Description:
15 years of Tamico!
We would like to celebrate this small but beautiful anniversary together with you.
And that with a very special anniversary model.
The “Tamiya Dancing Rider Custom Speed Delivery 15 Years TAMICO Limited Edition Kit”.
As the name suggests, this “Dancing Rider” really has it all.
The kit is based on a normal Dancing Rider kit.

But our “Limited Edition” comes with the following very special parts. The “highlight” is immediately noticeable. Instead of the clear and unpainted body, the kit now includes a pre-cut and actually really “chromed” body.
Instead of the original white rims of the Dancing Rider, our kit comes with the special Tamiya 54913/14 rims in neon orange.

But probably the most exclusive part of the “Dancing Rider Speed Delivery” are the included decals. These were exclusively created by us, and give the model the unique ultimate “Speed Delivery Look”. Detailed instructions for these decals in Tamiya quality are included in every kit. So that nothing goes wrong when decaling the model. The model is strictly limited to only 333 pieces. Each individual kit is exclusively numbered for this purpose.

Technical details:
– 1/8 scale kit model
– New 3-wheel chassis with rear engine and front-mounted battery pack
– Front and rear parts are connected and movable for steering movements
Stabilising arms on the sides
– Newly designed body

Scope of delivery:
– Kit model
– detailed illustrated assembly instructions
– 370cc electric motor
– newly designed “Speed Delivery” decals

Required accessories:
– 2-channel remote control with steering servo
– battery pack
– Electronic speed controller
– Charger for drive battery

Attention! Please note:
The model is limited to two pieces per customer.
The numbered kits will be shipped in the order in which the orders are received. Therefore, desired numbers cannot be taken into account.
If you would like to have a low serial number, we therefore recommend that you order quickly.
We ask for your understanding.

*The size of the course when expanded is 216 x 120 cm. The course length is approximately 10m for two laps.

Ready-to-play circuit with 2 Mini 4WD cars
This set includes a 2-lane Mini 4WD official course, an oval home circuit with 3-dimensional lane change, and 2 machines. The great thing about this is that you can start playing right away once you have assembled the course and completed your mini 4WD. The course is a special color with black corners and sky blue straights and lane changes. The two mini 4WDs we chose were Chevallia and Estura. I’m looking forward to not only racing with family and friends, but also trying time attacks.

Circuit basic specifications
● Size of combined course: 216cm x 120cm ● Course width: 11.5cm ● Fence height: 5cm ● Course length: Approximately 10m for 2 laps ● Stickers to put on the course included ● Assembling/disassembling Easy to fit in type

Required separately
4 AA batteries for running (for 2 machines)

The F-35 Lightning is a multi-role fighter that was developed based on a plan to consolidate various tactical aircraft operated by the U.S. Air Force, Navy, and Marine Corps into one type of aircraft and its derivatives, and began deployment in 2011. II. Among the three types of F-35 developed, the F-35B for the Marine Corps is capable of short takeoff/vertical landing (STOVL) with a rotating engine duct nozzle and lift fan. In addition, it features a weapon bay that allows weapons to be stored within the fuselage, radar wave absorption technology, etc., and combines high-speed performance with a maximum speed of Mach 1.6 and excellent stealth. Following the US, UK, and Italy, Japan’s Air Self-Defense Force also decided to introduce the F-35B in August 2019. As the world’s first supersonic STOVL aircraft, it is expected to demonstrate high responsiveness.
“1/48 F-35A Lightning II” released in December last year. The 5th generation state-of-the-art stealth fighter achieved a high level of reproducibility down to the details, from the fuselage shape to the details, and achieved a clear component configuration and exhilarating assembly through unitization, which created a great response. Inheriting this feature, we have already modeled the short takeoff/vertical landing stealth fighter “F-35B”, which is the most ambitious aircraft in the F-35 series. We approach its true form on a 1/48 scale.

(No photo from the updated 2024 version yet)

Tamiya welcomes the updated re-release of the 4WD buggy Hotshot II, the original of which was first produced in 1987, after Tamiya’s first 4WD buggy, item 58047 Hotshot, released in 1985 and item 58054 Supershot released in 1986.
The Hotshot II was a lightweight design due to the use of plastic parts.
Model information:
– R/C model assembly kit in 1/10 scale. Length: 390mm, width: 235mm, height: 160mm.
– All-wheel drive with shaft drive guarantees off-road speed and stability even in the trickiest corners.
– The 4-wheel independent double wishbone suspension uses CVA (II) oil dampers (one for the front and two for the rear) with front stabiliser to get the most out of the 4WD traction.
– The body and rear wing are made of lightweight polycarbonate (0.7 mm thick) and use a colour combination with orange lines on a black base.
The polycarbonate bodywork is pre-cut and pre-painted in black.
– The front and rear mechanical shells are sealed to keep out dirt and sand and contain differentials for smooth curves.
– Sections such as the ABS monocoque frame and suspension arms are made of reinforced plastic for durability.
– Hybrid ‘semi-pneumatic’ tyres with oval pins and spikes are matched to large-diameter nylon rims.
– Includes updated sticker set.
R/C system sold separately.

The Alfa Romeo Giulia Sprint GTA Club Racer makes an appearance on the new and versatile MB-01 chassis platform. This time around the MB-01 is configured to be the middle wheelbase with midship rear motor/rear wheel drive (MR) specification. The Alfa Romeo Giulia Sprint GTA was developed as the lightweight, tuned race version of the 2-door coupe Giulia Sprint GT and released in 1965. 500 units were produced and in the late 1960s the works car became class champion several times in the European Touring Car Championship; also run by other racing teams, it caught a lot of attention at the racetrack!

The MB-01 Chassis
The compact, 2WD MB-01 chassis gives a choice of three types of wheelbases, and front- or rear- wheel drive system. This model employs a midship motor, rear-wheel drive setup. Without removing battery pack, motor, and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; low or high motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance.

• 1/10 scale R/C model assembly kit. Length: 385mm, width: 167mm, height: 132mm. Wheelbase: 225mm (Middle wheelbase).
• The form of the Alfa Romeo Giulia Sprint GTA Club Racer is recreated in lightweight polycarbonate.
• Features 60mm front and rear tires.
• This kit includes livery stickers to create a design inspired by the numerous amateur club racers.
• Includes 540-Type brushed motor and ESC.
• Required to complete: 2-channel radio, steering servo, 7.2-7.4volt battery with compatible charger, and Tamiya PS paint.

47492 Fiat Abarth 1000TCR BC Blue Gray Painted Body (MB-01 chassis)
47495 2003 Ford Focus RS Custom Painted Body (TT-02 chassis)


58731 Mercedes-Benz CLK-GTR 1997 (TC-01 chassis)

The Mercedes-Benz CLK-GTR R/C car kit first made its appearance in the Tamiya product catalog in 1998 on the popular TA-03R chassis platform then later the easy to assemble TT-01E platform. The CLK-GTR has made a return this time on our high-performance TC-01 chassis platform, which is destined to provide the most performance yet as it takes advantage of the Mercedes sleek body profile and the low center of gravity of the TC-01!

TC-01: Seriously Low-Profile
This durable composite monocoque-frame chassis provides shaft driven 4WD from a central motor via front and rear propeller shafts, with oil filled gear differentials. 4-wheel independent double wishbone suspension employs long arms, plus inboard setups front and rear with oil shock-dampers actuated by push rods and rocker arms to allow the use of low-profile bodies. Adjust spacer width to easily alter camber, skid, and toe angle settings. Both suspension arms and uprights are identical left, right, front and rear, for more efficient maintenance and pit work.

• 1/10 scale R/C model assembly kit. Length: 470mm, width: 194mm. Wheelbase: 257mm.
• 1997 Mercedes-Benz CLK-GTR is recreated in lightweight and durable polycarbonate.
• Separately molded white ABS plastic parts recreate side mirrors and rear wing.
• Silver mesh wheels are paired with racing slick tires. (The rear wheels are wide tread.)
• TC-01 chassis
• The durable and composite monocoque-frame chassis provides shaft driven 4WD from a central motor via front and rear propeller shafts, with oil filled gear differentials.
• 4-wheel independent double wishbone suspension employs A-shaped long arms, plus inboard setups front and rear with oil dampers actuated by push rods and rocker arms.
• Use spacers and shims to easily alter camber, skid, and toe angle settings.
• Both suspension arms and uprights are identical left, right, front and rear, for more efficient pit work.
• Rear transverse battery position is also compatible with 139x47x25mm square-shaped battery packs.
• Required to complete: 2-channel radio, LOW-PROFILE steering servo, (Note: Standard Size Servos cannot be used), motor, ESC, 7.2-7.4volt battery with compatible battery charger, and Tamiya PS paint.