Precision drill bit 0.6mm (shaft diameter 1.0mm)
precision drill bit 0.7mm (shaft diameter 1.0mm) with a sharp edge and high rigidity, will add 0.6mm and 0.7mm in handy precision drill bit to the exact drilling. Ideal for precise shallow hole machining of plastic model. Root securely attached to a thicker pin vise than the drill part, runout difficult for the feature.
★ Craft tool series Nanba127,128 FINE PIVOT DRILL BIT 0.6Mm (SHANK DIA. 1.0Mm) (74127), FINE PIVOT DRILL BIT 0.7Mm (SHANK DIA. 1.0Mm) (74128) ★ sharp blade attached to a high-speed steel processing alms, excellent sharpness and durability. ★ it was to print the drill diameter to the shaft portion.
November 12, around released
November 9 shipping 360 yen (excluding tax)

Spray-Work Power Compressor
Spray-Work power compressor is stable blown compressor that allows the paint at a higher pressure. Polish painting of car models and motorcycle models from a wide big scale model of the painting area will be finished beautifully. It can be freely set by the pressure meter with air regulator with a drainage function. In addition, the compressor was also equipped with a hanger switch which is turned on only when you remove the air brush.
★ Tamiya air brush system Nanba53 SPRAY-WORK POWER AIR COMPRESSOR (74553) ★ maximum air pressure 0.4MPa, air discharge rate per minute 9-12 liters. ★ such as fine camouflage paint, also supports blown fine dropped the air pressure. ★ power a household outlet (AC100V, 50 / 60Hz).
October 29, around released
October 26, 34,800 yen (excluding tax)

Anti-vibration mat for compressor
Anti-vibration mat for the compressor is a rubber sponge mat to suppress the vibration laid under the compressor. There is a 10mm and a sufficient thickness, firmly absorbs the vibration of a large compressor. Since you are using the material of hardening, it is also characterized by the compressor is less likely to become unstable.
★ Tamiya air brush system Nanba54 AIR COMPRESSOR ANTI-VIBRATION MAT (74554) ★ size is the perfect size about 155 × 225 × 10mm, to power the compressor. ★ color is black.
October 29, around released
October 26, shipping 580 yen (excluding tax)

Paint Remover (250ml)
Paint Remover (250ml) acrylic, is solvent washable enamel, lacquer, each paint of polycarbonate. Less likely to damage the surface of the resin, nor does it detract from the clarity of the polycarbonate body. You can also peel off the plating if Tsukekome plating parts for about 1 hour.★ make-up material series Nanba183 PAINT REMOVER (87183) ★ also characterized by less odor in the water-soluble type. ★ You can use repeatedly for about two to three times. ★ it can not be used in ABS resin.
November 12, around released
November 9 shipping 960 yen (tax not included)

God Burning Sun (MA chassis)
God Burning Sun (MA chassis) is Shogakukan “Colo Aniki” in Tankuro new machine to show active in the four wheel drive mini cartoon Hiroyuki Takei teacher in the series “Hyper Dash! Yonkuro”. While leaving the powerful image of the primary burning sun, a characteristic wing was straight before the slope of the two big nose and rear extending to. It was fitted with a large diameter slick of black in the large-diameter 4-spoke wheels of white.
★ Mini 4WD PRO series Nanba44 GOD BURNING SUN (MA CHASSIS) (18644) ★ MA chassis body is gray color of midship motor in pursuit of driving efficiency. ★ A part of the low friction resin (POM) made of yellow. ★ gear ratio is 4: 1. ★ with a double shaft motor.
October 15, around released
October 12 shipping 1,000 yen (excluding tax)

Dash CB1 · earth emperor (Geo Emperor) Premium (Super II chassis)
Dash CB1 · earth emperor (Geo Emperor) Premium (Super II chassis) four wheel drive mini cartoon hero who appeared in “true Dash! Yonkuro” Hinomaru four wheel drive Ichiro of the machine, is a premium version of Geo Emperor. Dedicated sticker of metallic, etc. red & orange line to tighten the white body. Super II of popular chassis in the race. Chassis body is made of dark green ABS, rear roller stay and one lock gear cover is made of a light gun metal ABS.
★ four wheel drive mini special planning DASH-CB1 GEO-EMPEROR PREMIUM ( SUPER-II CHASSIS) (95277) has been equipped with a slick tire to ★ large-diameter six Supokuhoi Le of yellow. ★ bumper and rear stay is for a wide range of settings to prepare a plurality of parts mounting holes. ★ gear ratio is 4.2: 1.
October 29, around released
October 26, shipping 1,000 yen (excluding tax)

Shadow Shark Red Metallic (with carbon reinforced wheel)
Shadow Shark Red Metallic (with carbon reinforced wheel) is a special specification which has been subjected to matte red plated shadow shark of the body. AR chassis is black color of high-strength monocoque structure. Low friction resin under panel and diffuser, A component such as a rear skid bar was also a black color. Furthermore, in addition to the silver-plated wheels of 5-spoke, was plus a carbon-reinforced wheel of the same design (black).
★ four wheel drive mini special planning SHADOW SHARK RED METALLIC (W / CARBON REINFORCED WHEELS) (95290) ★ with metal tone sticker shine in red metallic body. ★ standard equipped with a double roller to rear stay. All six of the roller is low friction type. ★ 3.5: 1 ultra-fast with gear.
October 1, around released
September 28, shipping 1,200 yen (excluding tax)

Super Avante Black Special (with carbon reinforced wheel)
Super Avante Black Special (with carbon reinforced wheel) is a special edition of Super Avante that smoke color of the body is to produce a fearless. A combination of short wheelbase of VS chassis in a compact, lightweight, 5-spoke wheel is blue plating, further carbon reinforced wheel (black) plus of the same design. Yellow of the tire has less contact resistance of the road surface, is a corner a lot of technical course direction of the large-diameter Narobareru (hard type).
★ four wheel drive mini special planning SUPER AVANTE BLACK SPECIAL (W / CARBON REINFORCED WHEELS) (95291) ★ coordinate all also started A parts and rear roller stay the chassis body in black color. ★ metal tone sticker is shiny. ★ 4.2: 1 with the speed gear.
October 1, around released
September 28, shipping 1,000 yen (excluding tax)

Flame Us Institute Red Metallic (with carbon reinforced wheel)
Flame Us Institute Red Metallic (with carbon reinforced wheel) is a special model in which the body of the Flame Us Institute in matte red plating specification. In addition, the wheel is in addition to the 5-spoke type of matte red-plated finish to match the body, plus also carbon-reinforced wheel of fin design. The chassis also roller and rear skid bars and black color AR. Tires were also fitted with a low-height type of black color.
★ four wheel drive mini special planning FLAME ASTUTE RED METALLIC (W / CARBON REINFORCED WHEELS) (95292) ★ high strength adopt the AR chassis monocoque structure. Chassis body, of course, low-friction resin A parts and 13mm plastic rollers also unified in black color. ★ 3.5: 1 ultra-fast with gear.
November release

Festa Jonu gold metallic (with carbon reinforced wheel)
Festa Jonu gold metallic (with carbon reinforced wheel) matte gold-plated body is a special model of gorgeous Festa Jonu. Body and in addition to the fin design wheel of color-coordinated the matte gold-plated, also features were set a carbon reinforced wheel of dish design as plus one item. Simple integrated MA chassis equipped with a double-shaft motor in the center of the vehicle body has a gray color.
★ four wheel drive mini special planning FESTA JAUNE GOLD METALLIC (W / CARBON REINFORCED WHEELS) (95293) ★ 6 pieces of the roller and the gear cover, A part is light gray made of low-friction resin, such as a skid bar. ★ equipped with a low-height tire with a diameter of 26mm. ★ 3.5: 1 ultra-fast gear, with double shaft motor.
November release

Four wheel drive mini Kumamonbajon GT
Four wheel drive mini Kumamonbajon GT the driving Surukumamon GT machine is the charm of mini four-wheel drive. Jiruborufu body is the image of a GT car of Europe. And light smoke parts as kumamon look better, and finish with a dedicated metallic stickers. “MA” in the midship motor layout chassis with excellent driving efficiency. The torque tune 2 motor PRO of both axis type was standard equipment.
★ four wheel drive mini special planning MINI 4WD KUMAMON VERSION GT (95302) ★ kumamon doll Zumi paint. ★ in fin design wheel of fluorescent yellow, set the low-height tire. ★ A component such as a roller Red of low-friction resin. ★ 3.5: 1 ultra-fast with gear.
December will be released

Mini four-wheel drive Panda GT
Mini four-wheel drive Panda GT panda driver riding a refreshing clear green of the machine is the attention. The body is the actual vehicle mood of Astral Star. We set the metallic sticker dedicated design. Wheel 3-spoke design of the fluorescent green, the tire is fitted with a small-diameter hard type of yellow. Chassis has adopted the MA was midship mount a double shaft motor.
★ four wheel drive mini special planning MINI 4WD PANDA RACER GT (95303) ★ panda driver doll Zumi paint. ★ MA chassis fluorescent green. A parts are made of low-friction resin of white, such as a roller. ★ torque tune 2 motor PRO, 3.5: 1 ultra-fast with gear.
December will be released

Four wheel drive mini Shirokumakko GT
Four wheel drive mini Shirokumakko GT is a mini four-wheel drive, which bear the driver got on the cool clear blue of the body. Sharp form is characterized by Raikiri body is the image of the movement of the sword, such as flow. White and Blue to tighten the style, and the orange line, the glaciers of the illustrations was prepared in the metallic tone of the sticker. Fluorescent orange to brilliant 5-spoke wheels, fitted with a blue low-height tires.
★ four wheel drive mini special planning MINI 4WD SHIROKUMAKKO GT (95304) ★ polar bear driver Zumi paint. ★ MA chassis is white, A part is light blue made of low-friction resin, such as a roller. ★ torque tune 2 motor PRO, 3.5: 1 ultra-fast with gear.
December will be released

Winning Bird Formula Clear Body Set (polycarbonate)
Winning Bird Formula Clear Body Set (polycarbonate) popular Winning Bird Formula Among the clear body. Polycarbonate clear body is lighter than the standard body, acceleration performance and top speed is up. Sticker was also set the transparent type.
★ four wheel drive mini Grade Up Parts Series Nanba503 WINNING FORMULA BIRD CLEAR BODY SET (POLYCARBONATE) (15503) ★ body hook, D components, such as catch, black made of ABS resin. Screws and double-sided tape is also set for mounting ★.
October 8 around released
October 5 shipping 480 yen (tax not included)

Lightweight plastic spacer set (12 / 6.7 / 6/3 / 1.5mm))
Lightweight plastic spacer set (12 / 6.7 / 6/3 / 1.5mm) is a plastic spacer indispensable for height adjustment of the roller and brake. Lighter than aluminum, since made therefore low friction resin even in contact with the track resistance is low, it suppresses a drop in speed to a minimum. Set each size four-by-four.
★ four wheel drive mini Grade Up Parts Series Nanba506 LIGHTWEIGHT PLASTIC SPACER SET (12 / 6.7 / 6/3 / 1.5Mm) (15506) ★ 1.5 to set a four-by-four, respectively five lengths of up to ~ 12mm, corresponding to the subtle height adjustment. ★ color is black.
October 8 around released
October 5 shipping 200 yen (excluding tax)

Offset tread tire hard (Green)
Offset tread tire hard (green) it is possible to change the tread by simply changing the direction to be attached to “offset tread tire” will add a large-diameter hard type of green color. Less grip than the standard tire, is also attractive cornering performance is high.
★ four wheel drive mini special planning OFFSET TREAD TIRES (HARD / GREEN) (95278) de ★ as “inner wear” and “outer wear”, you can change the front and back both 5 ~ 6mm tread compared to the standard tire.
October 8 around released
October 5 shipping 240 yen (excluding tax)

Super X · XX large diameter 5-spoke wheels and hard slick tire (Red)
Super X · XX large diameter 5-spoke wheels and hard slick tire (Red) Super X, is the best large-diameter wheel and a set of tires to the Super XX chassis. Wheel 5-spoke design of the white-collar. Slick of bright red color is advantageous hard type in resistance is less cornering.
★ four wheel drive mini Grade Up Parts Series Nanba504 LARGE-DIAMETER 5-SPOKE WHEELS Ando HARD RED SLICK TIRES (For SUPER X Ando XX CHASSIS) (15504) ★ compared to other large-diameter wheels, wider tread when mounted point is also not too. ★ wheel & 1 vehicle tire.
November 12, around released
November 9 shipping 320 yen (excluding tax)

Mini four-wheel drive motor case 2
Mini four-wheel drive motor case 2 is the motor case can hold the motor shape of Single shaft, both axes up to eight regardless. With a guide to hold the motor, also points motor with each other is not hit in the portable. It prints the motor of illustrations and characters in black.
★ four wheel drive mini Grade Up Parts Series Nanba505 MINI 4WD MOTOR CASE 2 (15505) ★ mini four-wheel drive motor can be a total of eight storage, also available for pinion gear space. ★ case body and the lid is clear.
November 12, around released
November 9  260 yen (excluding tax)

HG narrow large diameter aluminum wheels (4)
HG narrow large diameter aluminum wheels (4) is a luxury large diameter narrow wheel of aluminum machined out unique. Accuracy, less blurring of the wheel during rotation for high strength both, also is also a point of difficult deformation also a major shock, such as off the track.
★ four wheel drive mini special planning HG ALUMINUM LARGE DIA. NARROW WHEELS (4PCS.) (95275) ★ deep rim design. ★ In addition to the aluminum wheel four, also mounting wheel Bush comes with eight.
November 12, around released
November 9 shipping 1,200 yen (excluding tax)

HG low-height tire for aluminum wheels (four
HG low-height aluminum wheel (4) tires for high-quality machined aluminum out made of low height for a tire wheel. High precision and strength, also features a shake of the wheel in the rotation is small. Less deformation even in the unlikely event of a crash, the effect of tightening the feet of the machine in the glow a certain finish is also excellent.
★ four wheel drive mini special planning HG ALUMINUM WHEELS FOR LOW PROFILE TIRES (4PCS.) (95276) ★ 5 simple round hole dish design of the hall. ★ In addition to the four wheels, wheel bush with eight mounting.
November 12, around released
November 9 shipping 1 included entry number 120 1,200 yen (excluding tax)

Power Champ RS (12 pcs.)
Power Champ RS (12 pieces) high-performance AA alkaline batteries that can be used in four wheel drive mini official competitions of Tamiya, is 12 sets of power Champ RS. To increase the capacity and the current discharge performance, strong run, of course, stamina enough. Lacy design was based on red and white is the mark.
★ Battery & Charger series Nanba118 POWERCHAMP RS (12PCS.) (55118) ★ plenty to enjoy deals Set of 12 a day mini four-wheel drive. ★ also ideal for power use and the transmitter of the star unit series.
NovemberRelease 1 included input number 50 1,300 yen (excluding tax)

Transparent universal plate (two sets)
Transparent universal plate (two sets) will add a clear specification to be used widely universal plate, such as the chassis and frame of various types of machine tools. Hole of 3mm diameter spaced at 5mm intervals, universal arm and gear box can be installed. It is effective to show the movement of the mechanism.
★ Other Special Products CLEAR UNIVERSAL PLATE SET (2PCS.) (69906) ★ plate size is 160 × 60 × 3mm. ★ In addition to the angle material and bearing material, push rivets were also set.
October 8 around released
October 5 shipping 600 yen (tax not included)

Transparent universal plate L (210x160mm)
Transparent universal plate L (210x160mm) is a transparent plate plus the mechanical mood to finish. Hole of 3mm diameter spaced at 5mm intervals, such as the gear box of the various tools can be mounted easily. With the Tamiya of the clear color, you can enjoy the finish of transparent material unique is.
★ Other Special Products CLEAR UNIVERSAL PLATE L (210X160mm) (69907) ★ angle material and bearing material, was also set screw and nut for mounting. ★ plate size is 210 × 160 × 3mm.
October 8 around released
October 5 shipping 660 yen (tax not included)

Shaft drive unit
Shaft drive unit is a shaft drive type of drive unit that can transmit power to a remote location. Compared to the chain and pulley, in the distance the rotation in a more space-saving, to be able to communicate in a variety of orientations Features. Detachable mounting parts for fixing the unit, such as a universal plate (unit mount) is also set. From four-wheel drive vehicles work, to a variety of power transmission equipment, increases the likelihood of moving work.
★ fun tool series Nanba225 SHAFT DRIVE UNIT (70225) ★ shaft can adjust the power transmission distance and set the two types of different lengths. With rubber pipes to connect the shaft ★. ★ unit case is made of ABS resin of mechanical clear.
October 8 around released
October 5 shipping 580 yen (tax not included)

Grumman F-14A Tomcat
Grumman F-14A Tomcat carrier-based fighter F-14 Tom Cat of the United States Navy, which currently also boasts enormous popularity. F-14A is the initial production type is added to finally 1/48 masterpiece machine series. Characteristic variable wing is movable work together both wings. As an air bag and ceiling panels are presumed dead, switch the formula to fill the gap between the wing and the fuselage, even after completion you can enjoy both the wing forward state-recession state. Set in the kit standard rich armament parts.
★ 1/48 masterpiece machine series Nanba114 1/48 GRUMMAN F-14A TOMCATTM (61114) ★ total length 398mm. ★ cockpit interior and legs storage also precisely reproduced. ★ set the crew of doll 2 body of the seated posture. ★ Haibiji US Navy two and one marking a total of three types with Iran Air Force painting era.
November 12, around released
November 9 shipping 7,800 yen (excluding tax)

NSX
NSX early Honda of super sports world’s attention is also appeared in 1/24. Aerodynamic and modeling to feel plenty of dynamic form that takes into account the cooling of each part. Reproduce the actual vehicle similar frame structure, the process of attaching the V6 twin-turbo engine and the front and rear suspension there is also an actual vehicle as it is. Tight and functional interior is also realistic finish. Also set decals and window masking stickers.
★ 1/24 Sports Car Series Nanba344 1/24 NSX (24344) ★ total length 187mm. ★ it will be assembled to choose the right-hand drive specification and left-hand drive specification. ★ such as the door mirror surface and engine cover the upper part of the logo are available metal inlet mark with texture.
October 15, around released
October 12 shipping 3,800 yen (excluding tax)

Kawasaki Ninja H2R
Kawasaki Ninja H2R Kawasaki Superbike has attracted attention as one of the world’s fastest, Ninja H2R will join the 1/12 motorcycle series. Precisely reproduce the water-cooled parallel four-cylinder engine equipped with a supercharger. Actual vehicle modeled as it is a unique structure, such as cowl kind in pursuit of trellis frame and aerodynamic. Engine and swing arm, upper cowl, and side cowl and secure it to the frame with screws.
★ 1/12 motorcycle series Nanba131 1/12 Kawasaki Ninja H2R (14131) ★ total length 172mm. ★ car name logo and “River mark” is a metal inlet mark. ★ exhaust pipe, muffler, plated parts such as tail light case. ★ slick texture some made of solid rubber.
December Release  4,000 yen (excluding tax)

America 155mm self-propelled artillery M40 Big shot
America 155mm self-propelled artillery M40 Big shot diverted component of M4 Sherman series, self-propelled artillery, which was equipped with a new 155mm cannon is M40. It has been developed in the Second World War the end, in the Korean War has demonstrated the tremendous power to support fire. The M40 is appeared in the 1 / 35MM series long-awaited. Reproduce the thrilling sight, such as the body of a huge 155mm cannon and planar configuration expressively. We set an occupant of the doll 8 body floating tension in the shooting preparation.
★ 1/35 Military Miniature Series Nanba351 1/35 US SELF-PROPELLED 155Mm GUN M40 (35351) ★ total length 305mm. ★ vertical movement of the main gun vehicle similarly controlled in such equilibrium machine to use the poly cap. ★ for the shells and ammunition transportation rack, cylindrical charge storage case is also set forth. ★ Korea decal two with a time of war.
December Release

American M40 Big shot metal barrel set
American M40 Big shot metal barrel set M40 further detail up parts appeared to favor the big shot. Reproduce the gun barrel of the strikingly conspicuous 155mm cannon with machined aluminum. Was also subjected to the life ring pattern is inside the muzzle. Brass shells 10 rounds also set.
★ detail up parts series Nanba70 1/35 US M40 METAL GUN BARREL SET (12670) ★ greatly improve the feel and accuracy by replacing the kit of parts. ★ also available decals to reproduce, such as bullet species display of shells.
December Release

Ground Self-Defense Force Komatsu LAV
Ground Self-Defense Force Komatsu LAV light armored vehicles deployed in the center of the Ground Self-Defense Force has been advanced is added to 1 / 48MM series. Modeled in the latest specification of domestic improvements in detail on the basis of the lessons learned at the time of Iraq has been subjected to. Decal set one and MINIMI machine gun-equipped two vehicles captain in with a smoke grenade launchers. It will be assembled to choose the three types according to the vehicle specifications. Make comparison and scene-making of the type 10 of 1/48 I look forward to.
★ 1/48 Military Miniature Series Nanba90 1/48 JAPAN GROUND SELF DEFENSE FORCE LIGHT ARMORED VEHICLE (32590) ★ total length 93mm. ★ by the full cooperation of the Ground Self-Defense Force, condensing a unique style of planar configuration to 1/48 size. ★ body upper surface of the hatch is open or closed. Doll one body with a driver wearing the latest body armor
December Release

Blackfoot (2016)
Blackfoot (2016) is intact was released basic structure of the Blackfoot in 1986, is a reprint RC car that made improvements. The characteristic resin space frame, front double wishbone, equipped with 4 independent suspension of the rear trailing arm, four fitted with excellent CVA oil dampers to shock absorption. Transmitted to the rear wheels without any loss of power, we have adopted the assembly universal shaft there is no risk of falling off.
★ 1/10 electric RC Car Series Nanba633 1/10 RC BLACKFOOT (2016) (58633) ★ total length 440mm. ★ equipped with aluminum under cover to protect the RC mechanism. ★ body angulated was form lets you feel the strength is high impact resistance ABS resin. With driver figure to increase the feeling
Now On Sale 17,800 yen (excluding tax)

Honda Civic SiR (EG6) (TT-02D chassis) drift spec
Honda Civic SiR (EG6) (TT-02D chassis) drift spec sports model in the fifth generation Honda Civic, which appeared in 1991, the SiR finished to drift specification. Chassis TT-02 is based maintainability also high shaft drive 4WD excellent steering stability. The 4-wheel independent double wishbone suspension equipped with CVA Super Mini oil dampers and, full bearing of a drive system. The Sport-Tuned motor was also equipped with an aluminum motor heat sink.
★ 1/10 electric RC Car Series Nanba637 1/10 RC Honda CIVIC SiR (EG6) (TT-02D CHASSIS) DRIFT SPEC (58637) ★ total length 414mm. ★ equipped with a super drift tires mesh wheel of matte chrome-plated finish. Also it comes with ★ sticker to be finished in carbon bonnet tone.
October 8 around released
October 5 shipping 1 included input number 4 15,800 yen (excluding tax)

NSX (TT-02 chassis)
NSX (TT-02 chassis) Wakase the sports car fans around the world, is also appeared in RC early new NSX has just been officially announced in the country. Reproduced polycarbonate body the vehicle as it is a low-wide forum which honed aerodynamic. Head lamp is realistic in the combination of polycarbonate light case and stickers called “Jewel eye” on one side 6 lights. Also long distinctive door mirror of the stay provided in separate parts.
★ 1/10 electric RC Car Series Nanba634 1/10 RC NSX (TT-02 CHASSIS) (58634) ★ total length 438mm. ★ Honda specification, two types of stickers of Acura specification. ★ to mesh wheel, the tread pattern is also fitted with a realistic radial tire. ★ chassis of the shaft 4WD TT-02.
October 15, around released
October 12 shipping 1 included input number 6 12,000 yen (excluding tax)

Mazda Demio (M-05 chassis)
Mazda Demio (M-05 chassis) , including the Japan Car of the Year 2014-2015, is the award-winning Mazda compact car, Demio appeared in the electric RC car. Realistic in polycarbonate the form of lively, called “Tamashido”. Including the front and rear lights, body side that are options set by the vehicle of (Upper & Lower) graphics also available in stickers. Chassis has adopted the M-05 of the front-wheel drive.
★ 1/10 electric RC Car Series Nanba640 1/10 RC MAZDA2 (M-05 CHASSIS) (58640) ★ total length 377mm, wheelbase 239mm. ★ door mirror is provided in separate parts. ★ to 5-spoke wheel of silver color, was fitted with a 60D radial tire tread pattern has been engraved.
It will be released this winter

MAN TGX 18.540 4×2 XLX (French Blue) full operation set
MAN TGX 18.540 4×2 XLX (French Blue) full operation set to paint, including the body-related parts in a vivid French blue cab, was subjected to a top coat of urethane-based model. Beautiful body only painting of the details will be completed. In addition, it equipped with optimal MFC-03 unit in the Europe-based trailer head. Beginning a variety of sound and lights illuminate the large displacement diesel engine sound, body vibration also was reproduced. The body with lots of metal parts is also sufficient to make Gotae.
★ 1/14 RC Big Truck Series Nanba49 1/14 RC MAN TGX 18.540 4X2 XLX (FRENCH BLUE EDITION) FULL OPERATION KIT (56349) ★ total length 458mm. ★ gear change while driving can be enjoyed by the three-speed transmission. ★ stick type of 4ch transmitter and the running for the battery charger is also set. ★ trailer coupling is also possible (sold separately).
October 8 around released
October 5 shipping 1 included input number 1 88,000 yen (excluding tax)

XB NSX (TT-02 chassis)
XB NSX (TT-02 chassis) super sports world’s attention, NSX is joins the XB series. The elegant form with excellent aerodynamic and realistic in polycarbonate, painted in pearl white. Long characteristic door mirror of stay tightens the style. Chassis adopts the TT-02 of the controller Bull shaft drive 4WD. RC mechanism has little worry of interference, is a 2.4GHz specification that there is no hassle of band exchange.
★ 1/10 Expert Built series Nanba199 1/10 RC XB NSX (TT-02 CHASSIS) (57899) ★ total length 438mm. ★ to mesh wheel, the tread pattern is mounted on a realistic radial tire. ★ wheel trigger type of transmitter and the running for the 7.2V battery charger has also been set.
November 12, around released
November 9 shipping 1 included input number 2 25,800 yen (excluding tax)

TRF Super Short big bore damper (4)
TRF Super Short big bore damper (4) 6.5Mm to reduce the mounting length compared to the TRF special damper, is a high performance oil dampers was 1.2mm expanding the cylinder bore. The internal aluminum cylinder mirror processing, achieve a smooth operation is subjected to less HL coat hardness is high frictional resistance.
★ TRF series Nanba305 TRF SUPER SHORT BIG BORE DAMPER (4PCS.) (42305) ★ POM resin scraped out made pistons and aluminum spring retainer, standard equipped with a titanium-coated piston rod.
October 22 around released
October 19 shipping 8,800 yen (excluding tax)

Large-diameter short spring set for Touring Car
Large-diameter short spring set for a touring car is spring sets to match the characteristics of the TRF super short big bore damper. Characteristically has excellent steering response. Three of available hardness pulling, you can perform the setting to match the road conditions.
★ TRF series Nanba306 TOURING CAR LARGE DIAMETER SHORT SPRING SET (42306) ★ set three kinds of hardness of the spring by two each. ★ also comes with red and green tube for identification.
October 22 around released
October 19 shipping 900 yen (excluding tax)

Hop up Options
OP.1724 TA07 Aluminum servo mount … Launched in October 2,500 yen (Tax not included)
OP.1725 TA07 aluminum motor mount Post … Launched in October 800 yen (Tax not included)
OP.1726 TA07 front one-way (37T) set … Launched in October 4,400 yen (Tax not included)
OP.1727 TRF-SSBB damper oil seal (4) … Launched in October 360 yen (Tax not included)
OP.1728 TRF-SSBB damper piston (4) … Launched in October 500 yen (Tax not included)

RC Special
1/10 RC Porsche 911GT2 racing (TA02SW chassis) … Launched in October 17,800 yen (Tax not included)
TB-04 Carbon Damper Stay Set (TRF-SSBB) … Launched in October 2,800 yen (Tax not included)
Adjustable aluminum wing stay (Silver) … Released in November 2,500 yen (Tax not included)

Source: amiami hobby news

Some new item descriptions:

RC
58640 Mazda Demio (outside Japan Mazda 2) M-05 chassis

Mini 4WD
95292 Flame Astute Red Metalic (w/Carbon Reinforced Wheels)
95293 Festa Jaunes Gold Metallic (w/Carbon Reinfoced Wheels)
Shirokumakko GT
Panda Racer GT
Kumamon Version GT

Source: http://gigazine.net/