Shipping will be postponed due to production reasons from 11th December (in Japan) to a new, still undecided date, we will post new infos when they are available.

58584 1/10 RC TT-02D Drift Spec Chassis Kit
TT-02 drift tuned chassis kit!
Good balance to the left battery, was laid out in portrait orientation to the right motor driving stability by design, by the left and right common review and number of parts, and set beginners new standard with high maintainability and ease of freshly see TT-02. The finish on the properties it is easy to drift based on this chassis chassis Kit has appeared as early. Combined with plated mesh wheel in addition to the drift tires were combined, full ball bearings, sport motor, CVA oil dampers. A as a new design further strengthening to match the drift motor heat sink, powerful plastic parts were also standard equipment. Blue, block the battery holder also visually and silver plated brake disk type wheel hub.
TT-02D standard parts
★ OP.1476 TT-02 full bearing set
★ SP.746 CVA Damper Super Mini × 2
★ OP.1020 super drift tire (24mm width) × 2
★ OP.1571 TT-02 Aluminum Motor Heat Sink (Released in February)
★ Reinforced resin type TT-02 A parts × 2
★ OP.68 RS-540 Sport Tuned Motor

58588 1/10 RC Toyota FJ Cruiser (CC-01 chassis)
Popular in an individual style reflecting the image of a great car Land Cruiser FJ40 Toyota FJ Cruiser appeared in the CC-01 chassis!
Launched as a private vehicle in North America in 2006 , to hold the deep-rooted fan is released in Japan in 2010 Toyota FJ Cruiser. It has the image of a great car Land Cruiser FJ40 that has been loved all over the world, front down cormorant oval grille and round headlights, fender it leaves paste has been reproduced the very best in polycarbonate design. Cross-country chassis CC-01 that employs a full-time 4WD. The suspension, front double wishbone type, lower H arm , rear adopt guide, CVA oil dampers of four excellent shock absorbency. Rear axle within can also be assembled to lock specification, high drivability on rough path fun of control. It is possible to be equipped with LED lights (sold separately) to the front and rear.

58585 1/10 RC RC Alfa Romeo 155 V6 TI Jagermeister (TT-02 chassis)
57870 1/10 XB RC Alfa Romeo 155 V6 TI Jagermeister (TT-01 chassis TYPE-E)
To take advantage Entries 1994 German Touring Car Championship (DTM) among Alfa Romeo 155V6TI that showed the thermocline and mode for a long time
relationship with Star sports deep brewing maker Jaegermeister became the main sponsor, the 1/10RC car appears. Leave the image of commercial vehicles on the front grille slightly , sky form of the force that is significantly modify the power, the thin mark of deer bol character sponsor characteristic
stickers also realistic. The assembly in the assembly kit and maintenance is a simple, driving performance is enough shaft dry by adopting the TT-02 4WD chassis.

Please note that all information is tentative until officially confirmed from Tamiya, INC. and no responsibility is taken for the correctness of this information.

Static
32577 1/35 Soviet 1.5t Cargo Truck 1941
35366 1/35 Ford G.P.A.
37015 Horch Kfz 15

RC
54554 OP1554 Lock block Tire & 2 piece 5-spoke wheels (CC-01)
54555 OP1555 TT-02 FRP battery plate and transponder Stay Set
54556 OP1556 TT-02B FRP front Damper Stay Set
54557 OP1557 TT-02B FRP Rear Damper Stay Set
54559 OP1559 TT-02 Low Friction Suspension Ball (4pcs.)
54571 OP1571 TT-02 Aluminum Motor Heat Sink)
54574 OP1574 TT-02 Aluminum Racing Steering Set
54575 OP1575 TT-02 Aluminum steering bridge

Mini 4WD
15472 GP472 FRP front Wide Stay (for Fully Cowled Mini 4WD)
15473 GP473 Aluminium Spacer Set (12/6.7/6/3/1.5mm)
15474 GP474 Mini 4WD Catcher (Mini 4WD)
18080 Bear Hawks RS (Super II Chassis)
18081 Daihatsu Copen RMZ (VS Chassis)
18082 Daihatsu Copen XMZ (Super II Chassis)
18637 Festa Jaunes (MA Chassis)
19438 Ray Stinger Premium (Super II Chassis)
95003 Boomerang RS Black Special (VS Chassis)
95004 HG AR Chassis Carbon Front Wide stay (2mm/Blue Lame)
95005 HG AR Chassis Carbon Rear Wide stay (2mm/Blue Lame)
95007 HG Carbon Multi Reinforced Plate for 13/19mm Roller (2mm/Blue Lame)
95013 Mantaray Mk.II Clear Body Set II (Mini 4WD Limited)
95014 Neo Falcon Clear Body Set II (Mini 4WD Limited) (Mini 4WD)

Tools
74117 Tweezers to bend (for Etching Parts)
87153 HG Precision Brush Ultra-Super Slight
87154 HG Precision Brush Super Slight
87155 HG Precision Brush Slight
87156 HG Precision Brush Small
87157 HG Precision Brush Super Small
87158 HG Precision Brush Small
87159 HG Precision Brush Middle

Please note that all information is tentative until officially confirmed from Tamiya, INC. and no responsibility is taken for the correctness of this information.

Static
12655 1/6 Harley-Davidson Fat Boy Lo Detail Up Parts Set
25167 1/48 Mitsubishi A6M5 Zero Fighter Model 52
25168 1/72 Mitsubishi A6M5 Zero Fighter Model 52
25169 1/72 Mitsubishi A6M3 Zero Fighter Model 21

RC
51541 GAZOO Racing TRD 86 Spare Body
84372 1/10 RC Avante 2001 Body Parts Set
84374 TRF201X Lightweight Body

51557 TRF418 Spur Gear (116T)
51558 TRF418 Front Belt (169T)
51559 TRF418 Rear Belt (63T)

54550 TT-02 Low Friction 3x18mm stepped bis (2 pcs.)
54551 6 spoke two-piece wheel (2pcs.) (26mm width +2) (Red Plating)
54552 6 spoke two-piece wheel (2pcs.) (26mm width +4) (Red Plating)
54553 6 spoke two-piece wheel (2pcs.) (26mm width +6) (Red Plating)
54558 TT-02 Aluminumnum Motor Mount
54568 TRF418 C Parts (Carbon Reinforcement Front Up Light)
54569 TRF418 D Parts (Carbon Reinforcement Suspension Arms)
54570 TRF418 E Parts (Carbon Rear Up Light)

42261 TRF 04 Hard coat Aluminum Pinion Gear (31T)
42262 TRF 04 Hard coat Aluminum Pinion Gear (32T)
42263 TRF 04 Hard coat Aluminum Pinion Gear (33T)
42264 TRF 04 Hard coat Aluminum Pinion Gear (34T)
42265 TRF 04 Hard coat Aluminum Pinion Gear (35T)
42266 TRF 04 Hard coat Aluminum Pinion Gear (36T)
42267 TRF 04 Hard coat Aluminum Pinion Gear (37T)
42268 TRF 04 Hard coat Aluminum Pinion Gear (38T)
42269 TRF 04 Hard coat Aluminum Pinion Gear (39T)
42272 TRF Short Damper HL Cylinder (2pcs.)
42273 TRF Short Damper (Black hard coat) (4pcs.)

Mini 4WD
18062 Vanquish RS (VS Chassis)
94823 Mini 4WD HG Aluminumnum Setting Board
94859 13mm All Aluminumnum Bearing Roller (Blue)
94860 13mm All Aluminumnum Bearing Roller (Red)
95006 Blade Wait (Silver) w/FRP Multi Roller Setting Stay

Please note that all information is tentative until officially confirmed from Tamiya, INC. and no responsibility is taken for the correctness of this information.