74126 HARD COATED FILE PRO (HALF-ROUND 5Mm Width)
subjected to hard chromium coating on carbon tool steel, is a small precision file that achieves the lack of high durability and clogging. With a wide range of metal such as stainless steel to plastic, smooth finish of the cut surface is the feature.
★ black color of the grip is a special coating finish to adapt to the hand slip. ★ with a plastic case.

69905 MODELER’S KNIFE (FLUORESCENT ORANGE)
bright fluorescent orange of the grip is directing the fun of modeling. Parting line finishing and the fine parts, ideal for such as the shaping of post-putty prime doll remodeling. Rich in delicate cutting edge tenaciously durability, is also active in the work to cut the plastic.
★ less likely to spill blade also work to cut make a blade, you can use a variety of processing operations. ★ protection cap and the blade 25 pieces.

95093 RAIKIRI (MA CHASSIS) JAPAN CUP 2016
is the emergence Memorial model for the summer of the Japan Cup. It finished the popularity of Raikiri to white base of the pace car style. MA chassis having a high strength polycarbonate ABS resin. Battery holder and A parts is black made of low-friction resin, such as the gear cover. The super-hard low-height tire was printing the Japan Cup logo “JAPAN CUP 2016 TAMIYA” in white.
★ stickers, dedicated design that contains the Japan Cup logo. ★ wheel, three-dimensional design is impressive Y-spoke type (red). ★ gear ratio is 3.5: 1. ★ motorized.

95266 DASH-5 DANCING DOLL PREMIUM (SUPER-II CHASSIS)
“Dash! Yonkuro” in appeared in the dash corps only female, Sumeragiwako of machine is appeared in the premium specification. Vertical fin of the vertical and horizontal tail and side pontoons distinctive sharp form attractive. The chassis is made of ABS resin of dark blue. Turn switch, 2-point fixed rear stay, and the A component such as a 13mm roller, open locks one lock gear cover is yellow parts available at the touch of a button.
★ sticker new design of metallic tone. ★ fitted with slick tires on 5-spoke wheels. ★ high Super II chassis adoption of evaluation in the race. ★ gear ratio is 4.2: 1. ★ motorized.

15497 HG CARBON REINFORCING PLATE For 13 / 19Mm ROLLER (1.5Mm)
is a carbon plate of straight bar shape that can be used in a variety of remodeling. It can be attached to 13mm or 19mm roller full provisions width. In Lacey carbon pattern, Tamiya mark and white print, such as a roller size shine.
★ 1.5Mm in addition to the carbon plate 2 sheets of thick, screws and nuts for parts mounting, washer, etc. also set.

15498 HG CARBON WIDE FRONT PLATE (1.5Mm)
is 9,11,13,19mm 1.5mm thick carbon steel stays of which is fitted with a roller to the full provisions width. Lightweight, high strength, white print, such as the unique carbon pattern and Tamiyarogo will boost the racing mood.
★ MA, MS, AR, VS, Super II, can be attached to the Super XX chassis. There are some things processing is required.

15499 HG CARBON WIDE REAR PLATE (1.5Mm)
is attached to 9,11,13,17,19mm roller full provisions width, is a high strength 1.5mm thick carbon steel stays. In addition to the racy carbon pattern, was white print the diameter of Tamiyarogo and can be mounted roller.
★ MA, MS, AR, VS, super Ⅱ, Super X, Super XX, will be attached to the Super TZ-X chassis.

15502 THUNDER SHOT CLEAR BODY SET (POLYCARBONATE)
ideal for lighter remodeling that has become the mainstream in the race. Small is the Thunder shot clear body set of Jr. on the front projected area in the lightweight among successive clear body. Improved acceleration performance and maximum speed, also increase the running stability with a low center of gravity.
★ strong unbreakable polycarbonate body into shock. ★ with clear body dedicated transparent sticker.

95091 HYPER-DASH 3 MOTOR J-CUP 2016
is the motor that was to commemorate the popular annual Japan Cup. Produce a premium sense of backing and special design with larger layout characters JAPAN CUP 2016 to motor label. Even as a souvenir, it can also be used for the race.
★ motor label Gold & Green. ★ adopt the electrical efficiency and durability of excellent silver carbon brush in the balance.

95092 HYPER-DASH MOTOR PRO J-CUP 2016
Japan Cup special anniversary model of Expert mini 4WD PRO for high-performance motors. Mount and motor label in JAPAN CUP character largely laid out the features of 2016. It was to balance the electrical efficiency and durability adopted a silver carbon brush.
★ end bell is red, motor label Silver & Black. ★ adopt a silver carbon brush. ★ mini 4WD PRO only.

95270 A-SPOKE WHEELS For LOW-PROFILE TIRES (SILVER PLATED)
in 1/1 GIANT MINI 4WD PROJECT (Aero Avante vehicle of), is the wheel for four wheel drive mini with the image of the aluminum wheel that has been adopted in the actual vehicle. American style of design with the motif of “A” in the alphabet is attractive.
★ narrow tread type of silver plating specification. ★ 4 pieces of one minute. ★ four wheel drive mini PRO, you can use the mini four-wheel drive each car.

55117 POWERCHAMP RS
available in four wheel drive mini official competitions of Tamiya, is a high-performance AA alkaline batteries. Than the power Champ far, capacity and current discharge performance Gunto up. Strong run when power is needed, of course, stamina is also enough.
★ excellent in impact resistance, stable performance. Lacy design was based on red and white ★. ★ 2 bottles.

70223 FRICTION POWERED SNAIL
the second installment is snail ecological tool set that the battery also not be used motors. Flywheel (flywheel) is the energy of the inertia to rotation, go leisurely. Shell and polypropylene sheet body is a flexible. The person who crank attachment of, advance shaking his head and tail to the left or right, or you will be assembled to choose the two operations to proceed by moving back and forth the head. The maximum duration running time is about 35 seconds.
★ total length of about 155mm. ★ become the shape of the head is to guide, and well avoid the obstacle. ★ necessary parts are all set, screws and inset only in assembling OK. ★ power unit is made of a transparent ABS resin.

70224 SWIMMING DOLPHIN
is a tool set of dolphins swim by moving the tail fin and the head up and down. Changing the rotational movement of the underwater gear box into a reciprocating motion in the crank, swim by moving the tail fin of a soft resin sheet up and down like a dolphin. Also possible to swim while turning to the left and right by adjusting the mounting angle of the dorsal fin and the sucker. If you change the mounting position of the crank or a float, you can also change how to swim and speed.
★ total length of about 180mm. ★ body and a soft resin sheet is pretty pink, such as the tail fin. All set the required parts ★. Easy assembly with a simple structure. ★ AAA batteries single use (sold separately).

95281 KUMAMON MINI 4WD – SUPPORTING KUMAMOTO
is a special specification of mini four-wheel drive to cheer the Kumamoto Prefecture. Do your best! Kumamoto mini four-wheel drive (kumamon version), use a clear gray body of Raikiri. It is a specification that assembly and pre-painted bear Mont drivers look better. Of course, marking was also set the metallic type of dedicated. The double shaft motor mounted on the center of the vehicle body, MA chassis of midship layout is black color.
★ total length 156mm. Set the low-height tire of black 5-spoke wheels of yellow ★. ★ standard equipped with a high-performance Rebuchun 2 motor PRO, 3.5: 1 ultra-fast gear with. ※ benefit the full amount of this product, we will be donated from Tamiya in Kumamoto.

95279 ASTRO-BOOMERANG CLEAR BLUE SPECIAL (SUPER-II CHASSIS)
hero of the four wheel drive mini manga “Dash Boy heaven”, the car Astro boomerang of world peace comes a special color. Body and the front wing is refreshing clear blue with a rear shape of the image of a sharp nose and forward wing. Color ring for the sticker is also a specialized products of the clear. Super Ⅱ chassis white made of ABS resin, A component is made of blue ABS resin.
★ total length 150mm. ★ large diameter narrow lightweight wheels of white, we set the hard barrel tire of low running resistance Blue. ★ 4.2: 1 speed gear, motor with.

NEW BURNING SUN (Tentative Name) (Reference Exhibit)
the Tankuro new machines that appeared in “Hyper Dash! Yonkuro (Hiroyuki Takei teacher Author)” series in the Shogakukan comics magazine “Colo Aniki” was a reference exhibit at the clay model. While leaving the image of the primary burning San heavyweight machine, it is a straight two big nose and rear inclined wing characteristic of extending to before.
★ total length 156mm. ★ chassis fabrication assumes the MA of midship motor in pursuit of driving efficiency.

18645 SILWOLF (MA CHASSIS)
the machine on which the image of a GT car in Europe is the emergence in the mini 4WD PRO series. Was placed a large air outlets on the bonnet, the body of the long nose and short deck, form that was equipped with a large rear wing is the actual vehicle a sense of plenty. MA chassis is made of gray ABS resin, six rollers and rear skid bars, A component such as a gear cover is made of low-friction resin light gray.
★ total length 156mm. ★ the perfect fin design wheel racing car, we set the low-height tire of black. ★ 3.5: 1 ultra-fast gear, double shaft motor with.

19448 PROTO-SABER EVOLUTION PREMIUM (AR CHASSIS)
in the four wheel drive mini cartoon “Bakuso Brothers Let’s & Go !! WGP”, the machine that Japan national team “TRF Victoires” J (Jay) is a favorite, is a premium version of the Proto Saber Evolution. Chassis high strength of the monocoque structure AR. Body color is purple. Chassis body is metallic gray made of ABS resin. Under panel and diffuser is made of low-friction resin of purple.
★ total length 155mm. ★ in Y-spoke wheels of silver, fitted with low-height tire of black. ★ sticker is only type of metallic tone. ★ 3.5: 1 ultra-fast gear, motor with.

24343 1/24 Ferrari FXX K
Ferrari circuit racing only model which is said to production volume only 30 cars or so, FXX K is appeared in 1/24. Complex modeling and characteristic rear spoiler of the front-end, large diffuser, of course, reproduce the widening has been body realistic. Such as bucket seats and center console of the left-right asymmetry, such as to surround the head, and in-room reminiscent of a racing car is a three-dimensional feeling enough finish.
★ total length 204mm. ★ equipped with a slick tire on a sharp 10-spoke wheels. Side of the logo are available in the mark. ★ left and right doors and rear cowl can be opened. Also make Gotae enough V-type 12-cylinder engine ★

12668 1/24 FERRARI FXX K PHOTO-ETCHED PARTS SET
etching parts, such as the beginning of the air intake and outlet portions of the front and rear bumper for the radiator cover will increase the sense of precision of the finish. In addition, the seat belt is composed of a dedicated sheet and etched parts, to produce a three-dimensional appearance.
★ etching parts bridge-less specification that there is no need or disconnect the gate. ★ seat belt is sticker type.

12669 1/24 FERRARI FXX K CARBON PATTERN DECAL SET
body exterior from the engine room, FXX K. carbon up to the interior has been used abundantly Enhance the model of perfection more, it is a carbon-like slide mark. It was composed of three types of carbon pattern to suit the part.
★ printing in a state in which the combined shape to each part. ★ sticking with illustration. Mount size 130mm × 270mm.

92197 1/100 FUJI DREAM AIRLINES EMBRAER 175
Brazilian state-of-the-art small-sized passenger jet that Embraer has been the development of, Embraer 175 appeared in the 1/100 scale assembly kit. It was modeled without leaving the beautiful style. Cockpit interior, such as seats and instrument panel also three-dimensional realism finish. Fuji Dream Airlines set the large-format decals that can be reproduced by selecting a colorful aircraft from Unit 1 (FDA) has been operating up to 10 Units.
★ total length 315mm. ★ modeled in a tarmac state that issued the front legs and the main landing gear. ★ fuselage top and bottom of the antenna of any kind a sharp finish. ★ window of the cockpit is reproduced in the transparent parts. ★ also available weights to put inside the nose.

35350 1/35 US TANK DESTROYER M10 (MID PRODUCTION)
and M10 tank destroyer of the United States military’s popular along with M4A3E8 is awaited is the emergence in 1 / 35MM series. A powerful figure that has been constructed at an inclination armor with a large bolt, modeled realistically based on the actual vehicle coverage. Turret and combat the indoor part of the open-top also loading unit and the sight 3-inch guns, ammunition rack, such as three-dimensional feeling enough. It appeared in the North African Campaign late, also spread the width of the scene produced only in the continued fight M10 in a wide range of fronts. ★ total length 196mm. ★ casting pattern of the front portion of the vehicle body and mantlet, upper body and turret of the welding pattern also delicate finish. ★ T51 type track is handy belt-type realistic. ★ crew of dolls three bodies in the shooting preparation, decal two with.

37023 1/35 GERMAN FIELD MAINTENANCE TEAM Ando EQUIPMENT SET
is a set of various types of equipment that can produce a German field maintenance facility, which is provided to the front line. Simple cranes and work desk, welding gas cylinder, provides a broad range of accessory parts such as paint for the compressor. The crane using a metal chain of ultra-fine, also newly added hook portion. Two bodies with dolls of soldiers during the maintenance work. Scene production in combination with a wide range of German military vehicles, such as Kubelwagen can enjoy.
★ jack and drums, twelve early type jerry cans, oil cans, tool box, tooling, set well as Zatsugu box. ★ enameled wire and nylon yarn that can be used as a wire or wire rope was also prepared.

32588 1/48 JAPAN GROUND SELF DEFENSE FORCE TYPE 10 TANK
type 10 has attracted a great deal of attention as a fourth-generation Japanese main battle tanks of the Ground Self-Defense Force will join the 1 / 48MM series as the first of the working tank. Land do the actual vehicle coverage and thorough by the full cooperation of the Self-Defense Forces, updates to model the latest C4 specification which has been deployed from the second half of 2014 the respective units. 1/35 comparison of the type 10, the display of side-by-side uniform mainstay fighter F-15J of the Air Self-Defense Force in the same 1/48 would also be fun.
★ total length 199mm. ★ body inside of weights produce a sense of weight. ★ consolidated prefabricated track with one-piece straight sections. ★ tank length of the bust, decal two types with the first tank battalion and the eighth Tank Battalion belongs vehicles.

61114 1/48 Grumman F-14A Tomcat (tentative name)
carrier-based fighter F-14 Tom Cat of the United States Navy, which currently also boasts enormous popularity. F-14A is the initial production type is added to finally 1/48 masterpiece machine series. Characteristic variable wing is movable work together both wings. Fuselage as presumed dead, switch expression some parts, accurately models both of the wing forward state-recession state. When combined with missile set of simultaneous release, you can reproduce the powerful weapons mounted state.
★ total length 398mm. ★ cockpit interior and legs storage also sense of precision sufficient. ★ realistic RIO doll pilot and the rear seat is using the latest digital modeling technology. ★ marking two types with the VF-2, VF-84 belongs machine. Please enjoy the F-14A of the era was the most colorful.

61115 1/47 F-14A Weapon Set A US air-to-air missiles set (tentative name)
1/48 F-14A set of essential air-to-air missile not to Tom Cat aircraft and released at the same time. F-14 dedicated AIM-54A and the AIM-54C Phoenix, AIM-7E and the AIM-7M Sparrow intermediate-, AIM-9H and set the AIM-9L / M Sidewinder short-range.
★ each part of the fin and the details of the mold is also a sharp finish. ★ such as the fuselage of the band and the note was prepared decal.