It can’t be said that we are not super fans of Porsche! Today, we OFFICIALLY announce an upcoming NEW release scheduled to be released in late October, the PORSCHE 956 Group C race car from 1982 in 1/10 scale.This ALL-NEW polycarbonate body mold is mounted on our easy to assemble ABS plastic bathtub chassis with space frame and FRP plate construction as seen in previous Group C models released over the years!

1/10 scale R/C model assembly kit. Length: 483mm, width: 207mm, height: 108mm. Wheelbase: 270mm.

The distinctive long-tail body, front and rear light cases, and wing are separately molded in polycarbonate.
Features black ABS plastic side mirrors and wing stays.

Based around an ABS plastic bathtub, with space frames front and rear and FRP plates, the chassis is a composite design that offers a rigid base to back up the fluid suspension: the result is a crisp, responsive driving experience.

The model is powered by a Sport-Tuned motor and uses a direct drive setup with spur and pinion gear mated to a ball pressure plate differential for smooth cornering performance.

Dish (front) and 5-spoke (rear) wheels are paired with high-grip sponge tires. (Wheels require painting.)
Includes 540 Sport Tuned brushed motor.

Required to complete: 2-channel radio, servo, ESC, 7.2volt battery with compatible charger, and Tamiya PS paints.

This is a collaboration Mini 4WD between NPB baseball team “Tokyo Yakult Swallows” and Tamiya. With the coloring of the molded parts, the sticker design, the logo printed on the side of the tire, and the original design package, this is a car that is full of appeal not only to Swallows fans but also to Mini 4WD fans.

Product name: “Mini 4WD Neo VQS Tokyo Yakult Swallows Collaboration Model”

Model details
A parts: VZ chassis… ABS Navy
P parts: Plastic bearings… PO Black
Body: Neo VQS… ABS White
Tires: Small diameter low-height tires (super hard type) Black with logo print
Wheels: Wheels for small diameter low-height tires (5 spokes) Red
Stickers: Silver foil paper
Gear ratio: 3.5:1
Motor included/Uses 2 AA batteries (sold separately)
Product dimensions: Total length 156 mm, total width 97 mm, total height 51 mm

*This product is sold by the Tokyo Yakult Swallows. Limited quantities are available at the team’s official goods shop and official online shop, and sales will end once stock runs out.

■Official Net Shop
https://shop.yakult-swallows.co.jp/products/19162
■Official Goods Shop
https://www.yakult-swallows.co.jp/pages/goods/shop

47514 ENEOS X PRIME GR Supra (TT-02 Chassis)

47326 TT-02R Chassis Kit (another batch of the 2016 kit)

This re-release version of the Super Astute 2WD buggy assembly kit features updates while keeping largely to the design of the original released in 1991. It features a 2.5mm thickness FRP chassis with low center of gravity, plus 4-wheel double wishbone suspension employing CVA oil dampers, while metal bearings in suspension and steering linkage give sharp steering response. The built-in TTC (Tamiya Traction Control) system protects gears from impacts and gives stable drive, even on low-grip surfaces, allowing full enjoyment of the off-road. An efficient 0.5 module gear is included. High-traction front rib-spike and rear square spike tires provide superb response and awesome cornering. The model comes with a durable and lightweight polycarbonate body and rear wing, plus a protective undercowl.

Introducing the TTC
The TTC (Tamiya Traction Control system) both protects internal gears from impact and limits wheelspin for a more stable drive. Setup is simple, and can be performed with the unit attached to the model, removing the cap on the gearbox cover then adjusting the lock nut position. 0.5 module pinion gear gives efficient drive and great acceleration.

Specifications
★Length: 379mm, width: 245mm, height: 150mm ★Wheelbase: 264mm　★Tread: 210mm (front), 203mm (rear) ★Tire width/diameter: 21/85mm (front), 41/82mm (rear) ★2.5mm FRP semi-double deck frame ★Rear-wheel 2WD ★Planetary gear differential ★Tamiya Traction Control (TTC) system ★3-piece steering tie-rod ★4-wheel independent double wishbone suspension with CVA short shock units (front) & CVA long shock units (rear) ★Gear Ratio = 8.49:1 (using kit-standard 0.5 module 25T pinion gear) ★Contact your local Tamiya Agent regarding the ESC.

Separately Required Items
★Motor ★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger