De Havilland Mosquito FB Mk.VI

masterpiece versatile twin-engine machine mosquito British Air Force was called to active in all missions “wonders of the wooden machine”. Fighter-bomber type is its flagship type, FB Mk.VI (6) is appeared in 1/32 scale of force. Accurately model the elegant outline on the basis of thorough actual coverage. Wing adopted the actual similar structure to be joined to the body the robust main girder parts by connecting the left and right to the nucleus. Tire is full of attractions such as the tread pattern and its own weight deformation is realistic in the molding in the clever parts division. ★ 1/32 Air Craft Series No. 26
1/32 De Havilland Mosquito FB Mk.VI (sixty thousand three hundred and twenty-six)
★ full width 515mm. ★ cockpit interior and lower torso of the bomb bay also dense finish. ★ 7.7mm machine gun and 20mm cannon also precisely reproduce the nose. ★ 500ポンドbombs and crew of dolls three bodies, with marking three.
JulyRelease

1 included input number 3

Honda S600

Honda’s first was released a small sports car as a passenger car, it appeared in 1964 as a development type of S500, S600, which left a good results even at home and abroad of the race is appeared in 1/24 scale. Power bulge with no hood, a fine lattice-shaped front grille, reproduction captures the features of the S600, such as circular rear lamp. High-performance four-cylinder DOHC engine is also realistic, such as quadruple carburetor and equal-length exhaust manifold. Hood can be opened. ★ 1/24 Sports Car Series No.340
1/24 Honda S600 (24340)
★ total length 136mm. ★ ingenious rear around employing a chain drive also attention. ★ plated parts, such as bumpers and front grille. ★ can be assembled to choose the open state and the hardtop mounted state.
May 30 around released
May 26 shipping
included 1 incoming number 36
3,000 yen
(excluding tax)

Toyoda AA type

leave as Toyota’s first mass-produced passenger car, which was announced in 1936 its name in history, Toyoda AA type is revived in 1/24. Reproduce front grille and rounded, such as front and rear fenders to draw a smooth curve, the elegant appearance that was called streamlined to Real. Front and rear bumpers and front grille, wipers, etc. using the plated parts. Frame and engine bottom, suspension were also three-dimensional sense of well-modeled. ★ 1/24 Sports Car Series Nanba339
1/24 Toyoda MODEL AA (twenty-four thousand three hundred and thirty-nine)
★ total length 202mm. ★ Use the slide mark of plating tone to such hood and body side of the mall. ★ hood crest mark etched parts. ★ with driver doll tie wear.
June 27 around released
June 24 dispatch
1 included input number 24
3,400 yen
(excluding tax)

Team Lotus Type 49B 1968 (with etching parts)

sponsor color the 1968, which is also known as the first F1 of dressed champion machine, the team Lotus type 49B is the emergence and grade up the contents. Brake disks and radiator, metal air funnel in addition to etching parts for seat belt buckle will enhance the sense of precision. Also, it was masking stickers for coating divided, also Nozukauru for emblem sticker set. ★ 1/12 big scale series No.53
1/12 TEAM LOTUS TYPE 49B 1968 (w / PHOTO-Etched PARTS) (12053)
★ total length 360mm. ★ Reproduce the slim form in the real. ★ foot around operating in the vehicle similar mechanism. The front wheels and the steering is also linked. ★ DFV engine also precise finish. ★ with driver figure.
June 20 around released
June 17 dispatch
1 included input number 6
12,000 yen
(excluding tax)

Mesh pipe (outer diameter φ2.0mm / outer diameter φ2.6mm)

can be seen in such real car and motorcycle oil line and water hose, a pipe that has been coated with a metal mesh was realistic. Silver mesh surface is glossy, since the internal adopts a dual structure of plastic pipe, is useful for plugging in a pin part and brass line of parts. We’ve prepared two different sizes of outer diameter φ2.0mm and outer diameter 2.6mm. Both length of 1m. ★ detail up parts series Nanba62,63
BRAIDED HOSE 2.0 mm OUTER DIAMETER (12 662) /2.6Mm OUTER DIAMETER (12663)
★ ​​outer diameter φ2.0mm inside of plastic pipe of inner diameter is 0.8mm, it of φ2.6mm 1.2mm . ★ Ideal for detail up 1 / 12,1 / 24-scale car models and 1 / 6,1 / 12-scale model of the bike.
May 30 around released
May 26 dispatch
1 included input number of each 60
each 400 yen
(excluding tax)

3 t 4 × 2 cargo truck Germany

during the Second World War, was busily engaged in the transport of troops and supplies in all front, is ideal for collection 3 t 4 × 2 cargo truck that became a military track to represent the Germany 1/48 It appeared in scale. Modeled in the assembly easy to parts constitute a functional form of unique track. The set and drums and jerry cans that can be loaded on the loading platform as accessories. We are looking forward to the scene production in combination with the German army items. ★ 1/48 Military Miniature Series No.85
1/48 GERMAN 3 ton 4×2 CARGO TRUCK (32,585)
★ total length 127mm. ★ three-dimensional sense of sufficient suspension and cabin interior is also small parts of the ladder frame. ★ headlight You can choose whether or not the air defense cover. ★ doll one body of the driver, decals two kinds with.
June 27 around released
June 24 dispatch
1 included input number 36

WWI British infantry and small arms fire set

to set a wealth of small arms and equipment goods in doll 4 body of British infantry during the first World War. Modeled by instructing the attack officers, soldiers throw grenades, soldiers two bodies that set up the rifle is uplifting pause. Enfield rifles and Ross rifles, Lewis light machine gun, Webley pistol, in addition to small arms such as grenades, equipment is also abundantly available, such as binoculars. It will be combined with Mark IV tanks and WWI British Infantry set. ★ 1/35 Military Collection No.9
1/35 WWI BRITISH INFANTRY w / SMALL ARMS & EQUIPMENT (32409)
★ doll is reproduced in the first World War the second half of the style. ★ wire cutter, dixie, ammunition pouch, holster, even such as shovel ready. ★ you can widely used in detail up and scene production.
May 30 around released
May 26 shipping
included 1 incoming number 36
1,800 yen
(excluding tax)

German Heavy armored car Sd.Kfz.234 / 1 (2cm gun-mounted)

second World War the end, is 2cm gun-mounted 8 wheel load armored car Sd.Kfz.234 series that has been deployed in reconnaissance troops Sd.Kfz.234 / 1. Italeri excellent work kit appeared to renewal. Net part and anti-aircraft aiming ring of turrets, such as jerry cans fixed belt reproduced in etched parts. Well as equipment and jerry cans of the body various parts revamped to the new parts. The reliability of the assembly has been improved by adding also mounting guide and fit of parts. ★ Tamiya Italeri Series No.19
1/35 GERMAN HEAVY ARMORED CAR Sd.Kfz.234 / 1 (w / 2 cm GUN) (37019)
★ total length 185mm. ★ headlight and antenna base, jack well as new parts. ★ personal equipment the abundantly available. ★ crew 2 adults and messenger soldier doll total of three bodies in addition motorcycle also set. ★ decals two kinds with.
June 20 around released
June 17 dispatch
1 included input number 24
3,900 yen
(excluding tax)

Germany Panther D type Germany Panther D type

initial type of Panther tank that faces the first battle in the biggest tank battle “Battle of Kursk”, D type is added to finally 1 / 35MM series. The only existing the vehicle carefully and interviewed, and modeled a complete new design a fearless figure with a tilt armor and powerful long-barreled 7.5cm gun in the Netherlands. Three detail up parts that complement the pivotal points effectively also appeared at the same time. Please check the origin of the masterpiece tank means. ★ 1/35 Military Miniature Series Nanba345
1/35 GERMAN TANK PANTHER Ausf.D (35,345)
★ total length 254mm. ★ D-early also parts of smoke grenade launchers that can be seen in the. ★ track adopted a quick and realistic belt. ★ bust and the outside of the vehicle crew of doll one body of the commander, with decals three types of Kursk battle.
July 18 around released
July 15 shipping
included 1 incoming number 24

Germany Panther D type metal barrel set Germany Panther D-type metal-barrel set

more detail up parts that enhance the kit and the simultaneous release of the Panther D type of perfection. In addition to the gun barrel made ​​out sharpener real aluminum material, we have set a molded article of gun tail parts. Breech will effectively produce a model in a component configuration that advanced integrated. ★ Detail Up Parts Series No.64
1/35 GERMAN PANTHER Ausf.D METAL GUN BARREL SET (12664)
sharp finish of ★ barrel even processing of parting line unnecessary metal unique. ★ main gun loading section or a coaxial machine gun is also available.
July 18 around released
July 15 shipping
one number included input 60

Germany Panther D type articulated track set Germany Panther D type articulated track set

Panther D type dedicated prefabricated track set appeared. We have adopted a method for bonding the center guide to the body to pursue realism. After bonding can be easily connected in a snap fit. Reproduction in a state of hanging under its own weight and I can be done with ease. ★ Detail Up Parts Series No.65
1/35 GERMAN PANTHER Ausf.D SEPARATE TRACK LINK SET (12 665)
★ used in place of the kit comes with a belt-type track. ★ to reproduce the lighter hole drilled in the center guide. It will increase the model of perfection.
July 18 around released
July 15 shipping
included 1 incoming number 48

Germany Panther D type etching grill set Germany Panther D type etching grill set

is the Panther D type etching Parts that can reproduce the foreign matter intrusion prevention nets attached to the engine grill. By employing a soft material, real Similarly, possible to fit the grill. It is a delicate finish of metal unique. ★ Detail Up Parts Series No.66
1/35 GERMAN PANTHER Ausf.D PHOTO-Etched GRILLE SET (12666)
★ 2 sheets for round grill, and set the four sheets for square grill. ★ sharp texture will enhance the attractiveness of the Panther D type more.
July 18 around released
July 15 shipping
one number included input 60

Nippon Light Cruiser Mogami Nippon Light Cruiser best

light heavy because cruiser cruiser, and top with a ship calendar that eventful that change the appearance to the aviation cruiser, its light and cruiser specification will join the WL series. Such as the smooth lines and induction chimney from the bow toward the stern, modeled without leaving the smart appearance. Massive full hull in the left and right split type, broadside part also three-dimensional feeling enough. Distinctive rear mast and cranes, high-angle guns of the rear deck next departure bullets loaded exercise machine is also a realistic finish. ★ 1/700 Water Line Series Nanba359
1/700 JAPANESE LIGHT CRUISER Mogami (thirty-one thousand three hundred and fifty-nine)
★ total length 286.5mm. ★ main turret of 15.5cm3 twin assembled after pivotable. ★ HeiSo-rui and main mast, even such as bridge sharp finish. ★ 94 Equation No. 1 Water reconnaissance aircraft 1 aircraft and 95 Formula Water reconnaissance aircraft 2 aircraft is set.
July 18 around released
July 15 shipping
included 1 incoming number 36

US Navy aircraft carrier CV-3 Saratoga (Pontus model manufactured with detail up parts) US Navy aircraft carrier CV-3 Saratoga (with Pontus model manufactured by detail up parts)

World War II United States Navy aircraft carrier CV-3 Saratoga that fought until the end of the war from the time of the war. In addition to the detail-up parts to WL series of kit, we have further enhanced the spectacular of the figure that has been referred to as the “love of Sarah.” Anti-aircraft fire and the bridge of the radar, including four of the etched parts such as handrails, brass ground objects such as gun barrel and the mast of 5 inches gun, wooden deck sheet, and set the deck for dry decals. ★ scale limited
1/700 USNAVY AIRCRAFT CARRIER CV-3 SARATOGA (w / Pontos MODEL DETAIL UP PARTS) (25179)
★ total length 396mm. ★ by four etching parts made ​​up of delicate parts, precise sense of the entire hull is greatly improved. ★ all detail up parts Korean Pontus model manufactured.
July 18 around released
July 15 shipping
1 included input number 6

Scale model resale
1/12 Kawasaki Ninja ZX-14 Special Color Edition (14112) … May released 3,600 yen (Excluding tax)
1/12 Honda MVX250F (14023) … June release 2,800 yen (Excluding tax)
1/12 Yamaha YZR500 (OW70) Tadahiko Taira specification (14075) … June release 2,800 yen (Excluding tax)
1/24 Toyota Land Cruiser 80VX Limited (24 107) … June release 2,800 yen (Excluding tax)
1/24 Toyota Land Cruiser 80 Sports Option (24122) … July released 3,400 yen (Excluding tax)
1/12 Honda RA273 (with etching parts) (12032) … July released