Mercedes-Benz Unimog 425 (CC-01)

Unimog 425 that appeared in 1974 in the tones and straight style is applied to the electric RC car series. Such as embedded bumper square cabin and square light, distinctive and reproduce the figure in real polycarbonate. Snorkel duct and door mirror I was prepared in separate parts. CC-01 of the shaft 4WD not anywhere chassis running. It was fitted with a block tire of strong tread pattern. 1/10 RC Car Series Nanba609
1 / 10Rc MERCEDES-BENZ UNIMOG 425 (CC-01 CHASSIS) (fifty-eight thousand six hundred and nine)
★ total length 368mm. ★ light case and the Benz emblem plating parts of the front and rear. ★ front double wishbone, is equipped with CVA oil dampers around the rear 4-link rigid legs.
May 30 around released
May 27 dispatch
1 included input number 6
18,000 yen
(excluding tax)

Toyota FJ Cruiser (CR-01)

the popular SUV, it was a combination of CR-01 chassis that enjoy rock crawling in the Toyota FJ Cruiser. Ladder frame is brilliant raster silver finish. Before and after the Def can easily lock and unlock using the hex wrench. Suspension 4-link rigid. Activates the oil damper in the push rod and rocker arm, it demonstrates the tremendous stroke and high traction. ★ RC limited
1 / 10Rc Toyota FJ CRUISER (CR-01 CHASSIS) (84 411)
★ total length 476mm. ★ the wheel of adopting the bead lock ring of plating finish, and fitted with Cliff crawler tire. ★ The light case it is possible LED mounting of Light (5φmm) (sold separately).
May 30 around released
May 27 dispatch
1 included input number 2
39,800 yen
(excluding tax)

TB-04 R chassis kit

drive-efficient shaft 4WD, it is the chassis kit with enhanced further the combat power of the TB-04. Up the rigidity of the major resin parts as made ​​of reinforced resin of carbon fiber blend. TRF419 the same shape of the front and rear suspension arms and upright, is around the foot using the aluminum suspension mounts and mounting the TRF big bore damper. The aluminum steering bridge and wiper I creating a direct operability. ★ RC limited
1 / 10Rc TB-04R CHASSIS KIT (eighty-four thousand four hundred and twelve)
★ drive system front-direct, the configuration of the rear Giyadefu. ★ lightweight aluminum propeller shaft, pilot shaft, was to reduce the loss by adopting the mission shaft.
May 23 around released
May 20 dispatch
1 included input number 4
49,800 yen
(excluding tax)

RC Buggy Kumamonbajon (DT-02)

popular bear RC car 2nd buggy style topped Mon driver. I put the doll of “Kumamon” to the two-wheel drive buggy you do not choose a place to run from on-road to off-road. Rode in the driver’s seat and hold the handle doll of “Kumamon” is set in the pre-painted completed state. 380 types of motors tractable power characteristics which is mounted on the vehicle body rear portion. Body impact styrene resin that can be painted. ★ 1/10 electric RC Car Series Nanba615
1 / 10Rc RC BUGGY Kumamon Version (DT-02 CHASSIS) (fifty-eight thousand six hundred fifteen)
★ total length 390mm. ★ Kumamon and tomatoes, such as watermelon illustrations, liven up the fun stickers also rich set. ★ You can also enjoy the built in performance up the optional parts sold separately.
June 20 around released
June 17 dispatch
1 included input number 6
9,800 yen
(excluding tax)

TRF211XM chassis kit

is 2WD pure racing buggy for the top drivers. High-strength, adopting a lightweight resin Rowadekki that were molded excellent material with high impact resistance in a special recipe. Rigidity and bending, to balance the stickiness at a high level, and demonstrate a stable running on any road surface. In addition, the rigidity of the rear by combining Riyasutefuna and battery Steph toner. Equipped with a big bore aeration damper around the foot. ★ TRF Series No.188
1 / 10Rc TRF211XM CHASSIS KIT (forty-two thousand two hundred eighty-eight)
★ aluminum gear box. To prepare a ball differential and Giyadefu. ★ low profile servo is used, straight pack battery also can be mounted. ★ polycarbonate lightweight body and with the rear wing.
June 20 around released
June 17 dispatch
1 included input number 2
66,800 yen
(excluding tax)

Suzuki Jimny (JB23) (MF-01X)

is a Brand New models of compact M chassis size that adopts the shaft drive 4WD appeared. The main frame is divided into three parts monocoque, which is integrated to the gear box. Is placed next to the battery in the center of the vehicle body, it is equipped with a motor in the rear end. Double wishbone independent suspension, and fitted with a rally block tires for touring car. Body was chose Suzuki Jimny (JB23 type). ★ 1/10 electric RC Car Series Nanba614
1 / 10Rc SUZUKI JIMNY (JB23) (MF-01X CHASSIS) (58614)
★ total length 347mm. ★ shaft 4WD chassis that ran enjoy it anywhere. ★ replace the central block of the frame, by combining the propeller shaft optional, three wheelbase are selectable.
June 27 around released
June 24 dispatch
1 included input number 6
13,800 yen
(excluding tax)

Porsche 911 GT2 racing (TA02SW)

commercially available racing machine that was active in the world of racing, Porsche 911 GT2 appeared in the RC. Reproduce the glamorous form equipped with over fender to Real in polycarbonate. High-mount type of large rear wing and engine hood, door mirror was prepared in separate parts. Chassis TA02SW of the shaft drive 4WD. A wheelbase shorter (236mm) is a wide tread specification set ★ RC limited
1 / 10Rc PORSCHE 911 GT2 RACING (TA02SW CHASSIS) (84399)
★ total length 442mm. ★ in two different piece of mesh wheel width before and after, and fitted with slick tires. A built-in differential gear before and after the sealed gear case ★, rear has adopted a ball differential.
June 27 around released
June 24 dispatch
1 included input number 6
17,800 yen
(excluding tax)

TRF102 chassis kit

is 2WD Formula chassis to fight the high-end race. Is equipped with a roll point ball and pitching shaft, it is adopted T bar type rear suspension that the roll and pitch can be completely independently control each. It will deliver outstanding following property to a road surface. Furthermore, the floating mounting of the traction battery. Rowadekki of bending the taking advantage to the maximum and produces handling a sense of stability. ★ TRF Series No.189
1 / 10Rc TRF102 CHASSIS KIT (42289)
★ front suspension is independent left and right of the kingpin coil spring. ★ steering servo uses a carbon-made bridge and aluminum servo mount, and then securely fixed by screws.
June 27 around released
June 24 dispatch
1 included input number 4
38,800 yen
(excluding tax)

TT-02D TYPE-S drift spec chassis kit TT-02D TYPE-S drift spec chassis kit

based on the TT-02 TYPE-S, we were subjected to the tuning for the thrilling drift. Black color to fearless 5-spoke wheel, set the plastic drift dedicated tire of 24mm width. Around the foot which adopted the reversible suspension arm, using the turnbuckle shaft to the upper arm. 3mm thickness to set the CVA oil damper on FRP damper stay, and fitted with a soft type of spring. ★ RC Special
1 / 10Rc TT-02D TYPE-S DRIFT SPEC CHASSIS KIT (47,301)
★ reduce the drive loss with aluminum propeller shaft and aluminum propeller joint. ★ aluminum motor heat sink is also equipped with the torque-Tuned Motor. ★ drive system full bearing specifications.
JulyRelease

1 included input number 4

NISSAN GT-R LM NISMO LAUNCH VERSION (F103GT) NISSAN GT-R LM NISMO LAUNCH VERSION (F103GT)

this year, innovative machine NISSAN GT-R LM NISMO of NISSAN to return to Le Mans 24-hour race first time in 16 years. The launch version (development vehicle) is appeared in the early as RC car. Low elongated body, ultra-long nose, raised front and rear fenders, and reproduce the distinctive appearance, such as shark fin to feel plenty of polycarbonate. Chassis has adopted the F103GT of direct drive 2WD. ★ 1/10 electric RC Car Series Nanba617
1 / 10Rc NISSAN GT-R LM NISMO LAUNCH VERSION (F103GT CHASSIS) (58617)
★ total length 426mm. ★ foot around the left and right independent front has used the link type suspension arm, rigid type rear is using the FRP T bar. ★ is equipped with a hollow rubber super slick tire.
JulyRelease

1 included input number 4

TT-02B MS TT-02B MS

is MS specification that enhances the driving performance of the popular TT-02B chassis as shaft drive 4WD buggy. Aluminum propeller shaft and propeller joint, in addition to the equipment of the metal drive shaft, to improve the driving efficiency as a full bearing specifications. Suspension equipped with FRP made ​​damper stay and the adjuster rod. Such as straight-line stability and cornering characteristics to the superior aluminum rear upright was also set. ★ RC limited
1 / 10Rc TT-02B MS (eighty-four thousand four hundred eighteen)
★ total length 380mm. ★ futuristic form is body and with the rear wing of the charm of dual ridge. ★ an image of TRF machine, we’ve set a special sticker that finished in MS color.
JulyRelease

1 included input number 4

Preassembled New entry RC car running in batteries (name TBD) Preassembled New entry RC Car (name TBD) running on batteries

was four AA batteries to power source, all-in-one of the completed RC buggy is the new appearance. Brand New chassis buggy type of rear-wheel drive. 4-wheel strut suspension is a simple structure. The rear end it was equipped with a 370 type motor of easy to control characteristics. ESC and also unit with integrated receiver of 2.4GHz specification newly developed, can accommodate from 4.8V to 7.2V.

★ completed RC car of a full-length 282mm. The transmitter wheel type. ★ familiar Nezu Kota Mr. responsible for the design of polycarbonate body mini four-wheel drive. ★ steering servo using a 1/10 size.
JulyRelease

1 included input number 2

XB Volkswagen Scirocco GT (TT-01D TYPE-E) drift spec

appeared in Volkswagen’s three-door hatchback coupe, the machine that reproduces the racing type of sirocco XB. Reproduce the dauntless form of wide and low to the real in polycarbonate. Chassis adopts the TT-01D TYPE-E of the shaft 4WD. Tuning for drift is decorated, equipped with RS-540 Sport Tuned Motor, it is fitted with a plastic tire of 24mm width. You can enjoy a thrilling drift. ★ 1 / 10RC Expert Built Series No.183
1 / 10Rc XB VOLKSWAGEN SCIROCCO GT (TT-01D TYPE-E CHASSIS) DRIFT SPEC (fifty-seven thousand eight hundred eighty-three)
★ total length 443mm. ★ without the need for band adjustment, adopting the 2.4G propoxycarbonyl to enjoy feel free to travel at more than one. ★ wheel trigger type of transmitter, the traction battery, and I was set charger.
May 30 around released
May 27 dispatch
1 included input number 2
26,800 yen
(excluding tax)

XB RC Buggy Kumamonbajon (DT-02) XB RC Buggy Kumamonbajon (DT-02)

This is a complete electric radio control car that was carrying a doll of “Kumamon” from on-road to the two-wheel drive buggy you do not choose a place to run to off-road. Doll was riding in the driver’s seat and hold the handle “Kumamon” was set in the pre-painted completed state. Because it is two-wheel drive buggy lightly simple structure, you can enjoy peppy ride. In addition, performance-up is also possible incorporate the optional parts sold separately. ★ 1 / 10RC Expert Built Series Nanba184 ~ 187
1 / 10Rc XB RC BUGGY Kumamon Version (DT-02 CHASSIS) (57884 ~ 57887)
★ total length 390mm. ★ red, black, green, and providing a body color of the four colors of yellow. ★ RC mechanism adopted 2.4GHz. ★ wheel type of transmitter adopted the grip cover and trigger cover.
JulyReleased

yen each 22,800
(excluding tax)

Raikiri GT (TG10-Mk.2 FZ) Raikiri GT (TG10-Mk.2 FZ)

and a top speed of growth, exhaust sound that plays a high tone is to TG10-Mk.2FZ chassis of charm, has combined the body of the original design. Body that combines the styling and aerodynamic effects, which become familiar Nezu Kota’s hand in the four wheel drive mini. The overall form that stance low to wide, sharp headlights create a fearless look, is before and after the fender features protruding. ★ 1/10 engine RC Car Series No.52
1 / 10Rc raikiri GT (TG10-Mk.2 FZ CHASSIS) (44,052)
★ total length 430mm. ★ duralumin Roi, with a Tamiya FS-12FZ engine and two-speed mission of the amount of exhaust 2.1cc a double deck frame of the resin upper to adopt the shaft 4WD chassis.
JuneRelease

1 included input number 2

Hop up Opushonzu
OP.1632 TT-02 TYPE-S carbon damper stay (front) … May released 1,500 yen (Excluding tax)
OP.1633 TT-02 TYPE-S carbon damper stay (rear) … May released 1,600 yen (Excluding tax)
OP.1634 TT-02 TYPE-S steel suspension mount set … May released 3,300 yen (Excluding tax)
OP.1635 aluminum camber gauge (stick-type) … May released 2,100 yen (Excluding tax)
OP.1636 TT-02 TYPE-S steel suspension mount (front) … June release 1,200 yen (Excluding tax)
OP.1637 TT-02 TYPE-S steel suspension mount (rear) … June release 1,200 yen (Excluding tax)
OP.1638 TT-02 TYPE-S Steel rebound stopper (two) … June release 1,300 yen (Excluding tax)
OP.1643 MF-01X full bearing set … June release 3,000 yen (Excluding tax)
OP.1644 GF-01 aluminum down mount servo guard … June release 1,800 yen (Excluding tax)

RC limited parts
TB-04 R titanium screw set … May released 6,600 yen (Excluding tax)
M-05 Blue carbon damper stay (front) … May released 1,100 yen (Excluding tax)
M-05 Blue carbon damper stay (rear) … May released 1,400 yen (Excluding tax)
TRF102 titanium screw set … June release 3,900 yen (Excluding tax)

TRF Series parts and equipment
Aluminum parts tray … May released 2,800 yen (Excluding tax)
TRF419 aluminum Lower deck (2.0mm thick) … July released 7,800 yen (Excluding tax)

Body parts for engines Car
SP.1578 Raikiri GT (wide) Spare Body Set … July released

Hop up Opushonzu (for engine car)
OP.1641 option wing set for engine car body … July released