Tamiya 18651 Dancing Divine Doll – Mini 4WD MA Chassis

Dancing Divine Doll

The Dancing Divine Doll (Japanese: ダンシングディバインドール, Danshingu Dibain Dōru), also known as DDD (Japanese: DDDダンシングディバインドール, Danshingu Dibain Dōru) in the manga, is the upcoming Mini 4WD PRO car to be released by Tamiya in 2018.

It was featured in the manga Hyper Dash! Yonkuro as Rinko Sumeragi’s machine.

Dancing Divine Doll
General
No. Unknown
Series Mini 4WD PRO
Chassis(s) MA Chassis
First Released 2018
In fictional media
First Appearance Hyper Dash! Yonkuro
Owner Rinko Sumeragi

The Dancing Divine Doll (Japanese: ダンシングディバインドール, Danshingu Dibain Dōru), also known as DDD (Japanese: DDDダンシングディバインドール, Danshingu Dibain Dōru) in the manga, is the upcoming Mini 4WD PRO car to be released by Tamiya in 2018.

It was featured in the manga Hyper Dash! Yonkuro as Rinko Sumeragi’s machine.

General info

As with other Hyper Dash Machines, the Dancing Divine Doll features the modernized and sharper design based on the original Dancing Doll.

The side, stylized vertical fins were protruded from the front nose, with small head lamps on them. Taking the design clues from both Rise-Emperor and Shooting Proud Star, the top fan and the horizon fins on the rear were now a merged, separate piece from the main bodyshell, and incorporating the intake on the front of it. The canopy is now much tinner compare to the Dancing Doll.

The stylized ‘5’ mark and the CoroCoro Dragon decals can be found on the bodyshell. It was mainly in red, with violet, yellow and deep brown stripes mixed onto it.

It was equipped with the white, large-diameter 4-spoke MS-type II wheels paired with the black Avante-type slick tires. The chassis frame and the A parts were molded in grey and violet respectively.

In the manga

Spoiler alert!

This section of the article may contains details concerning the progression of the plot. If you do not want it to be spoiled for you, skip this section!

In Hyper Dash! Yonkuro, Kaidanji Sumeragi shows the Hyper Dash machines to the Dash Warriors members, however, he thinks it’s not the time to give them to his team, much to Yonkuro and everyone’s surprise.

It was only after Dash Warriors passed the first course in a race against the Dark Dominion in Shinkuro’s house (which was taken over by Dark Dominion, much to Shinkuro’s dismay), Rinko finally got the new machine along with other remain members.

Technical info

Length: 156 mm

Width: 97 mm

Height: N/A

Chassis: MA Chassis

Gear Set(s): 4:1

Gallery

Artworks

Base design

Color variants

Type-R by Hiroyuki Takei

Trivia

  • Interestingly, the Dancing Divine Doll shares the initials with Dash-05 Dame the Dancing Doll, another Mini 4WD car that Rinko owns in Shin Dash! Yonkuro

Source

Mini 4WD Wiki

Some upcoming limited Tamiya Mini 4WD releases

95410 Synchro-Master Z9 (VS Chassis)
95419 1/32 Aero Manta Ray Black Special (AR Chassis)
95421 19mm Aluminum Ball-Race Rollers (6-Spoke)
95422 1/32 Mini 4WD Owl GT (MA Chassis)
95425 Avante Mk.III Red Special (MS Chassis)
95429 Large Dia. Stabilizer Head Set (11,15mm) (Blue)
95430 Large Dia. Stabilizer Head Set Blue (17mm) (Blue)
95432 1/32 Fighter Magnum VFX Premium (Super II Chassis)
95434 Stainless Steel Screw Set (15,20,25,30mm) (Black)
95435 Slimline Mass Damper Set (Silver)
95441 Mini 4WD Motor Case2 (Smoke)
95446 Mini 4WD Oval Home Circuit (Two-Level Lane Change) (w/Cyclone Magnum Premium & Hurricane Sonic Premium
95448 Japan Cup Junior Circuit Bank Approach 20 (Orange)
95457 Setting Gauge (Gold)
95458 2mm Aluminium Locknut (Gold 5pcs)
95459 2mm Aluminium Locknut (Dark Blue 5pcs)
95460 Narrow Large Dia. Wheel & Soft Arched Tires (Fluorescent Pink)
95461 Low Friction Front Under Guard (Black)
95473 Mini 4WD Compact Bag (Blue)

Update on Tamiya Japan Cup 30th Anniversary Project Mini 4WD Design Contest

https://www.facebook.com/tamiyainc/videos/235503047137589/

Mini 4WD Design Contest
The total number of submitted images is over 1,000! A lot of power work gathered. Designer Kota Nezu & Takayaki Takayuki and Tamiya staff are almost finished and the results will be announced on September 28 (Friday) on the first day of “All Japan Model Hobby Show”. Please look forward to it!

More information about the contest

Youth with Tamiya Mini 4WD and innovation of next-generation supercomputer automobile design

Original source in Japanese language Sankei News

By making full use of the next generation supercomputer, it may become possible to design cars that could not be thought of with human brains (Illustration · Masako Nishiguchi, Providing vehicle shape data · Suzuki)


When I was an elementary school student, I loved to play with a mini 4WD small motor car model. At that time, the mini 4WD was prevalent among elementary school students, and many children knew the concept of strength, weight reduction, aerodynamics etc. of the vehicle structure thanks to the mini 4WD.

After that, I became a college student, became interested in structural analysis. Structural analysis is to investigate the internal forces and deformations that occur when a structure receives a force from the outside. For example, structural analysis by computer is indispensable in order to improve the comfort of riding by reducing the shaking of the car, or to reduce the fuel consumption while maintaining the strength.

And currently, I am studying the method of structural analysis that can fully utilize the computing capacity of supercomputer (supercomputer) while collaborating with automobile industry. Currently it is difficult to fully utilize the computing capacity of the next-generation supercomputer such as the post “Kyo (Kei)” for the mainstream structural analysis method in the world. However, if we can fully exploit the computing capacity of the next-generation supercomputer, structural analysis that was impossible until now can be realized.

For example, it is possible to investigate the mechanism of unknown phenomena such as the forces inside the vehicle body and the state of deformation by running structural analysis that reproduces a very realistic vehicle structure and running condition. This makes it easier to design cars with higher performance. It is also possible to automatically generate hundreds of design plans with supercomputers, compete each design proposal on a supercomputer, and select the best performance plan. It may be possible to design cars which human brains could not think of.

By the way, when I was an elementary school student, “Let’s Go Go Explosion Brothers! ! “Animation on the theme of mini 4WD was broadcasted, I was looking forward to every week. In the process, scenes to design the car body will emerge by competing the mini 4WD with a virtual test course reproduced on a huge computer. Coincidentally, it is similar to the image of the near future that we are aiming to realize at the next generation supercomputer.

A fictitious design technique that excited his mind when he was a child. It seems like a dream that I am growing up and studying for that realization now. There are still many issues to be solved, but I would like to continue my research to contribute to the development of automobile design technology.

◇

　Hiroshige Nishiguchi (Noriguchi · Koji)　Special researcher at the RIKEN Center for Computational Science, Visiting Fellow at the University of Yamanashi. Doctor (Engineering). In 1985, I was born in Hiroshima prefecture. Hiroshima University graduate school of engineering graduate studies doctor course Late graduation. We are conducting research on structural analysis method using supercomputer and fluid / structure unified analysis method.

Hiroshi Nishiguchi of RIKEN

First official image of Tamiya 58662 Comical Grasshopper WR-02CB

Tamiya 58662 1/10 RC Comical Grasshopper WR-02CB

The original Grasshopper needs little introduction. It was a Tamiya legend which inspired legions of fans since the 1980s. For many, it was their very first introduction into the world of radio control assembly kits. The original Grasshopper is still among Tamiya’s best-selling kits to this day. Now the legend is re-imagined as the Comical Grasshopper, with a new body inspired by the famous original. The re-imagined body sits on a new and dedicated variant of the proven off-road chassis: the WR-02CB.

• 1/10 scale R/C model assembly kit. Length: 356mm, width: 244mm. Wheelbase: 170mm.
• Superb performance both on- and off-road.
• Durable monocoque centerpiece and inline battery pack position, 4-wheel double wishbone suspension and 2-piece steering tie-rod set up.
• Polycarbonate body.
• Sticker design based on the original Grasshopper.
• Includes headlight cases, allowing installation of separately sold 5mm LEDs. They use separate polycarbonate lens components.
• Driver figure included.
• Suspension arms feature multiple damper attachment holes for easily adjustable performance.
• New 2-piece wheels molded in durable ABS.
• New tire design, with rib pattern front and block pattern rear.
• Oil-filled CVA Mini shock units provide superb cushioning, even on rough off-road surfaces.
• Includes Tamiya TBLE-02S ESC (electronic speed control) Capable of running sensor brushless motors and brushed motors alike. (21.5 Turn BL motor limit) (23 Turn brushed motor limit)
• Includes 540-type brushed motor.
• Requires: 2-channel radio, steering servo, 7.2-volt battery pack & charger, and Tamiya PS/TS paint.

SPECIFICATIONS
Bearings Plastic bushing
Body Material Polycarbonate
Body Stickers Included
Chassis Material ABS Plastic
Chassis Type WR-02CB
Construction Type Assembly Kit
Differential Type Gear
Drive Type 2WD
Motor 540-brushed type
Requires A Requires: 2-channel radio, steering servo, 7.2-volt battery pack & charger, and Tamiya PS/TS paint.
Scale 1/10
Shock Damper CVA Oil Filled
Suspension 4-wheel fully independent double wishbone
Terrain Use Multi-Purpose

First details of Tamiya 42326 TA-07 MS Chassis & Tamiya 58662 Comical Grasshopper WR-02CB

Tamiya 42326 1/10 RC TA-07 MS Chassis

The TA07 PRO, is a very popular chassis kit among club racers across the world and one of the most popular machines to use for the Tamiya Championship Series. This version of the platform has been given a significant overhaul endowing it with even greater potential! It is infused with parts designs and concepts from the top-level TRF419XR chassis to create a beast on the racetrack!

• 1/10 scale R/C chassis assembly kit.
• 2.25mm carbon fiber lower deck paired with a 2mm thickness dual bridge-type vertical frame.
• Aluminum bulkheads.
• Retains the 3 selectable motor positions from the TA07 PRO, giving total control over drivetrain setup.
• Features the proven TRF419XR suspension setup, with TRF super short big bore dampers.
• Drive belts and differentials are mounted approximately 2mm lower than standard TA-07 Pro/R for great traction under acceleration.
• New 20T center pulley ensures minimal belt tension yet a highly smooth drive. Standard TA-07 comes equipped with 18T center pulley.
• Final internal drive ratio: 1.85 (TA-07 Pro/R: 2.05)
• Motor position is 1mm toward the chassis center for optimal balance.
• Damper stays for use with standard TRF dampers included.
• Ball-Bearing sway bar mounting system for precise tuning.
• Requires: 2-Channel radio, steering servo, ESC, motor, 7.2-7.4 battery with charger, tires & 190mm body set.

SPECIFICATIONS
Adjustable Gear Ratio Yes
Bearings Shielded ball bearing
Chassis Material Carbon Fiber
Chassis Type TA-07 MS
Construction Type Assembly Kit
Differential Type Gear-Type (Oil-Filled) Rear/ Spool Front
Drive Type 4WD
Requires A Requires: 2-Channel radio, steering servo, ESC, motor, 7.2-7.4 battery with charger, tires & 190mm body set.
Scale 1/10
Shock Damper Aluminum oil filled
Suspension 4-wheel fully independent double wishbone
Terrain Use On-Road

Tamiya 58662 1/10 RC Comical Grasshopper WR-02CB

The original Grasshopper needs little introduction. It was a Tamiya legend which inspired legions of fans since the 1980s. For many, it was their very first introduction into the world of radio control assembly kits. The original Grasshopper is still among Tamiya’s best-selling kits to this day. Now the legend is re-imagined as the Comical Grasshopper, with a new body inspired by the famous original. The re-imagined body sits on a new and dedicated variant of the proven off-road chassis: the WR-02CB.

• 1/10 scale R/C model assembly kit. Length: 356mm, width: 244mm. Wheelbase: 170mm.
• Superb performance both on- and off-road.
• Durable monocoque centerpiece and inline battery pack position, 4-wheel double wishbone suspension and 2-piece steering tie-rod set up.
• Polycarbonate body.
• Sticker design based on the original Grasshopper.
• Includes headlight cases, allowing installation of separately sold 5mm LEDs. They use separate polycarbonate lens components.
• Driver figure included.
• Suspension arms feature multiple damper attachment holes for easily adjustable performance.
• New 2-piece wheels molded in durable ABS.
• New tire design, with rib pattern front and block pattern rear.
• Oil-filled CVA Mini shock units provide superb cushioning, even on rough off-road surfaces.
• Includes Tamiya TBLE-02S ESC (electronic speed control) Capable of running sensor brushless motors and brushed motors alike. (21.5 Turn BL motor limit) (23 Turn brushed motor limit)
• Includes 540-type brushed motor.
• Requires: 2-channel radio, steering servo, 7.2-volt battery pack & charger, and Tamiya PS/TS paint.

SPECIFICATIONS
Bearings Plastic bushing
Body Material Polycarbonate
Body Stickers Included
Chassis Material ABS Plastic
Chassis Type WR-02CB
Construction Type Assembly Kit
Differential Type Gear
Drive Type 2WD
Motor 540-brushed type
Requires A Requires: 2-channel radio, steering servo, 7.2-volt battery pack & charger, and Tamiya PS/TS paint.
Scale 1/10
Shock Damper CVA Oil Filled
Suspension 4-wheel fully independent double wishbone
Terrain Use Multi-Purpose