RAIKIRI (MA CHASSIS) JAPAN CUP 2016 (95093)
is the emergence Memorial model for the summer of the Japan Cup. It finished the popularity of Raikiri to white base of the pace car style. MA chassis having a high strength polycarbonate ABS resin. Battery holder and A parts is black made of low-friction resin, such as the gear cover. The super-hard low-height tire was printing the Japan Cup logo “JAPAN CUP 2016 TAMIYA” in white.
★ stickers, dedicated design that contains the Japan Cup logo. ★ wheel, three-dimensional design is impressive Y-spoke type (red). ★ gear ratio is 3.5: 1. ★ motorized.

DASH-5 DANCING DOLL PREMIUM (SUPER-II CHASSIS) (95266)
“Dash! Yonkuro” in appeared in the dash corps only female, Sumeragiwako of machine is appeared in the premium specification. Vertical fin of the vertical and horizontal tail and side pontoons distinctive sharp form attractive. The chassis is made of ABS resin of dark blue. Turn switch, 2-point fixed rear stay, and the A component such as a 13mm roller, open locks one lock gear cover is yellow parts available at the touch of a button. ★ sticker new design of metallic tone. ★ fitted with slick tires on 5-spoke wheels. ★ high Super II chassis adoption of evaluation in the race. ★ gear ratio is 4.2: 1. ★ motorized.

HG CARBON REINFORCING PLATE For 13 / 19Mm ROLLER (1.5Mm) (15497)
is a carbon plate of straight bar shape that can be used in a variety of remodeling. It can be attached to 13mm or 19mm roller full provisions width. In Lacey carbon pattern, Tamiya mark and white print, such as a roller size shine.
★ 1.5Mm in addition to the carbon plate 2 sheets of thick, screws and nuts for parts mounting, washer, etc. also set.

HG CARBON WIDE FRONT PLATE (1.5Mm) (15498)
is 9,11,13,19mm 1.5mm thick carbon steel stays of which is fitted with a roller to the full provisions width. Lightweight, high strength, white print, such as the unique carbon pattern and Tamiyarogo will boost the racing mood.
★ MA, MS, AR, VS, Super II, can be attached to the Super XX chassis. There are some things processing is required.

HG CARBON WIDE REAR PLATE (1.5Mm) (15499)
is attached to 9,11,13,17,19mm roller full provisions width, is a high strength 1.5mm thick carbon steel stays. In addition to the racy carbon pattern, was white print the diameter of Tamiyarogo and can be mounted roller.
★ MA, MS, AR, VS, super Ⅱ, Super X, Super XX, will be attached to the Super TZ-X chassis

THUNDER SHOT CLEAR BODY SET (POLYCARBONATE) (15502)
ideal for lighter remodeling that has become the mainstream in the race. Small is the Thunder shot clear body set of Jr. on the front projected area in the lightweight among successive clear body. Improved acceleration performance and maximum speed, also increase the running stability with a low center of gravity.
★ strong unbreakable polycarbonate body into shock. ★ with clear body dedicated transparent sticker.

HYPER-DASH 3 MOTOR J-CUP 2016 (95091)
is the motor that was to commemorate the popular annual Japan Cup. Produce a premium sense of backing and special design with larger layout characters JAPAN CUP 2016 to motor label. Even as a souvenir, it can also be used for the race.
★ motor label Gold & Green. ★ adopt the electrical efficiency and durability of excellent silver carbon brush in the balance.

HYPER-DASH MOTOR PRO J-CUP 2016 (95092)
Japan Cup special anniversary model of Expert mini 4WD PRO for high-performance motors. Mount and motor label in JAPAN CUP character largely laid out the features of 2016. It was to balance the electrical efficiency and durability adopted a silver carbon brush.
★ end bell is red, motor label Silver & Black. ★ adopt a silver carbon brush. ★ mini 4WD PRO only.

A-SPOKE WHEELS For LOW-PROFILE TIRES (SILVER PLATED) (95270)
in 1/1 GIANT MINI 4WD PROJECT (Aero Avante vehicle of), is the wheel for four wheel drive mini with the image of the aluminum wheel that has been adopted in the actual vehicle. American style of design with the motif of “A” in the alphabet is attractive.
★ narrow tread type of silver plating specification. ★ 4 pieces of one minute. ★ four wheel drive mini PRO, you can use the mini four-wheel drive each car.

POWERCHAMP RS (55117)
available in four wheel drive mini official competitions of Tamiya, is a high-performance AA alkaline batteries. Than the power Champ far, capacity and current discharge performance Gunto up. Strong run when power is needed, of course, stamina is also enough.
★ excellent in impact resistance, stable performance. Lacy design was based on red and white ★. ★ 2 batteries.

FRICTION POWERED SNAIL (70223)
the second installment is snail ecological tool set that the battery also not be used motors. Flywheel (flywheel) is the energy of the inertia to rotation, go leisurely. Shell and polypropylene sheet body is a flexible. The person who crank attachment of, advance shaking his head and tail to the left or right, or you will be assembled to choose the two operations to proceed by moving back and forth the head. The maximum duration running time is about 35 seconds.
★ total length of about 155mm. ★ become the shape of the head is to guide, and well avoid the obstacle. ★ necessary parts are all set, screws and inset only in assembling OK. ★ power unit is made of a transparent ABS resin.

SWIMMING DOLPHIN (70224)
is a tool set of dolphins swim by moving the tail fin and the head up and down. Changing the rotational movement of the underwater gear box into a reciprocating motion in the crank, swim by moving the tail fin of a soft resin sheet up and down like a dolphin. Also possible to swim while turning to the left and right by adjusting the mounting angle of the dorsal fin and the sucker. If you change the mounting position of the crank or a float, you can also change how to swim and speed.
★ total length of about 180mm. ★ body and a soft resin sheet is pretty pink, such as the tail fin. All set the required parts ★. Easy assembly with a simple structure. ★ AAA batteries single use (sold separately).

1/24 Ferrari FXX K (24343)

Ferrari circuit racing only model which is said to production volume only 30 cars or so, FXX K is appeared in 1/24. Complex modeling and characteristic rear spoiler of the front-end, large diffuser, of course, reproduce the widening has been body realistic. Such as bucket seats and center console of the left-right asymmetry, such as to surround the head, and in-room reminiscent of a racing car is a three-dimensional feeling enough finish.
★ total length 204mm. ★ equipped with a slick tire on a sharp 10-spoke wheels. Side of the logo are available in the mark. ★ left and right doors and rear cowl can be opened. Also make Gotae enough V-type 12-cylinder engine

1/24 SCALE FERRARI FXX K PHOTO-ETCHED PARTS SET (12668)
etching parts, such as the beginning of the air intake and outlet portions of the front and rear bumper for the radiator cover will increase the sense of precision of the finish. In addition, the seat belt is composed of a dedicated sheet and etched parts, to produce a three-dimensional appearance.
★ etching parts bridge-less specification that there is no need or disconnect the gate. ★ seat belt is sticker type.

1/24 SCALE FERRARI FXX K CARBON PATTERN DECAL SET (12669)
body exterior from the engine room, FXX K. carbon up to the interior has been used abundantly Enhance the model of perfection more, it is a carbon-like slide mark. It was composed of three types of carbon pattern to suit the part.
★ printing in a state in which the combined shape to each part. ★ sticking with illustration. Mount size 130mm × 270mm.

1/100 FUJI DREAM AIRLINES EMBRAER 175 (92197)
Brazilian state-of-the-art small-sized passenger jet that Embraer has been the development of, Embraer 175 appeared in the 1/100 scale assembly kit. It was modeled without leaving the beautiful style. Cockpit interior, such as seats and instrument panel also three-dimensional realism finish. Fuji Dream Airlines set the large-format decals that can be reproduced by selecting a colorful aircraft from Unit 1 (FDA) has been operating up to 10 Units.
★ total length 315mm. ★ modeled in a tarmac state that issued the front legs and the main landing gear. ★ fuselage top and bottom of the antenna of any kind a sharp finish. ★ window of the cockpit is reproduced in the transparent parts. ★ also available weights to put inside the nose.

1/35 US TANK DESTROYER M10 (MID PRODUCTION) (35350)
M10 tank destroyer of the United States military’s popular along with M4A3E8 is awaited is the emergence in 1 / 35MM series. A powerful figure that has been constructed at an inclination armor with a large bolt, modeled realistically based on the actual vehicle coverage. Turret and combat the indoor part of the open-top also loading unit and the sight 3-inch guns, ammunition rack, such as three-dimensional feeling enough. It appeared in the North African Campaign late, also spread the width of the scene produced only in the continued fight M10 in a wide range of fronts.
★ total length 196mm. ★ casting pattern of the front portion of the vehicle body and mantlet, upper body and turret of the welding pattern also delicate finish. ★ T51 type track is handy belt-type realistic. ★ crew of dolls three bodies in the shooting preparation, decal two with.

1/35 GERMAN FIELD MAINTENANCE TEAM Ando EQUIPMENT SET (37023)
is a set of various types of equipment that can produce a German field maintenance facility, which is provided to the front line. Simple cranes and work desk, welding gas cylinder, provides a broad range of accessory parts such as paint for the compressor. The crane using a metal chain of ultra-fine, also newly added hook portion. Two bodies with dolls of soldiers during the maintenance work. Scene production in combination with a wide range of German military vehicles, such as Kubelwagen can enjoy.
★ jack and drums, twelve early type jerry cans, oil cans, tool box, tooling, set well as Zatsugu box. ★ enameled wire and nylon yarn that can be used as a wire or wire rope was also prepared.

1/48 JAPAN GROUND SELF DEFENSE FORCE TYPE 10 TANK (32588)
type 10 has attracted a great deal of attention as a fourth-generation Japanese main battle tanks of the Ground Self-Defense Force will join the 1 / 48MM series as the first of the working tank. Land do the actual vehicle coverage and thorough by the full cooperation of the Self-Defense Forces, updates to model the latest C4 specification which has been deployed from the second half of 2014 the respective units. 1/35 comparison of the type 10, the display of side-by-side uniform mainstay fighter F-15J of the Air Self-Defense Force in the same 1/48 would also be fun.
★ total length 199mm. ★ body inside of weights produce a sense of weight. ★ consolidated prefabricated track with one-piece straight sections. ★ tank length of the bust, decal two types with the first tank battalion and the eighth Tank Battalion belongs vehicles.

1/10 RC MERCEDES-BENZ G 320 CABRIO (MF-01 X CHASSIS) (58629)

Cross-country model G-Class of Mercedes-Benz. Among them, 1997 and 2001 were sold, G 320 Cabrio equipped with electric opening and closing the soft top adds to the electric RC car. Angulated was unique polycarbonate body, the texture of the hood part it is also enough. Chassis compact shaft drive 4WD to enjoy the run not choose the road surface from on-road to dirt, it adopted the MF-01 X.

★ total length 389mm. ★ of the front grille emblem and door mirror plating parts. ★ stitch of the hood is represented by a sticker. ★ The 7-spoke wheel was fitted with a hollow rubber tires.

1/10 RC PLASMA EDGE II (TT-02B CHASSIS) (58630)
Controller Bull maneuvers property is ideal as a basic 4WD buggy. Body and the rear wing is strong polycarbonate in shock at lightweight. V line and the checkered flag is distinctive color ring for sticker tightens the form. Chassis TT-02B of the shaft drive 4WD. Star dish wheel of CVA oil damper and fluorescent yellow of white-collar is attention.
★ total length 370mm. ★ TT-02B chassis use the bathtub frame that employs a high boat-shaped bottom of the skid effect. ★ built-in plastic Diff smooth differential to the front and back of the sealed gear case.

1/10 RC SUBARU IMPREZA MONTE-CARLO ’99 (TT-02 CHASSIS) (58631)
machine that showed active in the World Rally Championship in 1999 is the emergence in the electric RC car. Reproduce the form of force to realistic polycarbonate with a blister fender. Such as Subaru of Mutsure stars and bib was prepared by the sticker. TT-02 chassis is easy to handle shaft drive 4WD. In fin design wheel of gold color, it was fitted with a rally block tires.
★ total length 442mm. ★ tightens form a large rear wing and door mirror as a separate component. ★ TT-02 chassis is excellent in the steering stability by the great balanced design, easy to assemble, better maintainability.

1/10 RC TA07 PRO CHASSIS KIT (58636)
is the “TA” series long-awaited new appeared. In order to exert the optimum roll and pitch stiffness, characteristic composite type chassis is a combination of the upper frame to a narrow type of Lower Deck. Drive system is a highly efficient single belt 4WD. In addition, basic mounting position of the motor can be selected three places in the only re-adjustment of the belt tension, to accommodate a variety of course layouts and settings.
★ TRF419 legs around and around Giyadefu, steering Ackerman, adopted a servo mount of the type cantilever. ★ standard equipment high-performance parts such as TRF damper and universal shaft.

1/14 RC TEAM HAHN RACING MAN TGS (TT-01 TYPE-E CHASSIS) (58632)
participated in the 2016 season of racing track race to collect popular in Europe, he was to reproduce the TEAM HAHN RACING of the machine, which is expected. Trailer head body is divided into four parts made of polycarbonate. Side mirrors, couplers, front light is available in a different part of the molded article, a high sense of scale finish. Chassis has adopted the TT-01E easy to handle shaft drive 4WD.
★ total length 438mm. ★ tire outside diameter 70mm racing track-only in the new design. ★ Many of the sponsor logo provided by the sticker. ★ LED (sold separately) can be attached to the front and rear of the light case.

1/10 RC TRF419X CHASSIS KIT (42301)
pure racer, TRF419 was further evolution. Including the double deck of the carbon-made 2.15mm thickness Roy & 2.0mm upper, front and rear bulkhead, motor mount, change the materials and shapes, such as servo mount. Further use of the big bore damper and new rear upright of Super Short, by low and wide of the suspension mount, was more to stabilize the behavior during cornering.
★ including the carbon-made Upper Lower Deck, the front and rear aluminum bulkhead and aluminum motor mount is also specially designed. ★ will demonstrate easy traveling performance that corresponds to the wide range of situations.

1/10 RC M-05 Ver.II R CHASSIS KIT (84424)
is a race specification incorporating the OP parts to M-05 Ver.II. Adopts double cardan drive shaft designed for M chassis greatly reduces driving loss, ensuring traction by increasing the shock absorption performance in the TRF aluminum short dampers. In addition, to improve the cornering performance is equipped with upright for M-05Ra, was achieved even lighter using a lightweight aluminum battery holder.
★ aluminum parts and plastic parts are unified in virile black. ★ also consideration to ensure tightening and maintenance by the user, using a hexagon socket screw. ★ also equipped with stainless steel suspension shaft and low friction adjuster.

1/10 RC TB EVO. 6 MS CHASSIS KIT (84427)
latest model of the shaft drive 4WD is appeared. Suppressing the twisting of the chassis employs a double deck frame of aluminum 2mm thick Roy and carbon steel 2mm thick upper, corresponding to the high grip road surface such as carpet course. Motor is placed next to the left side, only by the aluminum center bulkhead of design enhances the support rigidity of the spur gear and Maitagiya, it is up reduction and durability of the shake.
★ and lightweight aluminum damper stays mount of specially designed, lightweight aluminum propeller shaft, also, such as aluminum big bore short damper equipment. ★ adopt an integrated stabilizer stopper.

1/10 XB MERCEDES-BENZ G 320 CABRIO (MF-01 X CHASSIS) (57898)
Mercedes-Benz G 320 will join the XB series of complete RC car. Polycarbonate body is silver, the hood is painted with texture some flat black, stitch also represented by a sticker. Chassis can enjoy the run not choose the road surface from on-road to Dart compact shaft drive 4WD, adopting the MF-01 X. RC mechanism has little worry of interference, is a 2.4GHz specification that there is no hassle of band exchange.
★ total length 389mm. ★ 7 to-spoke wheels, fitted with a hollow rubber tire tread pattern has been engraved. ★ wheel trigger type of transmitter, running for the 7.2V battery and charger is also set.

1/10 SCALE GLOW-ENGINE RC TG10-Mk.2 FN CHASSIS KIT (44053)
that 1/10 electric RC car enjoy the engine car in the body of a typical 190mm width is a new chassis based on the concept. 3mm thick duralumin Roy, to the shaft-driven 4WD chassis that employs a high-rigidity double deck frame of resin upper, Tamiya FS-12FN engine and a single mission of easy characteristic equipped. The suspension has been equipped with a CVA super mini to a narrow arm of the new development.
★ FS-12FN slide carburetor engine with a suction port of the tapered shape, die-cast heat sink head, equipped with a TM-4 muffler. In linear torque characteristics, also it features easy to adjust.

95266 Dash-5 Dancing Doll Premium (Super II Chassis)

69905 Modeler`s Knife (Optic Orange) (Hobby Tool)

74126 Hard Coat File Pro (Half Round, Width: 5mm)

44053 TG10-Mk.2 FN Chassis Kit
– It is a new chassis based on the concept that the 1/10 electric RC car enjoy the engine car in the body of a typical 190mm width.
– 3mm thick duralumin alloy, to the shaft-driven 4WD chassis that employs a high-rigidity double deck frame of resin upper, Tamiya FS-12FN engine and a single mission of easy characteristic equipped. The suspension has been equipped with a CVA super mini to a narrow arm of the new development.

58633 1/10 BLACKFOOT (2016)
58634 1/10 NSX 2016 (TT-02)
58635 1/10 MERCEDES BENZ G320 SILVER PAINTED (MF-01X)
58637 1/10 HONDA CIVIC SIR (EG6) (TT-02D)
84431 1/10 PORSCHE RSR TYPE 934 JAEGERMEISTER (TA02SW)
47321 1/10 PORSCHE 911 GT2 RACING

56039 1/16 JAGDPANZER LANG WITH OPTION KIT
56350 1/14 MAN TGX 18.54 (FRENCH BLUE)

R/C Models
58636　　1/10 R/C TA07 PRO Chassis Kit
42301　　1/10 R/C TRF419X Chassis Kit
84427　　1/10 R/C Chassis Kit TB Evo. 6 MS
57897　　1/10 XB Plasma Edge II (TT-02B)
57898　　1/10 XB Mercedes-Benz G 320 Cabrio (MF-01X)
54688　　Racing Wing Set 2 (Carbon Pattern)
54689　　TA07 Aluminum Ball Differential Set (37T)
54690　　TA07 Front Direct Coupling Set (37T)
54691　　TRF419 D Parts (Suspension Arms)
54692　　TRF419 E Parts (Rear Uprights)
56540　　Metal Air Horn Set for Tractor Truck
47314　　Touring Car Short Spring Set (Mica Blue)
84428　　TA07 PRO Titanium Screw Set
84429　　CC-01 Clamp Type Aluminum Wheel Hub

Scale Models
37023　　1/35 German Field Maintenance Team & Equipment Set

Kids
95093　　Raikiri (MA Chassis) Japan Cup 2016
15498　　HG Carbon Wide Front Plate (1.5mm)
15499　　HG Carbon Rear Wide Stay (1.5mm)

58636 TA07 PRO Chassis Kit

Highly efficient single belt drivetrain offers 3 motor positions, each with its own performance characteristics. Switching between them requires simple tension adjustments rather than exchanging belts.

★ This 4WD R/C touring car chassis assembly kit is endowed with a design influenced by data from the TRF (Tamiya Racing Factory) team’s top level racing activities.

★ It is based around a composite structure that consists of a narrow lower deck and an upper frame, and gives optimal torsional rigidity.

★ The highly efficient single belt drivetrain offers 3 motor positions.

★ Proven TRF419 suspension, gear differential units and steering components are joined by TRF dampers and universal shafts to make this chassis a hi-spec racer!

※Body, motor, tires, R/C equipment, battery pack and charger sold separately.

42301 TRF419X chassis kit

★ This is an updated version of the thoroughbred 2-belt 4WD racing chassis TRF419. Using the TRF419 double deck layout as a base, numerous components utilize new designs and/or material: carbon fiber lower (2.15mm thick) and upper (2mm thick) decks, bulkheads, motor mount and servo mount.

★ New super short big bore dampers combine with redesigned rear uprights for superior cornering stability.

※Body, motor, tires, wheels, pinion gear, R/C equipment, battery pack and charger sold separately.

84427 TB EVO.6 MS chassis kit

★ This high performance shaft-driven 4WD chassis has 2mm thick aluminum lower and carbon fiber upper decks, its double-deck frame giving controlled chassis flex on high-grip surfaces such as carpet.

★ The motor has a left-side mounting point, with a newly-designed aluminum center bulkhead that ensures spur and miter gears give long-lasting, smooth rotation.

※Body, motor, tires, wheels, pinion gear, R/C equipment, battery pack and charger sold separately.

47314 Touring Car Tuned Spring Set (Short Type) (Mica Blue)
47320 Aluminum Plate for Brush Motor
56540 Metal Air Horn Set (1/14 Truck)
54688 Racing Wing Set 2 (Carbon Pattern)
54689 TA07 Aluminum Ball Diff (37T) Set
54690 TA07 Front Direct Coupling (37T)
54691 TRF419 D Parts (Suspension Arms)
54692 TRF419 E Parts (Rear Upright)
84428 TA07 PRO Titanium Screw Set
84429 CC-01 Clamp Aluminum Wheel Hub

Shogakukan Colo Aniki in “Hyper Dash! Yonkuro” the draw Hiroyuki Takei teacher of design machine, new Burning Sun (tentative name) is also currently in development.

Tokuda Zaurus teacher of four wheel drive mini cartoon “Dash! Yonkuro” Dash No. 5 dancing doll that appeared in it is through a time of 27 years and welcomed its again.
As it is the appearance of yesteryear Dancing Doll, rigidity and scalability to adopt a high super 2 chassis. And resurrected as a premium machine that evolved running.