54755 TA07 Carbon Stiffener (Center)

Increase your setup options for the TA07 PRO chassis with this 2mm thick carbon fiber center stiffener. This lightweight and rigid part fits neatly onto the center brace and rear stiffeners for more rigidity and stiffer pitch damping.

54790 M-07 Concept Carbon Damper Stay Set (for TRF Short Dampers)

These 3mm carbon shock towers are designed to fit the M-07 M-Chassis. There are specifically designed to fit Tamiya’s SHORT TRF (Tamiya Racing Factory) damper sets. These damper stays allow you to achieve a lower center of gravity compared to using the stock plastic shock towers and are 2.5mm lower than the kit standard parts and the original carbon damper stay set, items 54761 and 54762 respectively.

This 1/35 scale model recreates the Goliath. It was a diminutive tracked vehicle about 1.5m long that could carry up to 60kg of light explosives and was remotely controlled via 3 cables that spooled out of its rear. Some 7,564 were produced in all, split between 12V battery and gas engine-powered variants. They were largely deployed by assault pioneer (Sturmpionier) units, and were hoped to give the advantage of surprise. They were used on all fronts including German counters to the allied invasions in Normandy.

This model assembly kit depicts the Korean War variant of the M4A3E8 “Easy Eight” Sherman. This kit variant includes new parts!
The Sherman – reliable and available in huge numbers – was a gamechanger for the Allies in WWII, and the Easy Eight a prevalent variant most notable for its horizontal volute spring suspension (HVSS) and smooth ride. The Easy Eight’s career did not end with WWII, however, as a number were refurbished and thrown back into action by a largely demobilized U.S. Army in the Korean War from 1950. They faced off against T34/85s operated by the Korean People’s Army with great success, and were later often used in a supporting fire role.

This 4WD R/C touring car chassis assembly kit takes the single belt-driven TA07 PRO and pairs it with a vast range of option parts, for a great racing setup right out of the box! In addition to a number of Hop-Up Option parts, it also has parts from the Tamiya Racing Factory Series and even a new low-friction drive belt made specially for this model.

About the TA-07
The TA-07 chassis racing kit is based around a composite structure that consists of a narrow lower deck and an upper frame. The part design layout provides the chassis optimal torsional rigidity which can be further adjusted by removing the frame center section. The highly efficient single belt drivetrain offers 3 motor position locations, each with its own performance characteristics suited to different tracks and setups. Proven TRF419 design suspension, gear differential units and steering components are combined with proven TRF aluminum shock dampers and universal shafts to make this chassis a hi-spec racer!

New parts included in this kit:
TA07R Low Friction Belt (White)
TA07R Linear Damper Springs

Included Hop-Up Options
TRF Big Bore Dampers
Full Ball Bearings
42216 44mm Double Cardan Joint Shaft (2pcs.) $82.00
42281 TRF418 Stabilizer Set (Front & Rear) $30.00
54704 TA07 Aluminum Steering Arm Set $24.50
54705 TA07 Aluminum Steering Bridge $15.50
54724 TA07 Aluminum Servo Mount $26.00
54690 TA07 Front Direct Coupling Set (37T) $22.50
54706 TA07 Aluminum Counter Pulley $7.75
54722 TA07 Aluminum Center Pulley (18T) $21.50
54725 TA07 Aluminum Motor Mount Posts $9.25
53509 Hard Fluorine Coated 0.6 Aluminum Pinion Gear (20T) $9.75
54720 TA07 Carbon Damper Stay (Front) $16.00
54721 TA07 Carbon Damper Stay (Rear) $18.00
53823 Clamp Type Aluminum Wheel Hub (5mm Thick) $27.00
53851 46mm Titanium Coated Suspension Shafts $11.00
53917 2.6mm Titanium Suspension Shaft – For Reversible Suspension $20.00
54568 TRF418 C Parts (Carbon Reinforced Front Uprights) $5.75
54580 Carbon Reinforced Hub Carrier (4˚) for Reversible Suspension Arms $9.25
54692 TRF419 E Parts (Rear Uprights) $7.00
54740 TA07 D Parts (Suspension Arms, Medium) $9.00
54070 TB-03 Aluminum Suspension Mount (1B) $15.00
54072 TB-03 Aluminum Suspension Mount (1D) $15.00
54172 TA05 Ver.II Separate Suspension Mounts (1A-1XA) $21.00
54173 TA05 Ver.II Separate Suspension Mounts (1B-1XB) $21.00
53827 Stabilizer Rod Stopper $9.00
54648 Fluorine Coated Stabilizer Ball Connector Set $7.50

$460.25 Retail Value!!

This is a special edition of the Grand Hauler. The R/C model assembly kit recreates a massive boxy, customized truck like those seen in North America. The special edition version is a great option for those without the time or confidence to apply a paint job to their kit, as the body, and other key body parts are pre-painted Metallic black (Tamiya Color TS-40). Additionally, a matte coating is applied over the metallic black which provides a cool look as seen in current trends in the automotive scene.

The model’s ladder frame chassis features aluminum side channels with resin cross members and is equipped with a highly realistic suspension utilizing metal leaf springs and friction dampers. A front-mounted motor and 3-speed transmission power the two rear wheel axles, which are fitted with built-in differentials to enable smooth cornering. A 4-channel R/C system and multi-function unit allow you to drive the vehicle and experience realistic lights, sounds and vibrations. (Both sold separately)

Tamiya 69919 Long Universal Arm Set – Clear

These versatile pieces have many uses such as constructing arms or other structural components. 3mm holes are allocated in 5mm intervals for various attachment applications. Being clear, they let you show off the workings of your construction project, and can be cut using a craft knife, painted, employed with LEDs and more!

Set Contents
•80mm x 80mm Cross Universal Arms x4
•Cross Crank Arms x2
•Brackets x2
•3mm Plastic Nuts x4
•3mm Spacers x4
•7mm Spacers x4
•3x10mm Screws x15
•3x20mm Screws x4
•3x25mm Screws x4
•3x12mm Tapping Screws x8
•3mm Nuts x
•3mm holes are interspersed at 5mm intervals along the center, and allow attachment of other arms, plates and gearboxes using push rivets. They can also fit 3mm LEDs.
•Recommended for use with other clear items such as Items 69906 & 69907 (plates), 69909-69912
•(gearboxes), 69915 & 69916 (wheels), and 69919 (long arms).

Tamiya 69920 Cross Universal Arm Set – Clear

These versatile pieces have many uses such as constructing arms or other structural components. 3mm holes are allocated in 5mm intervals for various attachment applications. Being clear, they let you show off the workings of your construction project, and can be cut using a craft knife, painted, employed with LEDs and more!

Set Contents
•80mm x 80mm Cross Universal Arms x4
•Cross Crank Arms x2
•Brackets x2
•3mm Plastic Nuts x4
•3mm Spacers x4
•7mm Spacers x4
•3x10mm Screws x15
•3x20mm Screws x4
•3x25mm Screws x4
•3x12mm Tapping Screws x8
•3mm Nuts x
•3mm holes are interspersed at 5mm intervals along the center, and allow attachment of other arms, plates and gearboxes using push rivets. They can also fit 3mm LEDs.
•Recommended for use with other clear items such as Items 69906 & 69907 (plates), 69909-69912 (gearboxes), 69915 & 69916 (wheels), and 69919 (long arms).