are included for setup options.
• Track units are attached to suspension arms via plates, and each features a sprocket and four rollers. The third roller is sprung to further enhance performance.
• Polycarbonate chassis cover and wheel well liners give protection from dust and dirt encountered during off-road driving.
• TT-02 four-bevel differentials and identical suspension arms are used.
• Includes 540-brushed type motor.
• Includes NEW TBLE-04S ESC. Compatible with brushless motors (sensored) of 21.5 turns and higher, and Tamiya brushed motors 25 turns and over.
• Requires: 2-channel radio, steering servo, 7.2-7.4volt battery pack and compatible charger.

Video source: Tamiya USA