Tamiya 95221 JR Mini 4WD Carry Pit
– Machine, parts case, large transporter of convenient large capacity to carry in your houses and tools
– Optimal transporter at the time of participation of the four wheel drive mini race is appeared.
– Interior divided into two upper and lower stages are possible storage of a large capacity.
– Four wheel drive mini multi-case and mini four wheel drive parts case set in the upper part, a tool, such as a low height machine, lower the machine and four wheel drive mini catcher, such as a mini four wheel drive check box can be stored.
– In addition, the back side of the upper lid can be used as a pit table, it will come in handy in the tournament venue.
– Upper and lower is simple lock by causing the handle to prevent jumping out of the storage product by tightening forgetting to buckle.
– Four wheel drive mini logo and carved full of a sense of official.
– Size 434 × 233 × 271mm
– Body buckle Handle cover material: impact-resistant copolymers
Tamiya 31359 1/700 IJN Light Cruiser Mogami (Water Line Series)
Full length: approx 286.5mm.
– The light cruiser, heavy cruiser, was transition to the aviation cruiser the origin `light cruiser` specification [top] 1/700 WL series first model!
– From light cruiser heavy cruiser, and top with a ship calendar that eventful that change the appearance to the aviation cruiser.
– Initial light and cruiser specification adds to finally WL series.
– Such as the smooth lines and induction chimney from the bow toward the stern, modeled without leaving the smart appearance.
– Massive full hull in the left and right split type, broadside part also three-dimensional feeling enough.
– Distinctive rear mast and cranes, high-angle guns of the rear deck next departure bullets loaded exercise machine is also a realistic finish.
– Main turret of 15.5cm3 twin assembled after pivotable.
– HeiSo-rui and main mast, even such as bridge sharp finish.
– 94 Equation No. 1 Water reconnaissance aircraft 1 aircraft and 95 Formula Water reconnaissance aircraft 2 aircraft is set.
Tamiya 84418 RC TT-02B MS details and photos
Appearance was decorated with popular TRF color in the race scene “TT-02B MS” is! It was fitted with a CAV oil damper on bathtub type of main frame, four-wheel double wishbone suspension of the long arm specification. In assembling the popular TT-02B chassis also as an entry 4WD buggy model with ease and high driving performance, it is a special model with standard equipment optional parts that are stable driving performance. The body is allowed to cockpit forward, the futuristic form of dual edge that has been configured with a smooth surface, we have set the TRF sticker that reproduces the MS color (Tamiya Racing Factory) machine. The underlying full-bearing specification of driving performance up. The propeller shaft and propeller joints that transmit the motor power can be made of aluminum, to improve the driving efficiency to minimize blurring of the shaft. Furthermore equipment completion such as aluminum rear upright to improve the stability of the front and rear FRP damper stays and cornering to expand the width of the setting is packed. It is recommended model that becomes the immediate use of the race.
The main parts accompanying
OP.497 TT-02B / TT-01 full bearing set
OP.1501 TT-02 aluminum propeller shaft
OP.1502 TT-02 aluminum propeller joint
OP.1556 TT-02B FRP front damper bracket set
OP.1557 TT-02B FRP rear damper bracket set
OP.1555 TT-02 FRP battery plate and transponder bracket set
OP.793 DF-02 Aluminum 2-way rear upright
Tamiya Plastic Model Factory Shimbashi Shop 7th Modelers Contest
Tamiya RC Car Grand Prix Videos – Auto Messe (Vol. 6) & Nagoya (Vol. 7)
Tamiya 58614 1/10 RC Suzuki Jimny JB23 – MF-01X chassis photo
More Tamiya previews and guidance of the 54th Shizuoka Hobby Show
Trader invitation date ※ general of the person can not be your admission
May 14, 2015 (Thursday) 9:30 to 16:30
May 15, 2014 (Friday) 9:30 to 16:30 public days in May 2014 16 day (Sat) 9:00 to 17:00 May 17, 2014 (Sun) 9: 00 ~ 16: 00 ※ gift, such as a plastic model to both days first 1,000 people to (junior high school or less interest) venue twin Messe Shizuoka sponsored Shizuoka model materials cooperative ⇒ 54th Shizuoka Hobby Show official website
Topic a lot, the nation’s largest scale of model hobby event “54th Shizuoka Hobby Show”. The exhibition in one fell swoop the new products to be released in the summer in the Tamiya booth. This time, new products of interest jostling with each genre! . You can see slowly and carefully the new product before the sale at the venue. Of course, also welcome questions and requests to explain staff! . Others, looking forward to shopping in uniform are a variety of products and goods “sales corner”. “The popular every year Tamiya open house “is also held at the same time. 2 days of doing hobby in the fresh green of Shizuoka, please come all together your family!
Tamiya Booth new product of attention!
★ 1/32 Aircraft Series de Havilland Mosquito FB Mk.VI
masterpiece versatile twin-engine machine mosquito of the Royal Air Force, which was called an active part in every mission, “wonders of the wooden machine”. Fighter-bomber type is its flagship type, FB Mk.VI (6) is appeared in 1/32 scale of force. Accurately model the elegant outline on the basis of thorough actual coverage. Wing adopted the actual similar structure to be joined to the body the robust main girder parts by connecting the left and right to the nucleus. Tire is full of attractions such as the tread pattern and its own weight deformation is realistic in the molding in the clever parts division. ★ full width 515mm. ★ cockpit interior and lower torso of the bomb bay also dense finish. ★ 7.7mm machine gun and 20mm cannon also precisely reproduce the nose. ★ 500ポンドbombs and crew of dolls three bodies, with marking three.
※ The photograph is a real machine. It is different from the product specifications.
★ 1/35 Military Miniature Series Germany Panther D type
biggest initial type of faces he Panther tanks tank battle in the “Battle of Kursk” in the first battle, D type is added to finally 1 / 35MM series. The only existing the vehicle carefully and interviewed, and modeled a complete new design a fearless figure with a tilt armor and powerful long-barreled 7.5cm gun in the Netherlands. Three detail up parts that complement the pivotal points effectively also appeared at the same time. Please check the origin of the masterpiece tank means. ★ Length: 254mm. ★ D-early also parts of smoke grenade launchers that can be seen in the. ★ track adopted a quick and realistic belt. ★ bust and the outside of the vehicle crew of doll one body of the commander, with decals three types of Kursk battle.
※ The photograph is an actual vehicle. It is different from the product specifications.
★ Mini 4WD PRO series shooting Proud Star (MA chassis)
was published in the “Colo Aniki” “Hyper Dash! Yonkuro” new car that appeared in the now also four wheel drive mini early. While leaving the image of the Dash No. 3 Shooting Star is a charming style features that have been configured with long thin canopy and complex rear of shape. Chassis is excellent in driving efficiency, has adopted the MA also can be easily assembled for easy maintenance integral structure. ★ to set the slick tire in the large-diameter four-spoke wheel of the white-collar. With marking sticker tighten the form ★. ★ with a double shaft motor. Gear ratio is 4: 1.
★ New entry RC car first wave [tentative name]
four AA batteries and the power source, all-in-one of the completed RC buggy is the new appearance. Brand New chassis buggy type of rear-wheel drive. 4-wheel strut suspension is a simple structure. The rear end it was equipped with a 370 type motor of easy to control characteristics. ESC and also unit with integrated receiver of 2.4GHz specification newly developed, can accommodate from 4.8V to 7.2V. ★ completed RC car of a full-length 282mm. The transmitter wheel type. ★ familiar Nezu Kota Mr. responsible for the design of polycarbonate body mini four-wheel drive. ★ steering servo using a 1/10 size.
※ The photograph is an image of being developed. It is different from the product specifications.
★1/10 engine RC car TG-10 Mk.2 FZ New with body [tentative name]
and a top speed of growth, the TG10-Mk.2FZ chassis exhaust sound of the charm that plays a high tone, was a combination of the body of the original design . Body that combines the styling and aerodynamic effects, which become familiar Nezu Kota’s hand in the four wheel drive mini. The overall form that stance low to wide, sharp headlights create a fearless look, is before and after the fender features protruding. Overall length 430mm. ★ duralumin Roi, with a Tamiya FS-12FZ engine and two-speed mission of the amount of exhaust 2.1cc a double deck frame of the resin upper to adopt the shaft 4WD chassis.
※ The photograph is an image of being developed. It is different from the product specifications.
★ 1/10 electric RC car Suzuki Jimny (JB23) (MF-01X)
is a Brand New models of compact M chassis size that adopts the shaft drive 4WD appeared. The main frame is divided into three parts monocoque, which is integrated to the gear box. Is placed next to the battery in the center of the vehicle body, it is equipped with a motor in the rear end. Double wishbone independent suspension, and fitted with a rally block tires for touring car. Body was chose Suzuki Shimuni (JB23 type). Overall length 347mm. ★ shaft 4WD chassis that ran enjoy it anywhere. ★ replace the central block of the frame, by combining the propeller shaft optional, three wheelbase are selectable.
★ 1/10 electric RC car RC buggy Kumamonbajon (DT-02)
popular bear RC car 2nd buggy style topped Mon driver. I put the doll of “Kumamon” to the two-wheel drive buggy you do not choose a place to run from on-road to off-road. Rode in the driver’s seat and hold the handle doll of “Kumamon” is set in the pre-painted completed state. 380 types of motors tractable power characteristics which is mounted on the vehicle body rear portion. Body impact styrene resin that can be painted. ★ Length: 390mm. ★ Kumamon and tomatoes, such as watermelon illustrations, liven up the fun stickers also rich set. ★ You can also enjoy the built in performance up the optional parts sold separately.
(C) 2010, Kumamoto Prefecture Kumamon
Hobby Show limited sale items
Hobby Show venue, in the Tamiya sale corner stocks charm full of goods. Please come and visit us. ※ Tamiya open house also it has been sold in the venue. Image “rice cake with kinako Tamiya package (2015 Shizuoka Hobby Show)”
Self-Defense Forces vehicle is coming !!
Only in a few opportunities Self-Defense Forces vehicle of force is the !! usually coming to the twin Messe Shizuoka to the eye, it does not miss this chance!
★ Date: May 16 (Sat), 17 (Sunday)
★ Location: Twin Messe Shizuoka first small exhibition hall Self-Defense Forces public relations corner before
cooperation: the Self-Defense Forces Shizuoka local cooperation headquarters / Ground Self-Defense Force first Armored Education Corps / Maritime Self-Defense Force Yokosuka District Headquarters recruitment support team
We will deliver a Ustream live video from the venue!
Last year of the video “Tamiya spring and summer new item report 2014”
May 15 (Friday) from noon 12:00, Ustream TAMIYA LIVE is ahead of the public days of the Shizuoka Hobby Show at, you can see the video of the early announcement of new products! While patrol a new product exhibition corner of Tamiya booth, and introduce the items to be worried about. It will deliver from the twin Messe Shizuoka to be the venue. ⇒Ustream TAMIYA LIVE · 2015 year5 month program
Simultaneous held Tamiya Open House!
★ May 16 (Sat), 17 (Sun.) 9: 00 ~ 16: 30
★ Venue: Shizuoka Suruga-ku Ondabara 3-7 Tamiya headquarters building
to open the Tamiya headquarters in Hobby Show public days. Professional staff in each department will answer your questions of everyone. History Museum and the exhibited products from wooden model era, including the lobby vehicle of F1 machine is exhibited, in the hotel, there is also an attraction corner and sales corner, such as machine tools Square and four wheel drive mini course. Please come by all means have all your family. ⇒ Open House information
“Let’s make a Mini 4WD with the 3D printer!” parent and child work experience classroom
In our society, with the cooperation of the Corporation Tamiya like, we have been held using the 3D printer of the topic now to participate in parent and child in the country the work experience course to make the original body for the “mini four wheel drive”. It is active in the goal that will be held in Japan 47 prefectures all regions. We will come to your city! !
Contents of the course
is to demonstrate the own way of imagination, 3D printer that can make what they want.
From the era that were not used previously only part of the mania, it’s getting to the age that can be used by anyone.
But there was that it was thought to hurdle in front of it. It was that “make a 3D model.”
So, Kai to take advantage of our 3D data (3D-GAN) I was thinking.
It dad from child, mother, or grandpa, that will make the opportunity to learn a fun 3D modeling together to grandma.
★ The 3D modeling their own way original body of parents and children the template to the original.
★ The first time any easy and fun, you can learn the manufacturing due to 3D.
★ And output the original body that was 3D modeling on the PC in the 3D printer
★ It was run by assembling the original body to the actual mini four wheel drive, and enjoy.
★ Safe because it uses the PC and the 3D printer, not dirt, it smells also rarely.
★ It is currently the mainstream, making those with the 3D data is I can experience in half a day.
★ Also 3D printer also offers PC. Your participants are not particularly those get available.
★ We plan to hold in the region of everyone you live. Please see the Conference Schedule.
[Template body is right now three, will increase in the future]
