44052 1/10 GP Raikiri – TG10-Mk.2FZ Chassis

According to unconfirmed rumours:

★ Full set
★ Factory finished, ready to run
★ Runs on 4 AA batteries
★ 2WD Buggy
★ 370 motor size
★ New body is designed from Mr. Nezu Kota that also designed that of Astral Star Raikiri
★ Racing spec is also considered

As written above these are unconfirmed rumors, final spec will be revealed in the Shizuoka Hobby Show in mid May.

31567 1/700 Battle Of Surigao Strait Set

SK Japan prize information site “take character” is Co., Ltd., “take four wheel drive mini × character” DreamMachine “campaign” popular vote planning was held in 2014 fall in, and become the first place in response to the strong support from many fans Brocken Gigant was is, you appeared as a promise Street “launched a machine which became # 1 on the prize limit specification”, prize dedicated machine “Brocken Gigant 21st Century Edition.”
Super FM chassis that becomes the prize first appearance two-color fluorescent orange and white. I will expand in combination with the body four colors, including a clear system 2 colors.
Also this time, special body Puromodera Hasegawa Shinji-san worked hits, offer gift planning even for a limited time. Come to this opportunity, please carry your feet to retailers!

Than the end of April, it appeared as crane game prize in amusement arcades nationwide. Stores, etc., refer to the details, SK Japan prize information site “take character”. Ltd. SK Japan prize information site “take Chara” http://charatoru.skj.jp/

Contact for this matter
(Ltd.) SK Japan TEL 03-5806-2122 AM Division Product Planning Division addressed to
SK Japan website　http://www.sk-japan.co.jp/

58614 1/10 R/C Suzuki Jimny (JB23) (MF-01X)

Three wheel base further widen the play!
Compact shaft drive 4WD model is new!

★ Compact M orthodox play tough in the chassis size! “MF-01X” chassis
Choosing a travel location in handy size “involuntarily want become Tsuredashi to play” has been developed on the concept of “MF-01X” chassis. The main frame is a monocoque structure that is integral to the gear box, and both light weight and high rigidity. The middle of the chassis of the horizontal battery, I’ve realized the shaft 4WD compact size in the rear motor layout. Equipped with tire of touring car size to 4-wheel double wishbone suspension, and finished in the “play” chassis you do not choose a place to run. Also, change the spacer is joint to the chassis, it is three wheelbase by combining shaft released simultaneously selectable.

★ The body is a Choice “Suzuki Jimny”
Compact and fit the chassis concept that can play tough, and chose “Suzuki Jimny” the body. Yet light car, and model the popularity of JB23 type to be full-fledged 4WD cross-country diversity to the base of the competition vehicle and customized car as vehicle. To “MF-01 X chassis” on compact M size, 1/10 in combination with the touring car the size of the rally block tires, perfect for the Jimny running around to healthy image. Even customize the vehicle as well machine to their liking good, also take out the leisure accompany good, it is one that easily can taste the fun of hobby RC car.

★ To transfer the motor power that was installed in the Riyaendo in front in the chassis side of the shaft.
Simple main frame of the monocoque structure also an integrated gear box, I was also pursuing ease of assembly.

★ 3 types of wheel-based can be selected
3 replace the mainframe central spacer block formed in a split, the wheelbase of the three by combining the different lengths of the simultaneous release shaft can be selected. You can also enjoy in combination with existing M chassis body.
S Wheelbase: 210mm
M Wheelbase: 225mm (Jimny)
L Wheelbase: 239mm
★ wheelbase change for propeller shaft also released simultaneously planned

42288 1/10 R/C TRF211XM Chassis Kit
New materials of the industry’s first adoption change the run!
Off-road racing user attention, appeared chassis kit “TRF211XM” which has made ​​the state-of-the-art evolution!
With the aim of success in the future of off-road scene, and developed a machine that employs the industry’s first new material! !
Showed a runner results in recent memory in 2013 IFMAR off-road world championship “TRF201XMW”.
To respond to this machine to always off-road scene to continue to evolve, to adopt the industry’s first new material chassis developed “TRF211XM”,
we aim to flagship of a new off-road.
off-road scene the high speed of the advance. Improvement of grip force will grip the maneuverability of the key.
New materials of bathtub chassis that has been adopted aims to grip improvement achieved with no running feeling ever.
Grip force and response force has been greatly increased by adopting the material of the chassis that combines the strength and elasticity.
In addition, the chassis layout for that support a variety of battery, the race in the top category of course,
also active in the Tamiya off-road All Japan Championship Tamiya sponsored making it the promise can be one.
Worked in various situations inevitable! !
High chassis capacity will demonstrate a wide range of adaptability! !
★ New design Riyasutefuna battery Steph donor battery plate, brass (brass) is adopted suspension mounts & Cooling slipper plate.
Parts involved in the chassis rigidity to suit the new chassis is the new design.
And has adopted the new suspension mount to secure the grip.
In addition, slipper plate has been designed aimed at cooling effect.
★ high strength, high elasticity and high impact resistance to the excellent new material “Quick Form (R)” adoption of the bathtub chassis! !
New of the new generation material “Quick Form (R)”.
The material is that combines the benefits of metal and resin in high performance stampable sheet to balance the physical properties and moldability.
Despite the material of high strength, is the material most suitable for off-road chassis also notable to say that super-lightweight.

42289 1/10 R/C TRF102 Chassis Kit
Adopted new T-bar-type rear suspension for independent control the roll and pitch
to exhibit excellent road surface follow-up in the race “TRF102 chassis kit” appeared!
Tamiya Grand Prix, etc., in a variety of road conditions, it is 2WD Formula chassis has been developed so that it can be exhibited consistently high driving performance.
And equipped with a roll point ball and pitching shaft, adopted the new T-bar-type rear suspension that the roll and pitch can be completely independently control each.
I will deliver outstanding road surface follow-up. Furthermore traction battery floating mount fixed to 2.0mm thick carbon upper deck.
I pull out the center on both sides cut of 2.5mm thick carbon Lower deck put the bending to the maximum.
[Accessories Parts]
★ TRF102 dedicated carbon Lower deck (2.5mm thickness)
★ TRF102 dedicated carbon upper deck (2.0mm thickness)
★ TRF102 dedicated Aluminum Servo stay
★ TRF102 dedicated aluminum motor mount
★ TRF102 dedicated rear suspension (T bar set)
★ TRF damper
★ OP.1161 F104 low friction suspension ball set
★ OP.1357 F104 adjustable metal upright set
★ SP.1000 High Torque Servo Saver (Black)
★ def plate-integrated carbon rear shaft
★ strengthening type front suspension arm
★ Front pointed to King pin coil spring independent of the left and right.
By making the reinforcing type suspension arms, and has a balance that can be used more bending of the entire chassis.
Steering servo uses a new type aluminum servo mount and carbon steel bridge that is lighter, securely fixed by screws.
Furthermore servo mount was optimizing the mounting rigidity of the chassis.
★ In order to maximize the bending of carbon Lower deck, adopted a floating mount to fix the traction battery to carbon upper deck.
And to achieve a substantial suspension stroke up, creating a handling a sense of stability in smooth.
In addition, expanding the mechanical mounting space compared to TRF101. I have increased the degree of freedom of choice and layout of electrical equipment.
★ Adopt new T-bar-type rear suspension that provides a complete independent control of pitch and control.
Roll point ball is set to chassis limit low position, and maximize the roll moment.
Furthermore pitching shaft is completely self-contained, I have to ensure a smooth moving to the road surface gap.
In addition, the new motor mount was made ​​possible to adjust the mounting position of the rear wing.

【 R/C Models 】
★ New Entry R/C Car (Tentative)
★ 1/10 R/C Glow-Engine Car (TG-10-Mk.2FZ) (Tentative)
★ 1/10 R/C Suzuki Jimny (JB23) (MF-01X)
★ 1/10 R/C Nissan GT-R LM Nismo Launch Version (F103GT) (Tentative)
★ 1/10 R/C TB-04R Chassis Kit
★ 1/10 R/C TT-02D Type-S Drift Spec Chassis Kit
★ 1/10 R/C TRF102 Chassis Kit
★ 1/10 R/C TRF211XM Chassis Kit
★ 1/10 R/C Mercedes-Benz UNIMOG 425 (CC-01)
★ 1/10 R/C Toyota FJ Cruiser (CR-01)
★ 1/10 R/C TT-02B MS
★ 1/10 R/C Porsche GT2 Racing (TA02SW)
★ 1/10 R/C Buggy Kumamon Version (DT-02)
★ 1/10 XB R/C Buggy Kumamon Version (DT-02) (Green, Yellow, Black, Red)
★ 1/10 XB Volkswagen Scirocco GT (TT-01D Type-E) Drift Spec
★ [OP] TT-02 Type-S Carbon Damper Stay (Rear)
★ [OP] TT-02 Type-S Carbon Damper Stay (Front)
★ [OP] TT-02 Type-S Steel Suspension Mount Set
★ [OP] Aluminum Camber Gauge Post
★ [OP] TT-02 Type-S Steel Suspension Mount (Front)
★ [OP] TT-02 Type-S Steel Suspension Mount (Rear)
★ [OP] TT-02 Type-S Steel Rebound Stopper (2pcs.)
★ [OP] 1/10 Scale Glow-Engine Car New Wing Parts Set (Tentative)
★ [OP] MF-01X Ball Bearing Set
★ [OP] GF-01 Aluminum Servo Lowering Guard
★ [SP] 1/10 Scale Glow-Engine Car New Body Parts Set (Tentative)
★ [TRF] Aluminum Parts Tray
★ [TRF] TRF419 Aluminum Lower Deck (Tentative)
★ [LE] M-05 Blue Pattern Carbon Damper Stay (Front)
★ [LE] M-05 Blue Pattern Carbon Damper Stay (Rear)
★ [LE] TB-04R Titanium Screw Set
★ [LE] TRF102 Titanium Screw Set

【 Scale Models 】
★ 1/32 De Havilland Mosquito FB Mk.VI (Tentative)
★ 1/35 German Tank Panther Ausf.D
★ 1/35 Scale German Panther Ausf.D Metal Gun Barrel Set
★ 1/35 Scale German Panther Ausf.D Separate Track Link Set
★ 1/35 Scale German Panther Ausf.D Photo-Etched Grille Set
★ 1/35 German Heavy Armored Car Sd.Kfz.234/1 w/2cm Gun
★ 1/35 WWI British Infantry w/Small Arms & Equipment
★ 1/48 German 3ton 4×2 Cargo Truck
★ 1/700 U.S. Navy Aircraft Carrier CV-3 Saratoga (w/Pontos Model Detail Up Parts) (Tentative)
★ 1/24 Toyoda Model AA
★ 1/24 Honda S600
★ 1/12 Team Lotus 49B 1968 (w/Photo-Etched Parts)
★ 1/12 Honda RA273 (w/Photo-Etched Parts)
★ 1/12 Kawasaki ZZR1400 US Special Color Edition
★ 1/12 Honda MVX250F
★ 1/12 Yamaha YZR500 (0W70) Taira Version
★ 1/24 Toyota Land Cruiser 80 VX Limited
★ 1/24 Toyota Land Cruiser 80 w/Sport Options
★ Braided Hose (2.0mm Outer Diameter)
★ Braided Hose (2.6mm Outer Diameter)

【 Mini 4WD & For Kids 】
★ Avante Mk.III Japan Cup 2015 Limited Edition
★ Hyper-Dash 3 Motor J-Cup 2015 Special
★ Hyper-Dash Motor PRO J-Cup 2015 Special
★ Mini 4WD Portable Pit Japan Cup 2015
★ Shooting Proud Star (MA Chassis)
★ Mini 4WD Starter Pack AR Speed Spec (Aero Avante)
★ Mini 4WD Starter Pack MA Power Spec (Blast Arrow)
★ Aero Avante Violet Special (Clear Body) (AR Chassis)
★ Shadow Shark Yellow Special (AR Chassis)
★ Veldaga Clear Body Set
★ Low-Profile Tire & Wheel Set (Y Spoke)
★ Torque-Tuned 2 Motor
★ Rev-Tuned 2 Motor
★ Atomic-Tuned 2 Motor
★ Torque-Tuned 2 Motor PRO
★ Rev-Tuned 2 Motor PRO
★ Atomic-Tuned 2 Motor PRO
★ Side Mass Damper Set (for MA Chassis)
★ Low-Profile Offset Tread Tires (Hard/Yellow)
★ Low Friction Low Profile Tire (Maroon, 2pcs.)
★ HG Lightweight 19mm Aluminum Ball-Race Rollers (Ringless/Pink)
★ Brake Set (for AR Chassis) (Purple)

【 Tools & Paints 】
★ Sharp Pointed Side Cutter for Plastic (Slim Jaw)
★ Craft Scissors (for Plastic/Soft Metal)
★ Tamiya Modeling Brush PRO II Pointed Brush (Ultra Fine)
★ Tamiya Modeling Brush PRO II Pointed Brush (Extra Fine)
★ Tamiya Modeling Brush PRO II Pointed Brush (Fine)
★ Tamiya Modeling Brush PRO II Pointed Brush (Small)
★ Masking Tape for Curves 2mm
★ Masking Tape for Curves 3mm
★ Masking Tape for Curves 5mm

The XB Version will be in the colours red, black, green and yellow.

More information here

Scale Models
★ 1/32 De Havilland Mosquito FB Mk.VI [tentative]
★ 1/35 in Germany Panther D-type [tentative]
★ 1/35 Panther D metal barrel set [tentative]
★ 1/35 Panther D articulated track set [tentative]
★ 1/35 Panther D etched parts [tentative]
★ 1/35 German Heavy armored car Sd.Kfz.234 / 1 (2cm gun-mounted)
★ 1/35 WW I British infantry and small arms fire set
★ 1/48 German 3t cargo truck [tentative]
★ 1/700 US Navy aircraft carrier Saratoga CV-3 (with Pontus model manufactured by detail Up Parts) [tentative]
★ 1/24 Toyoda AA type
★ 1/24 Honda S600
★ 1/12 team Lotus type 49B 1968 (with etching parts)
★ 1/12 Honda RA273 (with etching parts)
★ 1/12 Kawasaki Ninja ZX-14 Special Color Edition
★ 1/12 Honda MVX250F
★ 1/12 Yamaha YZR500 (OW70) flat Tadahiko specification
★ 1/24 Toyota Land Cruiser 80
★ 1/24 Toyota Land Cruiser 80 sports options
★ detail up parts mesh pipe outer diameter φ2mm / φ2.6mm

RC Models
★ New entry RC car first wave [tentative]
★ TG-10 Mk.2 FZ New with body [tentative]
★ RCC Jimny (JB23) (MF-01X)
★ RCC NISSAN GT-R LM NISMO Launch version (F103GT) [tentative]
★ RCC TB-04 R chassis kit
★ RCC TT-02D TYPE-S drift spec chassis kit
★ TRF102 chassis kit
★ TRF211XM chassis kit
★ RCC Mercedes-Benz Unimog 425 (CC-01 chassis)
★ RCC Toyota FJ Cruiser (CR-01 chassis)
★ RCC TT-02B MS
★ RCC Porsche 911 GT2 racing (TA02SW chassis)
★ RC Buggy Kumamonbajon (DT-02)
★ XB RC Buggy Kumamonbajon (DT-02 ) (4 colors)
★ XB Volkswagen Scirocco GT (TT-01D chassis TYPE-E) drift spec
★ OP.1632 TT-02 TYPE-S carbon damper stay (front)
★ OP.1633 TT-02 TYPE-S carbon damper stay (rear)
★ OP.1634 TT-02 TYPE-S steel suspension mounts set
★ OP.1635 aluminum camber gauge (stick type)
★ OP.1636 TT-02 TYPE-S steel suspension mounts (front)
★ OP.1637 TT -02 TYPE-S steel suspension mounts (rear)
★ OP.1638 TT-02 TYPE-S Steel rebound stopper (two)
★ OP.1641 option wing set for engine car body [tentative]
★ OP.1643 MF-01X full Bearing Set
★ OP.1644 GF-01 Aluminum Servo guard & down mount [tentative]
★ SP.1578 TG-10 Mk.2 FZ New Body Set [tentative]
★ aluminum parts tray
★ TRF419 aluminum Lower deck [tentative]
★ M- 05 Blue carbon damper stay (front)
★ M-05 Blue carbon damper stay (rear)
★ TB-04 R titanium screw set
★ TRF102 titanium screw set

Mini 4wd & For Kids
★ Avante Mk.III Japan Cup 2015 Limited ( MA chassis)
★ Hyper Dash 3 motor J-CUP 2015 Special
★ Hyper Dash Motor PRO J-CUP 2015 Special
★ four wheel drive mini portable pit J-CUP 2015 [tentative]
★ shooting Proud Star (MA chassis)
★ four wheel drive mini starter pack AR speed type (Aero Avante) [tentative]
★ four wheel drive mini starter pack MA power type (blast Arrow) [tentative]
★ Aero Avante Violet Special (clear body) (AR chassis)
★ shadow Shark yellow Specials (AR chassis)
★ GP .482 Berudaga clear body set
★ GP.483 low height Tire & Wheel Set (Y spoke)
★ GP.484 torque tune 2 motor
★ GP.485 Rebuchun 2 motor
★ GP.486 atomic tune 2 motor
★ GP.487 torque tune 2 motor PRO
★ GP.488 Rebuchun 2 motor PRO
★ GP.489 atomic tune 2 motor PRO
★ GP.490 MA chassis side mass damper set
★ low height offset tread tire hard (yellow)
★ low friction low height tire (two Maroon)
★ HG lightweight 19mm all-aluminum bearing rollers (Pink) [tentative]
★ AR chassis brake set (Purple) [tentative]
★ low friction front under guard (Purple) [tentative]
★ four wheel drive mini carry pit ★ flywheel car tool set [tentative]
★ swim Manta Ray tool set [tentative]

Tool & Paints, etc.
★ tapered thin blade Nipper (gate cut)
★ craft shears (plastic / for soft metal) [tentative]
★ Tamiya modeling brush PRO II countenance brush (ultra-fine / very fine / thin / small)
★ curve for masking tape (2mm / 3mm / 5mm)

58615 Dune Buggy Kumamon (DT-02 Chassis)

– Nimble running of 2WD unique from on-road to off-road!
– The popular with women and children! Family I enjoy everyone.

– Electric radio control carrying the [Kumamon] doll in electric radio control two-wheel drive buggy dune buggy is a car assembly kit.
– Lightweight open body with no door is made of high impact resin, can be freely painted in color for plastic model.
– Also, hold the handle was riding in the driver’s seat [Kumamon] doll set with painted finished state.
– And illustrations of Kumamon that stick to the body, I was prepared in Kumamoto Prefecture of specialty tomatoes and watermelon illustrations such as stickers as well.

– DT-02 chassis, which was equipped with a four-wheel double wishbone suspension.
– Configuration easy assembly with reduced number of parts also features.
– Adopt a bathtub frame that low center of gravity by mounting the RC mechanism and traction battery flat.
– Suspension 4-wheel double wishbone moving supple.
– Is equipped with four coil spring unit will deliver the high road holding even in bad road.
– In addition, the built-Diff in sealed gear box to shut out the inherent of sand and pebbles of intrusion into off-road, with a 380 motor.
– You can enjoy a long and spacious runs in easy to control speed.
– Kumamon figure prepainted. It is also possible to move the head from side to side.

84399 RCC Porsche 911 GT2 Racing (TA02SW Chassis)

– A firm favorite of Porsche 911GT2 re-appeared!
– Of short wheelbase and rear wide tread powerful style

– Glamorous hip line Porsche of true value at any time of the era.
– In which the 911 GT2, which has been developed in order to fight the sports car race from ’95 also machines that still popular with its charming style.
– Unique shape at both ends raised front spoiler, large rear wing, and I was reproduced a lacy form wearing a over fender to real back and forth.

– Adopt TA02SW that best matches the Porsche 911 GT2 unique short wheelbase to characteristic dimensions of the rear wide tread of the chassis.
– Parts configuration with a balanced layout and high rigidity of the balance which became the forerunner of the shaft drive 4WD touring car is still demonstrate the high dimensionality of the driving performance, it is an item you want is also recommended as a collector’s item.

These are a automatic translations. Please excuse possible misinterpretations in the text.

RC Models & Parts
42288 TRF211XM
58614 RCC New M Size 4WD Chassis (Body:Suzuki Jimny)
58615 RCC Dune Buggy Kumamon (DT-02 Chassis)
84399 1/10 RCC Porsche 911 GT2 Racing (TA02SW Chassis)
84418 1/10 RCC TT-02B MS
51578 SP1578 TG-10 Mk.2 FZ New Body Set
54636 OP1636 TT-02 TYPE-S Steel Suspension Mount (Front)
54637 OP1637 TT-02 TYPE-S Steel Suspension Mount (Rear)
54638 OP1638 TT-02 TYPE-S Steel Rebound Stopper (2pcs.)
54641 OP1642 Engine Car Body Option Wing Set
54642 OP1642 Carbon Damper Stand
54643 OP1643 New M Size Full Bearing Set for 4WD Chassis
54644 OP1644 GF-01 Aluminum Servo Guard & Down Mount
84417 TRF102 Titanium Machine Screw Set

Static
12053 Lotus 49B F1 w/Etched Parts
12664 Metal Gun Barrel Set for Panther Ausf.D
12665 Articulated Caterpillar Set for Panther Ausf.D
12666 Etching Parts for Panther Ausf.D
24339 Toyota AA Type
25179 USN Aircraft Carrier CV-3 Saratoga (w/Detail Up Parts Set for Pontos Model
32585 German 3t Truck
35345 German Medium Tank Panther Ausf.D
37019 German Heavy Armored Car Sd.Kfz.234/1 (w/2cm Gun)
60326 ★de Havilland Mosquito FB Mk.VI

Mini 4WD
15484 GP484 Torque-Tuned 2 Motor (Mini 4WD)
15485 GP485 Rev-Tuned 2 Motor
15486 GP486 Atomic Tune 2 Motor
15487 GP487 Torque-Tuned 2 Motor PRO
15488 GP488 Rev-Tuned 2 Motor PRO (Mini 4WD)
15489 GP489 Atomic Tune 2 Motor PRO
18641 Shooting Proud Star (MA Chassis)
95084 Hyper Dash III Motor J-CUP 2015 Special
95085 Hyper Dash Motor PRO J-CUP 2015 Special
95086 Mini 4WD Portable Pit J-CUP 2015
95087 Avante Mk.III Japan Cup 2015 Limited (MA Chassis)
95210 Mini 4WD Starter Pack AR Speed Type (Aero Avante)
95211 Mini 4WD Starter Pack MA Power Type (Blast Arrow)
95213 HG Light Weight 19mm Aluminum Bearing Roller (Pink)
95214 AR Chassis Brake Set (Purple)
95215 Low Friction Front Under Guard (Purple)

Tools & Construction
70217 Flywheel Car Assembly Kit
70218 Manta Ray Swim Assembly Kit
74123 Fine Point Thin Blade Nipper (for Gate Cut)
74124 Craft Scissors (Plastic/for Soft Metal)