Tamiya 58661 Buggyra Fat Fox (TT-01E)

Tamiya 58661 Buggyra Fat Fox (TT-01E) – Tentative photo

Tamiya 58660 1/18 R/C Dynahead 6×6 (G6-01TR)

Tamiya is delighted to announce the latest 6-wheeled beast in our line-up, the Dynahead 6×6, which takes inspiration from the big trucks used in the gruelling off mad world of truck trials. It appears on a new chassis variant named the G6-01TR, based upon the G6-01, with hub reduction axles providing extra height for taking on rougher terrain. With a stylish body penned by self-proclaimed “hyper designer” Takayuki Yamazaki from Japan, (Dual Ridge, etc.) it is sure to be a fun addition to your R/C garage!
• This is a 1/18 scale 6WD R/C model assembly kit.
• Length: 453mm, width: 244mm, height: 232mm. Wheelbase: 173+126mm.
• The cab-over truck body is a brand new design by Takayuki Yamazaki.
• Hub reduction axles raise ground clearance by 15mm; in conjunction with the traction provided by a 37.35:1 gear ratio (with kit-included 18T pinion), the Dynahead 6×6 has awesome off-road and crawling capability!
• 5-spoke wheels are paired with V-tread block tires (Item 53854) for superlative bite.
• With suspension reassembly and a separately-sold transmitter with 4WS function and R/C equipment, the rear wheels can be made steerable.

The Super Astute (2018) is a reissue of a classic (58097, 1991).
The 2WD Buggy undergoes only minimal technical changes in the new edition to do justice to the performance of contemporary electronics. The famous TTC (Tamiya Traction Control) has been retained in a revised form, the appearance is as close as possible to the original.

Technical specifications

• Kit in scale 1/10, 2WD offroad race buggy
• Lowerdeck FRP with 2.5mm material thickness.
• The battery compartment has been slightly enlarged. Not compatible with square shape battery packs.
• 4 Independent suspension on double wishbones, with CVA oil shock absorbers.
• Closed gearbox with TTC (Tamiya Traction Control) system. This first slipping clutch from Tamiya has been reworked and is adjustable from the outside directly under the cover.
• Gear in size module 0.5 installed.
• A low-profile servo is required for steering.
• Efficient rib/spike tyres (front) and square spikes (rear) provide the necessary grip.
• Bodywork / spoiler as well as underbody protection made of polycarbonate for self-designing included.
• Motor and speed controller not included.

The original Grasshopper needs little introduction. It was a Tamiya legend which inspired legions of fans since the 1980s. For many, it was their very first introduction into the world of radio control assembly kits. The original Grasshopper is still among Tamiya’s best-selling kits to this day. Now the legend is re-imagined as the Comical Grasshopper, with a new body inspired by the famous original. The re-imagined body sits on a new and dedicated variant of the proven off-road chassis: the WR-02CB.

• 1/10 scale R/C model assembly kit. Length: 356mm, width: 244mm. Wheelbase: 170mm.
• Superb performance both on- and off-road.
• Durable monocoque centerpiece and inline battery pack position, 4-wheel double wishbone suspension and 2-piece steering tie-rod set up.
• Polycarbonate body.
• Sticker design based on the original Grasshopper.
• Includes headlight cases, allowing installation of separately sold 5mm LEDs. They use separate polycarbonate lens components.
• Driver figure included.
• Suspension arms feature multiple damper attachment holes for easily adjustable performance.
• New 2-piece wheels molded in durable ABS.
• New tire design, with rib pattern front and block pattern rear.
• Oil-filled CVA Mini shock units provide superb cushioning, even on rough off-road surfaces.
• Includes Tamiya TBLE-02S ESC (electronic speed control) Capable of running sensor brushless motors and brushed motors alike. (21.5 Turn BL motor limit) (23 Turn brushed motor limit)
• Includes 540-type brushed motor.
• Requires: 2-channel radio, steering servo, 7.2-volt battery pack & charger, and Tamiya PS/TS paint. NOTE: Must use round type battery pack. Square shaped batteries will not fit battery compartment.

The TA07 PRO, is a very popular chassis kit among club racers across the world and one of the most popular machines to use for the Tamiya Championship Series. This version of the platform has been given a significant overhaul endowing it with even greater potential! It is infused with parts designs and concepts from the top-level TRF419XR chassis to create a beast on the racetrack!

• 1/10 scale R/C chassis assembly kit.
• 2.25mm carbon fiber lower deck paired with a 2mm thickness dual bridge-type vertical frame.
• Aluminum bulkheads.
• Retains the 3 selectable motor positions from the TA07 PRO, giving total control over drivetrain setup.
• Features the proven TRF419XR suspension setup, with TRF super short big bore dampers.
• Drive belts and differentials are mounted approximately 2mm lower than standard TA-07 Pro/R for great traction under acceleration.
• New 20T center pulley ensures minimal belt tension yet a highly smooth drive. Standard TA-07 comes equipped with 18T center pulley.
• Final internal drive ratio: 1.85 (TA-07 Pro/R: 2.05)
• Motor position is 1mm toward the chassis center for optimal balance.
• Damper stays for use with standard TRF dampers included.
• Ball-Bearing sway bar mounting system for precise tuning.
• Requires: 2-Channel radio, steering servo, ESC, motor, 7.2-7.4 battery with charger, tires & 190mm body set.