De Havilland Mosquito FB Mk.VI

masterpiece versatile twin-engine machine mosquito British Air Force was called to active in all missions “wonders of the wooden machine”. Fighter-bomber type is its flagship type, FB Mk.VI (6) is appeared in 1/32 scale of force. Accurately model the elegant outline on the basis of thorough actual coverage. Wing adopted the actual similar structure to be joined to the body the robust main girder parts by connecting the left and right to the nucleus. Tire is full of attractions such as the tread pattern and its own weight deformation is realistic in the molding in the clever parts division. ★ 1/32 Air Craft Series No. 26
1/32 De Havilland Mosquito FB Mk.VI (sixty thousand three hundred and twenty-six)
★ full width 515mm. ★ cockpit interior and lower torso of the bomb bay also dense finish. ★ 7.7mm machine gun and 20mm cannon also precisely reproduce the nose. ★ 500ポンドbombs and crew of dolls three bodies, with marking three.
JulyRelease

1 included input number 3

Honda S600

Honda’s first was released a small sports car as a passenger car, it appeared in 1964 as a development type of S500, S600, which left a good results even at home and abroad of the race is appeared in 1/24 scale. Power bulge with no hood, a fine lattice-shaped front grille, reproduction captures the features of the S600, such as circular rear lamp. High-performance four-cylinder DOHC engine is also realistic, such as quadruple carburetor and equal-length exhaust manifold. Hood can be opened. ★ 1/24 Sports Car Series No.340
1/24 Honda S600 (24340)
★ total length 136mm. ★ ingenious rear around employing a chain drive also attention. ★ plated parts, such as bumpers and front grille. ★ can be assembled to choose the open state and the hardtop mounted state.
May 30 around released
May 26 shipping
included 1 incoming number 36
3,000 yen
(excluding tax)

Toyoda AA type

leave as Toyota’s first mass-produced passenger car, which was announced in 1936 its name in history, Toyoda AA type is revived in 1/24. Reproduce front grille and rounded, such as front and rear fenders to draw a smooth curve, the elegant appearance that was called streamlined to Real. Front and rear bumpers and front grille, wipers, etc. using the plated parts. Frame and engine bottom, suspension were also three-dimensional sense of well-modeled. ★ 1/24 Sports Car Series Nanba339
1/24 Toyoda MODEL AA (twenty-four thousand three hundred and thirty-nine)
★ total length 202mm. ★ Use the slide mark of plating tone to such hood and body side of the mall. ★ hood crest mark etched parts. ★ with driver doll tie wear.
June 27 around released
June 24 dispatch
1 included input number 24
3,400 yen
(excluding tax)

Team Lotus Type 49B 1968 (with etching parts)

sponsor color the 1968, which is also known as the first F1 of dressed champion machine, the team Lotus type 49B is the emergence and grade up the contents. Brake disks and radiator, metal air funnel in addition to etching parts for seat belt buckle will enhance the sense of precision. Also, it was masking stickers for coating divided, also Nozukauru for emblem sticker set. ★ 1/12 big scale series No.53
1/12 TEAM LOTUS TYPE 49B 1968 (w / PHOTO-Etched PARTS) (12053)
★ total length 360mm. ★ Reproduce the slim form in the real. ★ foot around operating in the vehicle similar mechanism. The front wheels and the steering is also linked. ★ DFV engine also precise finish. ★ with driver figure.
June 20 around released
June 17 dispatch
1 included input number 6
12,000 yen
(excluding tax)

Mesh pipe (outer diameter φ2.0mm / outer diameter φ2.6mm)

can be seen in such real car and motorcycle oil line and water hose, a pipe that has been coated with a metal mesh was realistic. Silver mesh surface is glossy, since the internal adopts a dual structure of plastic pipe, is useful for plugging in a pin part and brass line of parts. We’ve prepared two different sizes of outer diameter φ2.0mm and outer diameter 2.6mm. Both length of 1m. ★ detail up parts series Nanba62,63
BRAIDED HOSE 2.0 mm OUTER DIAMETER (12 662) /2.6Mm OUTER DIAMETER (12663)
★ ​​outer diameter φ2.0mm inside of plastic pipe of inner diameter is 0.8mm, it of φ2.6mm 1.2mm . ★ Ideal for detail up 1 / 12,1 / 24-scale car models and 1 / 6,1 / 12-scale model of the bike.
May 30 around released
May 26 dispatch
1 included input number of each 60
each 400 yen
(excluding tax)

3 t 4 × 2 cargo truck Germany

during the Second World War, was busily engaged in the transport of troops and supplies in all front, is ideal for collection 3 t 4 × 2 cargo truck that became a military track to represent the Germany 1/48 It appeared in scale. Modeled in the assembly easy to parts constitute a functional form of unique track. The set and drums and jerry cans that can be loaded on the loading platform as accessories. We are looking forward to the scene production in combination with the German army items. ★ 1/48 Military Miniature Series No.85
1/48 GERMAN 3 ton 4×2 CARGO TRUCK (32,585)
★ total length 127mm. ★ three-dimensional sense of sufficient suspension and cabin interior is also small parts of the ladder frame. ★ headlight You can choose whether or not the air defense cover. ★ doll one body of the driver, decals two kinds with.
June 27 around released
June 24 dispatch
1 included input number 36

WWI British infantry and small arms fire set

to set a wealth of small arms and equipment goods in doll 4 body of British infantry during the first World War. Modeled by instructing the attack officers, soldiers throw grenades, soldiers two bodies that set up the rifle is uplifting pause. Enfield rifles and Ross rifles, Lewis light machine gun, Webley pistol, in addition to small arms such as grenades, equipment is also abundantly available, such as binoculars. It will be combined with Mark IV tanks and WWI British Infantry set. ★ 1/35 Military Collection No.9
1/35 WWI BRITISH INFANTRY w / SMALL ARMS & EQUIPMENT (32409)
★ doll is reproduced in the first World War the second half of the style. ★ wire cutter, dixie, ammunition pouch, holster, even such as shovel ready. ★ you can widely used in detail up and scene production.
May 30 around released
May 26 shipping
included 1 incoming number 36
1,800 yen
(excluding tax)

German Heavy armored car Sd.Kfz.234 / 1 (2cm gun-mounted)

second World War the end, is 2cm gun-mounted 8 wheel load armored car Sd.Kfz.234 series that has been deployed in reconnaissance troops Sd.Kfz.234 / 1. Italeri excellent work kit appeared to renewal. Net part and anti-aircraft aiming ring of turrets, such as jerry cans fixed belt reproduced in etched parts. Well as equipment and jerry cans of the body various parts revamped to the new parts. The reliability of the assembly has been improved by adding also mounting guide and fit of parts. ★ Tamiya Italeri Series No.19
1/35 GERMAN HEAVY ARMORED CAR Sd.Kfz.234 / 1 (w / 2 cm GUN) (37019)
★ total length 185mm. ★ headlight and antenna base, jack well as new parts. ★ personal equipment the abundantly available. ★ crew 2 adults and messenger soldier doll total of three bodies in addition motorcycle also set. ★ decals two kinds with.
June 20 around released
June 17 dispatch
1 included input number 24
3,900 yen
(excluding tax)

Germany Panther D type Germany Panther D type

initial type of Panther tank that faces the first battle in the biggest tank battle “Battle of Kursk”, D type is added to finally 1 / 35MM series. The only existing the vehicle carefully and interviewed, and modeled a complete new design a fearless figure with a tilt armor and powerful long-barreled 7.5cm gun in the Netherlands. Three detail up parts that complement the pivotal points effectively also appeared at the same time. Please check the origin of the masterpiece tank means. ★ 1/35 Military Miniature Series Nanba345
1/35 GERMAN TANK PANTHER Ausf.D (35,345)
★ total length 254mm. ★ D-early also parts of smoke grenade launchers that can be seen in the. ★ track adopted a quick and realistic belt. ★ bust and the outside of the vehicle crew of doll one body of the commander, with decals three types of Kursk battle.
July 18 around released
July 15 shipping
included 1 incoming number 24

Germany Panther D type metal barrel set Germany Panther D-type metal-barrel set

more detail up parts that enhance the kit and the simultaneous release of the Panther D type of perfection. In addition to the gun barrel made ​​out sharpener real aluminum material, we have set a molded article of gun tail parts. Breech will effectively produce a model in a component configuration that advanced integrated. ★ Detail Up Parts Series No.64
1/35 GERMAN PANTHER Ausf.D METAL GUN BARREL SET (12664)
sharp finish of ★ barrel even processing of parting line unnecessary metal unique. ★ main gun loading section or a coaxial machine gun is also available.
July 18 around released
July 15 shipping
one number included input 60

Germany Panther D type articulated track set Germany Panther D type articulated track set

Panther D type dedicated prefabricated track set appeared. We have adopted a method for bonding the center guide to the body to pursue realism. After bonding can be easily connected in a snap fit. Reproduction in a state of hanging under its own weight and I can be done with ease. ★ Detail Up Parts Series No.65
1/35 GERMAN PANTHER Ausf.D SEPARATE TRACK LINK SET (12 665)
★ used in place of the kit comes with a belt-type track. ★ to reproduce the lighter hole drilled in the center guide. It will increase the model of perfection.
July 18 around released
July 15 shipping
included 1 incoming number 48

Germany Panther D type etching grill set Germany Panther D type etching grill set

is the Panther D type etching Parts that can reproduce the foreign matter intrusion prevention nets attached to the engine grill. By employing a soft material, real Similarly, possible to fit the grill. It is a delicate finish of metal unique. ★ Detail Up Parts Series No.66
1/35 GERMAN PANTHER Ausf.D PHOTO-Etched GRILLE SET (12666)
★ 2 sheets for round grill, and set the four sheets for square grill. ★ sharp texture will enhance the attractiveness of the Panther D type more.
July 18 around released
July 15 shipping
one number included input 60

Nippon Light Cruiser Mogami Nippon Light Cruiser best

light heavy because cruiser cruiser, and top with a ship calendar that eventful that change the appearance to the aviation cruiser, its light and cruiser specification will join the WL series. Such as the smooth lines and induction chimney from the bow toward the stern, modeled without leaving the smart appearance. Massive full hull in the left and right split type, broadside part also three-dimensional feeling enough. Distinctive rear mast and cranes, high-angle guns of the rear deck next departure bullets loaded exercise machine is also a realistic finish. ★ 1/700 Water Line Series Nanba359
1/700 JAPANESE LIGHT CRUISER Mogami (thirty-one thousand three hundred and fifty-nine)
★ total length 286.5mm. ★ main turret of 15.5cm3 twin assembled after pivotable. ★ HeiSo-rui and main mast, even such as bridge sharp finish. ★ 94 Equation No. 1 Water reconnaissance aircraft 1 aircraft and 95 Formula Water reconnaissance aircraft 2 aircraft is set.
July 18 around released
July 15 shipping
included 1 incoming number 36

US Navy aircraft carrier CV-3 Saratoga (Pontus model manufactured with detail up parts) US Navy aircraft carrier CV-3 Saratoga (with Pontus model manufactured by detail up parts)

World War II United States Navy aircraft carrier CV-3 Saratoga that fought until the end of the war from the time of the war. In addition to the detail-up parts to WL series of kit, we have further enhanced the spectacular of the figure that has been referred to as the “love of Sarah.” Anti-aircraft fire and the bridge of the radar, including four of the etched parts such as handrails, brass ground objects such as gun barrel and the mast of 5 inches gun, wooden deck sheet, and set the deck for dry decals. ★ scale limited
1/700 USNAVY AIRCRAFT CARRIER CV-3 SARATOGA (w / Pontos MODEL DETAIL UP PARTS) (25179)
★ total length 396mm. ★ by four etching parts made ​​up of delicate parts, precise sense of the entire hull is greatly improved. ★ all detail up parts Korean Pontus model manufactured.
July 18 around released
July 15 shipping
1 included input number 6

Scale model resale
1/12 Kawasaki Ninja ZX-14 Special Color Edition (14112) … May released 3,600 yen (Excluding tax)
1/12 Honda MVX250F (14023) … June release 2,800 yen (Excluding tax)
1/12 Yamaha YZR500 (OW70) Tadahiko Taira specification (14075) … June release 2,800 yen (Excluding tax)
1/24 Toyota Land Cruiser 80VX Limited (24 107) … June release 2,800 yen (Excluding tax)
1/24 Toyota Land Cruiser 80 Sports Option (24122) … July released 3,400 yen (Excluding tax)
1/12 Honda RA273 (with etching parts) (12032) … July released

Mercedes-Benz Unimog 425 (CC-01)

Unimog 425 that appeared in 1974 in the tones and straight style is applied to the electric RC car series. Such as embedded bumper square cabin and square light, distinctive and reproduce the figure in real polycarbonate. Snorkel duct and door mirror I was prepared in separate parts. CC-01 of the shaft 4WD not anywhere chassis running. It was fitted with a block tire of strong tread pattern. 1/10 RC Car Series Nanba609
1 / 10Rc MERCEDES-BENZ UNIMOG 425 (CC-01 CHASSIS) (fifty-eight thousand six hundred and nine)
★ total length 368mm. ★ light case and the Benz emblem plating parts of the front and rear. ★ front double wishbone, is equipped with CVA oil dampers around the rear 4-link rigid legs.
May 30 around released
May 27 dispatch
1 included input number 6
18,000 yen
(excluding tax)

Toyota FJ Cruiser (CR-01)

the popular SUV, it was a combination of CR-01 chassis that enjoy rock crawling in the Toyota FJ Cruiser. Ladder frame is brilliant raster silver finish. Before and after the Def can easily lock and unlock using the hex wrench. Suspension 4-link rigid. Activates the oil damper in the push rod and rocker arm, it demonstrates the tremendous stroke and high traction. ★ RC limited
1 / 10Rc Toyota FJ CRUISER (CR-01 CHASSIS) (84 411)
★ total length 476mm. ★ the wheel of adopting the bead lock ring of plating finish, and fitted with Cliff crawler tire. ★ The light case it is possible LED mounting of Light (5φmm) (sold separately).
May 30 around released
May 27 dispatch
1 included input number 2
39,800 yen
(excluding tax)

TB-04 R chassis kit

drive-efficient shaft 4WD, it is the chassis kit with enhanced further the combat power of the TB-04. Up the rigidity of the major resin parts as made ​​of reinforced resin of carbon fiber blend. TRF419 the same shape of the front and rear suspension arms and upright, is around the foot using the aluminum suspension mounts and mounting the TRF big bore damper. The aluminum steering bridge and wiper I creating a direct operability. ★ RC limited
1 / 10Rc TB-04R CHASSIS KIT (eighty-four thousand four hundred and twelve)
★ drive system front-direct, the configuration of the rear Giyadefu. ★ lightweight aluminum propeller shaft, pilot shaft, was to reduce the loss by adopting the mission shaft.
May 23 around released
May 20 dispatch
1 included input number 4
49,800 yen
(excluding tax)

RC Buggy Kumamonbajon (DT-02)

popular bear RC car 2nd buggy style topped Mon driver. I put the doll of “Kumamon” to the two-wheel drive buggy you do not choose a place to run from on-road to off-road. Rode in the driver’s seat and hold the handle doll of “Kumamon” is set in the pre-painted completed state. 380 types of motors tractable power characteristics which is mounted on the vehicle body rear portion. Body impact styrene resin that can be painted. ★ 1/10 electric RC Car Series Nanba615
1 / 10Rc RC BUGGY Kumamon Version (DT-02 CHASSIS) (fifty-eight thousand six hundred fifteen)
★ total length 390mm. ★ Kumamon and tomatoes, such as watermelon illustrations, liven up the fun stickers also rich set. ★ You can also enjoy the built in performance up the optional parts sold separately.
June 20 around released
June 17 dispatch
1 included input number 6
9,800 yen
(excluding tax)

TRF211XM chassis kit

is 2WD pure racing buggy for the top drivers. High-strength, adopting a lightweight resin Rowadekki that were molded excellent material with high impact resistance in a special recipe. Rigidity and bending, to balance the stickiness at a high level, and demonstrate a stable running on any road surface. In addition, the rigidity of the rear by combining Riyasutefuna and battery Steph toner. Equipped with a big bore aeration damper around the foot. ★ TRF Series No.188
1 / 10Rc TRF211XM CHASSIS KIT (forty-two thousand two hundred eighty-eight)
★ aluminum gear box. To prepare a ball differential and Giyadefu. ★ low profile servo is used, straight pack battery also can be mounted. ★ polycarbonate lightweight body and with the rear wing.
June 20 around released
June 17 dispatch
1 included input number 2
66,800 yen
(excluding tax)

Suzuki Jimny (JB23) (MF-01X)

is a Brand New models of compact M chassis size that adopts the shaft drive 4WD appeared. The main frame is divided into three parts monocoque, which is integrated to the gear box. Is placed next to the battery in the center of the vehicle body, it is equipped with a motor in the rear end. Double wishbone independent suspension, and fitted with a rally block tires for touring car. Body was chose Suzuki Jimny (JB23 type). ★ 1/10 electric RC Car Series Nanba614
1 / 10Rc SUZUKI JIMNY (JB23) (MF-01X CHASSIS) (58614)
★ total length 347mm. ★ shaft 4WD chassis that ran enjoy it anywhere. ★ replace the central block of the frame, by combining the propeller shaft optional, three wheelbase are selectable.
June 27 around released
June 24 dispatch
1 included input number 6
13,800 yen
(excluding tax)

Porsche 911 GT2 racing (TA02SW)

commercially available racing machine that was active in the world of racing, Porsche 911 GT2 appeared in the RC. Reproduce the glamorous form equipped with over fender to Real in polycarbonate. High-mount type of large rear wing and engine hood, door mirror was prepared in separate parts. Chassis TA02SW of the shaft drive 4WD. A wheelbase shorter (236mm) is a wide tread specification set ★ RC limited
1 / 10Rc PORSCHE 911 GT2 RACING (TA02SW CHASSIS) (84399)
★ total length 442mm. ★ in two different piece of mesh wheel width before and after, and fitted with slick tires. A built-in differential gear before and after the sealed gear case ★, rear has adopted a ball differential.
June 27 around released
June 24 dispatch
1 included input number 6
17,800 yen
(excluding tax)

TRF102 chassis kit

is 2WD Formula chassis to fight the high-end race. Is equipped with a roll point ball and pitching shaft, it is adopted T bar type rear suspension that the roll and pitch can be completely independently control each. It will deliver outstanding following property to a road surface. Furthermore, the floating mounting of the traction battery. Rowadekki of bending the taking advantage to the maximum and produces handling a sense of stability. ★ TRF Series No.189
1 / 10Rc TRF102 CHASSIS KIT (42289)
★ front suspension is independent left and right of the kingpin coil spring. ★ steering servo uses a carbon-made bridge and aluminum servo mount, and then securely fixed by screws.
June 27 around released
June 24 dispatch
1 included input number 4
38,800 yen
(excluding tax)

TT-02D TYPE-S drift spec chassis kit TT-02D TYPE-S drift spec chassis kit

based on the TT-02 TYPE-S, we were subjected to the tuning for the thrilling drift. Black color to fearless 5-spoke wheel, set the plastic drift dedicated tire of 24mm width. Around the foot which adopted the reversible suspension arm, using the turnbuckle shaft to the upper arm. 3mm thickness to set the CVA oil damper on FRP damper stay, and fitted with a soft type of spring. ★ RC Special
1 / 10Rc TT-02D TYPE-S DRIFT SPEC CHASSIS KIT (47,301)
★ reduce the drive loss with aluminum propeller shaft and aluminum propeller joint. ★ aluminum motor heat sink is also equipped with the torque-Tuned Motor. ★ drive system full bearing specifications.
JulyRelease

1 included input number 4

NISSAN GT-R LM NISMO LAUNCH VERSION (F103GT) NISSAN GT-R LM NISMO LAUNCH VERSION (F103GT)

this year, innovative machine NISSAN GT-R LM NISMO of NISSAN to return to Le Mans 24-hour race first time in 16 years. The launch version (development vehicle) is appeared in the early as RC car. Low elongated body, ultra-long nose, raised front and rear fenders, and reproduce the distinctive appearance, such as shark fin to feel plenty of polycarbonate. Chassis has adopted the F103GT of direct drive 2WD. ★ 1/10 electric RC Car Series Nanba617
1 / 10Rc NISSAN GT-R LM NISMO LAUNCH VERSION (F103GT CHASSIS) (58617)
★ total length 426mm. ★ foot around the left and right independent front has used the link type suspension arm, rigid type rear is using the FRP T bar. ★ is equipped with a hollow rubber super slick tire.
JulyRelease

1 included input number 4

TT-02B MS TT-02B MS

is MS specification that enhances the driving performance of the popular TT-02B chassis as shaft drive 4WD buggy. Aluminum propeller shaft and propeller joint, in addition to the equipment of the metal drive shaft, to improve the driving efficiency as a full bearing specifications. Suspension equipped with FRP made ​​damper stay and the adjuster rod. Such as straight-line stability and cornering characteristics to the superior aluminum rear upright was also set. ★ RC limited
1 / 10Rc TT-02B MS (eighty-four thousand four hundred eighteen)
★ total length 380mm. ★ futuristic form is body and with the rear wing of the charm of dual ridge. ★ an image of TRF machine, we’ve set a special sticker that finished in MS color.
JulyRelease

1 included input number 4

Preassembled New entry RC car running in batteries (name TBD) Preassembled New entry RC Car (name TBD) running on batteries

was four AA batteries to power source, all-in-one of the completed RC buggy is the new appearance. Brand New chassis buggy type of rear-wheel drive. 4-wheel strut suspension is a simple structure. The rear end it was equipped with a 370 type motor of easy to control characteristics. ESC and also unit with integrated receiver of 2.4GHz specification newly developed, can accommodate from 4.8V to 7.2V.

★ completed RC car of a full-length 282mm. The transmitter wheel type. ★ familiar Nezu Kota Mr. responsible for the design of polycarbonate body mini four-wheel drive. ★ steering servo using a 1/10 size.
JulyRelease

1 included input number 2

XB Volkswagen Scirocco GT (TT-01D TYPE-E) drift spec

appeared in Volkswagen’s three-door hatchback coupe, the machine that reproduces the racing type of sirocco XB. Reproduce the dauntless form of wide and low to the real in polycarbonate. Chassis adopts the TT-01D TYPE-E of the shaft 4WD. Tuning for drift is decorated, equipped with RS-540 Sport Tuned Motor, it is fitted with a plastic tire of 24mm width. You can enjoy a thrilling drift. ★ 1 / 10RC Expert Built Series No.183
1 / 10Rc XB VOLKSWAGEN SCIROCCO GT (TT-01D TYPE-E CHASSIS) DRIFT SPEC (fifty-seven thousand eight hundred eighty-three)
★ total length 443mm. ★ without the need for band adjustment, adopting the 2.4G propoxycarbonyl to enjoy feel free to travel at more than one. ★ wheel trigger type of transmitter, the traction battery, and I was set charger.
May 30 around released
May 27 dispatch
1 included input number 2
26,800 yen
(excluding tax)

XB RC Buggy Kumamonbajon (DT-02) XB RC Buggy Kumamonbajon (DT-02)

This is a complete electric radio control car that was carrying a doll of “Kumamon” from on-road to the two-wheel drive buggy you do not choose a place to run to off-road. Doll was riding in the driver’s seat and hold the handle “Kumamon” was set in the pre-painted completed state. Because it is two-wheel drive buggy lightly simple structure, you can enjoy peppy ride. In addition, performance-up is also possible incorporate the optional parts sold separately. ★ 1 / 10RC Expert Built Series Nanba184 ~ 187
1 / 10Rc XB RC BUGGY Kumamon Version (DT-02 CHASSIS) (57884 ~ 57887)
★ total length 390mm. ★ red, black, green, and providing a body color of the four colors of yellow. ★ RC mechanism adopted 2.4GHz. ★ wheel type of transmitter adopted the grip cover and trigger cover.
JulyReleased

yen each 22,800
(excluding tax)

Raikiri GT (TG10-Mk.2 FZ) Raikiri GT (TG10-Mk.2 FZ)

and a top speed of growth, exhaust sound that plays a high tone is to TG10-Mk.2FZ chassis of charm, has combined the body of the original design. Body that combines the styling and aerodynamic effects, which become familiar Nezu Kota’s hand in the four wheel drive mini. The overall form that stance low to wide, sharp headlights create a fearless look, is before and after the fender features protruding. ★ 1/10 engine RC Car Series No.52
1 / 10Rc raikiri GT (TG10-Mk.2 FZ CHASSIS) (44,052)
★ total length 430mm. ★ duralumin Roi, with a Tamiya FS-12FZ engine and two-speed mission of the amount of exhaust 2.1cc a double deck frame of the resin upper to adopt the shaft 4WD chassis.
JuneRelease

1 included input number 2

Hop up Opushonzu
OP.1632 TT-02 TYPE-S carbon damper stay (front) … May released 1,500 yen (Excluding tax)
OP.1633 TT-02 TYPE-S carbon damper stay (rear) … May released 1,600 yen (Excluding tax)
OP.1634 TT-02 TYPE-S steel suspension mount set … May released 3,300 yen (Excluding tax)
OP.1635 aluminum camber gauge (stick-type) … May released 2,100 yen (Excluding tax)
OP.1636 TT-02 TYPE-S steel suspension mount (front) … June release 1,200 yen (Excluding tax)
OP.1637 TT-02 TYPE-S steel suspension mount (rear) … June release 1,200 yen (Excluding tax)
OP.1638 TT-02 TYPE-S Steel rebound stopper (two) … June release 1,300 yen (Excluding tax)
OP.1643 MF-01X full bearing set … June release 3,000 yen (Excluding tax)
OP.1644 GF-01 aluminum down mount servo guard … June release 1,800 yen (Excluding tax)

RC limited parts
TB-04 R titanium screw set … May released 6,600 yen (Excluding tax)
M-05 Blue carbon damper stay (front) … May released 1,100 yen (Excluding tax)
M-05 Blue carbon damper stay (rear) … May released 1,400 yen (Excluding tax)
TRF102 titanium screw set … June release 3,900 yen (Excluding tax)

TRF Series parts and equipment
Aluminum parts tray … May released 2,800 yen (Excluding tax)
TRF419 aluminum Lower deck (2.0mm thick) … July released 7,800 yen (Excluding tax)

Body parts for engines Car
SP.1578 Raikiri GT (wide) Spare Body Set … July released

Hop up Opushonzu (for engine car)
OP.1641 option wing set for engine car body … July released

R/C Models
42289　　1/10 R/C TRF102 Chassis Kit
84399　　1/10 R/C Porsche 911 GT2 Racing (TA02SW)
42288　　1/10 R/C TRF211XM Chassis Kit
58614　　1/10 R/C Suzuki Jimny (JB23) (MF-01X)
58615　　1/10 R/C Buggy Kumamon Version (DT-02)
44052　　1/10 Glow-Engine R/C Raikiri GT (TG10-Mk.2FZ)
42297　　Hard Stabilizer Set (DB01, DB02)
54636　　TT-02 Type-S Steel Suspension Mount (Front)
54637　　TT-02 Type-S Steel Suspension Mount (Rear)
54638　　TT-02 Type-S Steel Rebound Stopper (2pcs.)
54643　　MF-01X Ball Bearing Set
54644　　GF-01 Aluminum Servo Lowering Guard
54654　　MF-01X S Wheelbase Propeller Shaft
54655　　MF-01X L Wheelbase Propeller Shaft
84417　　TRF102 Titanium Screw Set

Scale Models
37019　　1/35 German Heavy Armored Car Sd.Kfz. 234/1 (w/2cm Gun)
32585　　1/35 German 3ton 4×2 Cargo Truck
24339　　1/24 Toyoda Model AA
12053　　1/12 Team Lotus Type 49B 1968 (w/Photo-Etched Parts)
14023　　1/12 Honda MVX250F
14075　　1/12 Yamaha YZR500 (OW70) Taira Version
24107　　1/24 Toyota Land Cruiser 80 VX Limited
35126　　1/35 M247 Sgt York U.S. Air Defense Gun System

Kids
15484　　Torque-Tuned 2 Motor
15485　　Rev-Tuned 2 Motor
15486　　Atomic-Tuned 2 Motor
15487　　Torque-Tuned 2 Motor PRO
15488　　Rev-Tuned 2 Motor PRO
15489　　Atomic-Tuned 2 Motor PRO
15490　　Side Mass Damper Set (for MA Chassis)

Tools & Paints
74123　　Sharp Pointed Side Cutter for Plastic (Slim Jaw)

– Machine, parts case, large transporter of convenient large capacity to carry in your houses and tools

– Optimal transporter at the time of participation of the four wheel drive mini race is appeared.
– Interior divided into two upper and lower stages are possible storage of a large capacity.
– Four wheel drive mini multi-case and mini four wheel drive parts case set in the upper part, a tool, such as a low height machine, lower the machine and four wheel drive mini catcher, such as a mini four wheel drive check box can be stored.
– In addition, the back side of the upper lid can be used as a pit table, it will come in handy in the tournament venue.
– Upper and lower is simple lock by causing the handle to prevent jumping out of the storage product by tightening forgetting to buckle.
– Four wheel drive mini logo and carved full of a sense of official.

– Size 434 × 233 × 271mm
– Body buckle Handle cover material: impact-resistant copolymers

Full length: approx 286.5mm.

– The light cruiser, heavy cruiser, was transition to the aviation cruiser the origin `light cruiser` specification [top] 1/700 WL series first model!

– From light cruiser heavy cruiser, and top with a ship calendar that eventful that change the appearance to the aviation cruiser.
– Initial light and cruiser specification adds to finally WL series.
– Such as the smooth lines and induction chimney from the bow toward the stern, modeled without leaving the smart appearance.
– Massive full hull in the left and right split type, broadside part also three-dimensional feeling enough.
– Distinctive rear mast and cranes, high-angle guns of the rear deck next departure bullets loaded exercise machine is also a realistic finish.

– Main turret of 15.5cm3 twin assembled after pivotable.
– HeiSo-rui and main mast, even such as bridge sharp finish.
– 94 Equation No. 1 Water reconnaissance aircraft 1 aircraft and 95 Formula Water reconnaissance aircraft 2 aircraft is set.

Appearance was decorated with popular TRF color in the race scene “TT-02B MS” is!　It was fitted with a CAV oil damper on bathtub type of main frame, four-wheel double wishbone suspension of the long arm specification. In assembling the popular TT-02B chassis also as an entry 4WD buggy model with ease and high driving performance, it is a special model with standard equipment optional parts that are stable driving performance. The body is allowed to cockpit forward, the futuristic form of dual edge that has been configured with a smooth surface, we have set the TRF sticker that reproduces the MS color (Tamiya Racing Factory) machine. The underlying full-bearing specification of driving performance up. The propeller shaft and propeller joints that transmit the motor power can be made ​​of aluminum, to improve the driving efficiency to minimize blurring of the shaft. Furthermore equipment completion such as aluminum rear upright to improve the stability of the front and rear FRP damper stays and cornering to expand the width of the setting is packed. It is recommended model that becomes the immediate use of the race.

The main parts accompanying
OP.497 TT-02B / TT-01 full bearing set
OP.1501 TT-02 aluminum propeller shaft
OP.1502 TT-02 aluminum propeller joint
OP.1556 TT-02B FRP front damper bracket set
OP.1557 TT-02B FRP rear damper bracket set
OP.1555 TT-02 FRP battery plate and transponder bracket set
OP.793 DF-02 Aluminum 2-way rear upright