About the KV-2
In December 1939, the Soviet Union formalized the KV-1 as the next-generation main heavy tank, incorporating many modern equipment such as diesel engines and torsion bar suspensions. The KV-2 is a heavy tank for breaking through positions that further enhances the attack power of this KV-1. The body is based on the KV-1, and the main gun is replaced from a 76.2mm cannon to a huge 152mm howitzer. The turret has become an extremely tall box to ensure internal space. Handing over to the military began in July 1940, and more than 200 vehicles were completed. The KV-2, which struck the German invasion in June 1941, suffered from troubles such as breakdowns due to excessive vehicle weight, but some vehicles fully utilized the powerful defense power and the power of the 152 mm howitzer. Take advantage of the lonely struggle. It stood in front of the German troops, which continued to make good progress, and became an important force until they were ready for a counterattack.

Model outline
KV-2 1/35 scale, plastic model assembly kit. ★ Overall length 204 mm, overall width 95 mm. Based on the actual vehicle coverage, the powerful figure that surprised the German army is modeled with a high sense of reality. ★ The huge turret realistically expresses the rough texture and welding pattern of the armor surface in detail. ★ Hatch of each part of the car body can be assembled by choosing opening and closing. ★ Tracks are connected to the straight part. The slack at the top is also finished naturally. ★ A full-body image of the commander standing outside the car and a half-body image of the occupant leaning out of the hatch are set. ★ Two types of markings are available.

Tamiya is proud to announce a new 1/10 R/C off-road buggy model based upon the brand new TD2 chassis.
The newly designed stylish body is produced by Kota Nezu who penned that of the recently released Super Avante.

About the model
• This is a 1/10 R/C assembly kit. Length: 387mm, width: 246mm. Wheelbase: 283mm.
• The distinctive polycarbonate body is designed by Japanese designer Kota Nezu of znug design.
• The new TD2 chassis based around the TD4 chassis employs an front inboard suspension layout which offers exceptionally slim, low-profile form. Also, its front suspension arms have a skid angle of 25 degrees for superlative ground-hugging and stable performance off-road, plus angled CVA oil dampers to allow smooth suspension movement.
• The chassis based on the one-piece monocoque frame uses the same ball differentials as the ones of the TD4 chassis, plus full ball bearings, and features a transverse battery pack positioned to the rear and a midship transverse motor with 3 gears connecting it to the drivetrain for optimum balance and improved performance.
• Ribbed front and rear square spike tires facilitate stability and great grip. The newly designed star dish design front wheels are attached by hex hubs.
• The 4-wheel double wishbone suspension system uses CVA oil dampers for superlative performance.
• Choose between high and low type wing stays to adjust the downforce depending on the road surface.
• Comes with a driver figure who gives your buggy a realistic look, and high-torque servo saver.

No time to paint? Want to start building the main kit as soon as you open it!? Look no further as this Limited-Edition version of the Super Avante includes a pre-painted body with a few special-colored parts!

This R/C model assembly kit creates the Super Avante, a 4WD off-road buggy that is bestowed with Tamiya’s legendary Avante name. It features an exceptionally low-profile design enabled in part by its front inboard suspension, with a shaft-driven 4WD drivetrain powered by a midship motor and employing front/rear ball differentials plus full ball bearings. Its futuristic body design is the work of Kota Nezu at Znug Design, and features numerous clear sections that just add to the Super Avante’s distinctly modern mood, as do the cockpit-rear buttress and the four mini fenders.

TD4 – Low Profile, High Performance
The TD4 is a shaft-driven 4WD buggy chassis which employs front inboard suspension for slim, low-profile form. It features a longitudinal battery pack position in the center and a midship transverse motor for optimum balance and improved performance. The drivetrain uses full bearings, and sealed front/rear gearboxes have built-in ball differentials. Two link rods and crank arm transmit movement of the left-side servo to the three-piece steering arm setup. 4-wheel independent double wishbone suspension utilizes CVA oil dampers. Turnbuckle shaft upper arms facilitate camber angle adjustment. Two types (high/low) of wing stays are included and star dish wheels are paired with square spike tires which offer superlative grip off-road.

• 1/10 R/C model assembly kit. Length: 387mm, width: 246mm. Wheelbase: 283mm.
• The polycarbonate body is pre-painted and pre-cut.
• The main chassis and damper springs come in yellow color to make this release unique to the designer.
• The TD4 is a shaft-driven 4WD buggy chassis which employs front inboard suspension. It features a longitudinal battery pack position in the center and a midship transverse motor for optimum balance and improved performance.
• The 4-wheel independent double wishbone suspension system uses CVA oil dampers.
• Features full ball bearings.
• Star dish wheels are paired with square spike tires.
• Choose between high and low type wing stays to adjust the downforce depending on the road surface.
• Comes with a driver figure (not pre-painted) for extra realism, and high-torque servo saver.
• Requires: 2-channel radio, low-profile servo, ESC, Motor, and 7.2-7.4volt battery with compatible charger.