Category Archives: Tamiya Company

The crisis of plastic model industry

By Nakamura Takahito of Response emerging media

At the “57th Shizuoka Hobby Show” held at Twin Messe in Shizuoka for the four days from 10th to 13th May, a press conference was held where the leaders of manufacturers gathered.

At the beginning, Shizuoka model teaching cooperative representative, Mr. Shunsaku Tamiya, president of Tamiya model, talked about the current state of the model industry. To my surprise, as far as the plastic model is concerned, Shizuoka Hobby Show is now the most fulfilling show in the world. Previously, the Spielwaren Messe held in Nuremberg, Germany lived being said to be the world’s largest hobby show, but with regard to the plastic model, mainly because of the economic downturn in southern Europe, the spot is lacking in spirit It is said that it is. On the contrary, Shizuoka Hobby Show says that due to the collection of buyers from Southeast Asia, which has shown remarkable growth recently, Twin Messe, which has been held for many years now, is in a state of capacity shortage.

The Asian market including China and Japan seems to be booming now. And it seems that the hobby show is being held in Shanghai and Beijing etc. in China, but many buyers in Southeast Asian countries gather in this Shizuoka because there are distrust of mutual makers and no new products are displayed in the show . That is the driving force to push Shizuoka Hobby Show to the world’s best show.

It is certainly the world’s best trade fair as a plastic model show globally. Also, looking at miniature cars, a number of brands, mainly in China, are entering the Japanese market. However, even if it is a plastic model or a miniature car, there is no doubt that it has come to a corner.

Shamanism in the plastic model industry

As a big news in the model industry, a company named Hobico, a big North American Distributor, applied for the application of the Corporate Rehabilitation Act in January 2018 and was effectively sold. Along with this, in Japan manufacturer Hasegawa Co., Ltd. has been hit hard by a relationship that had exported plastic models throughout this country through this hobby. Furthermore, the long-established store of Plamoel, which was Hasegawa’s import source to the Japanese market, the level was the relationship which was acquired by Hobico as mentioned above, and this also stopped production in April 2018. The current level says that all dies and molds are being transferred to the German level.

As a result, as a model manufacturer in the US, only a few brands including the AMT under Round 2 survive. It is a situation where you can not see the future how the American level will go.

Incidentally, under the umbrella level, the brand called Monogram which blew the world in Japan in the 1960s was also included. On the other hand, in Europe, there are model makers at the top of the German level, for example, the largest hobby maker in the UK, Hornby (with Plastic model brands, Air Fix under the umbrella) will also be transferred to Phoenix Asset Management Company in 2017 Management has changed with the sale of shares, the management of Elele in France has been changed many times, now the management is continued under the new owner in 2016, the feeling of tapering is extraordinary. There are emerging plastic model makers in China, especially Macao, especially the transponder with mold factory in Macao has made a breakthrough brand and has grown rapidly to threaten Japanese manufacturers.

Even in the Japanese market, Kyosho who swept the market with radio controlled computers worsened management, sold all the shares to Shinsei Bank investment fund, Rembrandt HD, and plan to regenerate. The project itself is continuing.

Tapered hobby demand

Change in the world of miniature cars also stand out. As it used to be, mini cars are no longer being sold, and if you make a mold for production of one model, you are in a situation where it can not be sold enough for its mold cost to be amortized. For this reason, the resin model is making a difference in width, replacing the die casting model that requires a mold.

When comparing die casting and resin, you can not make a gimmick that was possible with die casting such as opening a door or opening a hood, for example with a resin. There is also a fear of deformation due to aged deterioration. However, as it is possible to produce small quantities accordingly, many manufacturers are turning their attention to resin models at present. Especially recently the quality of the resin has dramatically improved, and the production method is also changing due to the appearance of 3D printers. Of course, if it says to the manufacturer, he seems to feel a big appeal to die casting, but at present it seems that there is a fear of breakage of profit and it is impossible to get out at hand.

As you know, the plastic model also needs a mold by injection molding, and it is necessary to make a number more than a certain number for its amortization, but it is difficult to clear it, and when it comes to miniature cars it raises a new mold The fact that the number of plastic models produced is decreasing.

Consumer preferences have also changed. It is certain that few children are interested in making things. Tamiya also admits the fact that consumers in the hobby industry are aging. Even if you look at the hobby show, it is remarkable that many of the end users occupy most middle-aged elderly people. Whether the hobby that makes up things will be lost as it is, I feel like I am having a real turn at this moment. Specialized the talk with the car and attracted the attention stock of this year’s “Hobby Show”. Plastic model is incredible …

Source (in Japanese language): Response emerging media

Tamiya Summer Tour 2018

Tamiya summer tour August 7th and 8th

Not to mention model fans, those who are planning to start modeling and RC from now on, those who care about Tamiya for a moment can not be missed. We will hold the “Tamiya Summer Tour” which we can join in the group as well this year. The schedule is two days of August 7th and 8th. We prepare 1 day course and afternoon course on both days. In addition, you can choose 3 menus in the morning and afternoon sections to suit your taste. Please come and visit the fun filled tour. (Advance submission is required.)

Holding period: Tuesday, August 7, Tuesday, Wednesday, August 2018 * End of the event 15:00

Venue: Tamiya Head Office Co., Ltd. (3-7, Injidahara, Suruga Ward, Shizuoka City)

Visiting fee: Free * Prices for teaching materials will be charged for the morning production experience.

Time schedule

course One day course (morning and afternoon participation) Afternoon course (participate only in the afternoon)
  9:00 ~ 9:40 Receptionist
9:40-10:00 Company information VTR screening
10 00 ~ 12:00
[select]
【Production Experience (charged)】
· Water Motorbike Working Set
· Plavan Accessory
· Mini 4WD High Speed ​​Machine
12:00 ~ 12:50 lunch Company information VTR screening
※ Reception by 12: 30
13:00 ~ 15:00
[select]
· In-house tour / RC experience
· Tamiya fan meeting
· Mini 4WD race experience
· In-house tour / RC experience
· Tamiya fan meeting
· Mini 4WD race experience

※ The contents of the event etc may be changed.
※ Please accept the reception on the first day course until 9:40 and the afternoon course at 12:30.

Morning department 10:00 ~ 12:00 Choose from the following 3
* Attendants are not required to pay the fee for teaching materials etc.

◆ Water Motorbike Working Set Production Experience
Equipped with a centrifugal pump at the rear of the underwater motor, the figure going forward while blowing water is exactly like a real water bike. You can challenge the making of a fun work series “water bike working set” that is perfect for such summer . After purchasing the set, we make it, and after completion we will actually play on the water. Since the staff will support assembly, we are safe even for first time.
【Teaching materials cost + battery included 2,052 yen (tax included)】

◆ Pla-Plate Accessory Production Experience
We make accessories using “Chi-mu transparent platrab” which
transforms small when heated . Draw pictures and letters with oily magic and heat in electric oven toaster. If you attach a key ring or a string, you will have your own original accessories. We will also sell and produce paper boxes. 【Materials cost + 1 key holder with 216 yen (tax included)】 ※ The design (pattern) to be photographed in Plavan is prepared here, but if you have a favorite picture you want to access as writing on paper (size 10 cm × 10 cm) You may bring it.

◆ Mini 4WD High Speed ​​Machine Production Experience
We will manufacture the machine by incorporating the upgrade parts into the mini 4WD kit (MA chassis). We purchase the necessary set, and the assembly is supported by Tamiya staff. We also prepared sales corners for parts and kits. It is a menu not to be missed by fans who are considering participating in the Japan Cup.
【Materials cost + battery + plated body attachment 2,160 yen (tax included)】

Afternoon Department 13:00 ~ 15:00 Select from the following 3

◆ In-house visits / radio control car maneuvering experience
Tamiya’s in-house observation menu such as the mold section, the planning development section, the design section, etc. which can not be seen normally. Moreover, detailed explanation of the staff in charge, of course, the question is also OK. Also, in a radio control car maneuvering experience, you can enjoy traveling and playing games on special courses. * Radio Control Car Carrying experience is done indoors.

◆ Tamiya fan meeting
full of talks that you can not miss if you are a model fan that spans a wide range of genres such as tanks, cars, airplanes, boats, etc. while talking about the experiences of President Tamiya. You can taste the deep world of Making Hobby. [Junior high school student and more limited]

◆ Mini 4WD race experience
You can experience the mini 4WD racing experience using the full-fledged 5 lane course used in Tamiya’s official race. As well as the machine completed in “Mini 4WD Fastest Machine Production Experience”, you can use your own machine OK. We also prepared a rental machine. Please enjoy the excitement of the Japan Cup.

Please enjoy freely after the tour. 15:00 ~ 16: 00

◆ Visit showrooms, historic halls
You can see precious wooden models, historical plastic models and RC cars.

◆ Shopping
Special prices items, shop limited original goods were also prepared. Please find a digging kit and use it for souvenirs.
【TAMIYA SHOP】 Business hours 9: 00 ~ 16: 30 (Saturday & Sunday and our company holidays are closed.) Plamodel, RC, Mini 4WD, Crafts, original goods, paint etc. were prepared in large numbers.

Application method · Inquiries etc.

· Small and junior high school students are accompanied by parents, but separate actions can be taken for participation programs . Parents should accompany the preschool children. You can apply for even more than high school students.
· For each application, please apply for 1 child and 3 children or less.
· We will group according to the family and group you applied.
· When applying from mobile, notifications and messages from Tamiya will be sent by domain mail of “tamiya-inc.co.jp”, so please set so that you can receive mail from this domain.
· For those who apply for one-day course, please have lunch. (There are also sales of lunch on the day.)
· In case of schedule, course, participation program change, in case of cancellation please contact e-mail or “Tamiya Tour” meeting (TEL: 054-286-5105).
· In the case of a large number of applications, I will make a lottery.

【Application from website】 ⇒ Please fill out this application form.
Application deadline: Thursday, July 19th 【Application by mail (sealed letter)】 ⇒ · Requested date · Requested course · Applicant’s name · Age · Postal code · Address · Telephone number · To the participation program Please include the number of participants (including attendants) etc, enclose the 92 yen stamp, and send it to the address below. Address: 〒 422-8610 Suruga Ward, Shizuoka City 3-7, Inamihara, Co., Ltd. Application deadline for Tamiya Tournament Corner Deadline: until July 19 th (Thu) arrival

* The final guide will be notified by mail or e-mail to all applicants in late July. Sorry to trouble you, but please contact the “Tamiya Tour Stage” staff (TEL: 054-286-5105) if there is no contact. Also, please contact us in case of schedule change or cancellation.
【Inquiries】 “Tamiya Tour” Participants TEL: 054-286-5105

Map ⇒ Access here

■ The pattern of the event is taken with still images, movies, etc., and it may be published on each media related to Tamiya, such as printed matter and homepage. Please acknowledge your participation.
■ The organizer will pay attention to accident prevention, but we can not assume the responsibility in case of accident, theft, injury or other damage.
■ If you do not follow the instructions of the staff, you may be sent off. Please note.

Interview with a Tamiya tool mold maker

Provided by: Minabe College Editorial Department

Do you know the work called Mold Tool? It is a task to make a mold which becomes the basis for producing a large quantity of exactly the same things such as machines and automobile parts. Molds are used not only in automobiles but also in empty cans, various equipment and materials, etc. in a wide range of industries. Because each product must not have a difference, very much technology is required for its production.
This time I talked to Keisuke Sano belonging to the mold section of Tamiya Co., Ltd. about the appeal of work and the chance to get into work.

To summarise this article

  • Even a small mistake by newcomers makes veterans aware. It is absolutely not allowed to pull out hands!
  • An experience of making plastic models as a child is useful
  • Not only knowledge and skills, but also the feeling that it wants to be extremely important is important!

High technology is required for small model die

Q1. Please let me know the job overview and the schedule of the day.

We manufacture molds for producing our own products such as plastic models, radio controllers and mini 4WDs. Molds are necessary for mass production of high quality products and are essential for manufacturing industry. Especially since the mold which I handle is many small models such as cars and airplanes, very high accuracy is required. Manufacture of molds is very important, since the production of molds is directly linked to the quality of products.
07:30 Working 08:00 Starting in the morning 12: 00 Lunch break 13 : 00 Starting in the afternoon 17 : 00 Quitting work

Q2. What is fun and rewarding for work?

Manufacturing molds to produce various products by processing what was a mass of iron will be the process of creating hands “hand” by themselves, so it will be involved in such work I feel pleasure and joy. Since “Tamiya’s model” is also evaluated as the world’s highest quality, we are proud of making molds that produce that product. And when you witness the moment when you pour the material into the mold and become the shape of the product, you get a particularly great sense of accomplishment.

Also, die making is done using a wide variety of machines while considering efficient methods, but it requires extensive knowledge and experience. Learning from past failures and experiences, I feel challenging and enjoyable to absorb as knowledge.

Q3. Is there anything tough to do at work / feel hard?

The mold is made through many processes. In recent years the speed of development has increased and there are many jobs with short delivery times, so making one mistake makes a big inconvenience to the process before and after, making the production schedule inevitable. It is a severe job that does not allow deception as it remains visible in the form of a mold.

Even a very small mistake that you do not notice as a new die molder, you will immediately know if you see a veteran mold tool. I also often failed when I was a newcomer. Even though I thought “I do not notice!”, You are still seeing it (bitter smile).

At present, more than half of Tamiya products are produced in our own factory in the Philippines. Since we are also making molds in the Philippines, it is necessary for the mold staff to transfer abroad and convey the technology in order to make better products. Without deep knowledge and abundant experiences, I can not teach and I can not earn the trust of local employees. Although there are serious aspects, I try to absorb the skills of the seniors on a daily basis to become an ideal technician and I am studying.

Studying machining and drawing, getting employed to Tamiya

Mold of plastic model. There are many complicated and detailed parts, and there are many things that take months to complete

Q4. What kind of opportunities and circumstances did you get this job?

Originally I liked manufacturing, so high school entered business high school, hoped to learn machine machining and drafting and take advantage of it.
I was a local industrial high school and I was familiar with a lot of seniors who are active in Tamiya employment. I did not want to make a mold from the beginning, but in my recruitment form I came to the school there was a mold part of Tamiya famous for mini 4WD and plastic model which I was playing since I was a little, so I applied for it .

Q5. What did you learn to get to this job?

In industrial high school he entered mechanical department and gained basic knowledge of industrial such as machine processing and drawing.
After joining the company, I taught a lot of things to veteran mold workers. Although I was scolded for a few years after joining the company and it seemed to be frustrated, but now when I think about it, again, my seniors are very grateful that everyone is saying the right thing.

Q6. Do you feel that the dream that you held when you were a high school student led to your current job?

Since I was thinking that I wanted to get a job that could make things, the dream I had when I was a high school student has led to my present. The foundation of making things that I learned from my experiences at school and experiences playing with mini 4WD and plastic model when I was small was very useful.

Q7. What kind of person do you think is suitable for the mold maker?

As a proverb of saying “I love what I love”, I think that those who like to make something are suitable. Also, because there are many precise work, it is easy for skilled people to use their abilities.

Technical aspects can be trained as much as you enter the company. Learning something special in high school does not overwhelmingly become advantageous. Rather than that, I think that I like models, I think that it is important to feel something extreme.

Tamiya is a company that is made up of the passion of people who love models and likes it and the high technology that is regarded as the top level in the world. The mold maker is also a gathering of people who like monozukuri and like model making. If you have a strong belief that you do not give up even a little harder, you will surely be a good mold maker.

Q8. Please give me a message for high school students.

When you graduate from high school you will make a big choice about the way you will go in the future. It will be selected by asking advice from various people, but first I would like you to choose your own will to do the most.

And, even if you encounter difficulties or fall into a pinch do not turn backwards, I think that you want to try hard on the road that you chose. Even if that way is slightly different from what I first imagined, if it is the way I chose with my own will, I should be able to hold on!

The lawn on the other side may seem blue and it may actually be blue. There may be things that really does not go well on the road you choose. I do not want you to give up easily, but I think that it may be good to redo the way after doing what you should do.

In order to become a mold worker, you should learn about industries and machinery. In general, getting employed to mold manufacturers and parts processing manufacturers is a shortcut to die molding. Having a national qualification “Mold making skill” makes it advantageous for employment. Also, knowledge of mathematics and computers may be required, so if you want to aim for a die-caster, let’s learn thoroughly from now.

Profile: Tamiya Co., Ltd. Mold Manufacturing Division Keisuke Sano

Source in Japanese language: Shinro No Mikata

Tamiya 1/14 R/C Mercedes-Benz Arocs 3348 6×4 Tipper Truck model receives Truckmodell-Star 2018 award


Tamiya is proud to be able to offer a number of high quality product lines, including our popular 1/14 scale R/C Truck Series. It gives us great pleasure to announce that our 1/14 scale R/C model of the Mercedes-Benz Arocs 3348 6×4 Tipper Truck (Item 56357) has received the prestigious Truckmodell-Star award for 2018. The award is given by major German hobby industry publisher VTH, and bears the name of its popular Truckmodell magazine, a prestigious German language publication on all things R/C truck-related. The award, which is pictured below, is the latest accolade for the Series, and we look forward to announcing many more in the future.
Full Modellbau Awards 2018 list

At the 21st Cultural Affairs Media Arts Festival, Tamiya Co., Ltd. Chairman Shunsaku Tamiya won the meritorious award


21st Achievement Achievement
Shunsaku Tamiya (businessman)

Reason for Winning
Japan’s plastic model which has gained high reputation in the world. Tamiya has been driving the industry since its inception. While drawing a dramatic depiction of illustrations as box paintings to evoke the imagination of making hands, actively making use of logo marks and making the total attraction of the package, you can understand the structure of the motif through assembly Tamousomi Tamiya led by the company that thoroughly pursued thought of “model” beyond toy. This “magic box” functions as a “media” to connect with the world and stories, and it is also the source of creativity of many engineers and artists who are active at the moment. (Kenzo Kudo)

Profile
Born in Shizuoka City in 1934. After graduating from Waseda University in 1985, I joined Tamiya Shoji, my father runs. Although involved in the planning and design of wooden models, during the crisis such as the influx of plastic models from Europe and the United States, we have made a major shift from wooden to plastic modeling. In 1968 he exhibited for the first time at the Nuremberg international toy fair where toy manufacturers all over the world got together and has been exhibiting for 51 years since the banner of the world’s best quality. Tamiya brand has been improved by endeavoring to control the quality of models, including instructing the establishment of customer service division at an early stage. In addition, we appointed representative illustrators such as Komatsumazaki Shigeru, Ueda Kenkirou and Takayoshi Takaragi, and we developed a box painting which becomes the face of a plastic model beyond the role of package decoration and established a painting style called box art . In recent years, this box art has reached the point where an exhibition to visit domestic art museums is held. Since 1994 he took office as Shizuoka Model Teaching Materials Cooperative Association. Shizuoka Hobby Show is held in May every year, contributing to the revitalization of the local economy. Received 2005 Design Excellent Company Award. Since 17 years he also served as Chairman and President of Tamiya Representative Director. In his book “Tamiya model work”, “People who created Tamiya model” Legendary plamo shop “(Bunshun paperback)

Reason of award
Japan’s plastic model which has gained high reputation in the world. Tamiya has been driving the industry since its inception. While drawing a dramatic depiction of illustrations as box paintings to evoke the imagination of making hands, actively making use of logo marks and making the total attraction of the package, you can understand the structure of the motif through assembly Tamousomi Tamiya led by the company that thoroughly pursued thought of “model” beyond toy. This “magic box” functions as a “media” to connect with the world and stories, and it is also the source of creativity of many engineers and artists who are active at the moment. (Kenzo Kudo)

Source: Japan Media Arts Festival

Tamiya Open House 2018 held on Saturday May 12th and Sunday 13th

Departure for Tamiya Expedition! Tamiya Open House Saturday, 12:00~16:30, Sunday 9:00~16:30

※ The opening may be delayed depending on the situation.

Tamiya head office will be opened to the public according to Shizuoka Hobby Show. As well as the historic center exhibiting products from the age of wooden models, the lobby where the real F1 machine is displayed, as well as the in-house observations such as the design department and the mold department that you can not usually see. In addition, you can enjoy plenty of contents a day, including the production of mini 4WD, the maneuvering of RC, the experience of making sweet decoration.

Tamiya head office building welcomed

A star’s mark shines, the head office building welcomes you. We are waiting for everyone’s visit with various real car display this year.

Tamiya historical center (observation point)

You can see precious wooden models, successive plastic models and RC cars.

Showroom (tour point)

Raybrick NSX who actually fought at the SUPER GT Championship, F1 machine of former years such as Lotus and Tyrel, “1/1 Wahgen off-loader” produced one-off based on 1/10 RC model is exhibited. Please take a closer look.

1/1 Mini 4WD Aero Avante Exhibited (Tour Point)

“If the Mini 4WD becomes a real car …” A fan is the only machine in the world that realized a dream that everyone can think through once. It will be exhibited at the Tamiya headquarters showroom during the hobby show, open house period! Please take a closer look at this opportunity.

Planning and Development Department Graphic Design Division Office Visit (Tour Point)

We visited an office where we can not usually see it. Special department staff will explain in an easy-to-understand manner.

Die Factory Tour & Injection Molding Machine Demonstration (Tour Point)

You can see the process of forming the mold and the way the plastic model is finished.

Robot sumo wrestling “Hebokon workshop class” to be enjoyed even by beginners (Experience event / charged)

Let’s challenge the topic “Hebokon” on the street! It is a robot work classroom that you can participate even without experience of work. This time we will use Tamiya’s RoboCraft series. As Tamiya staff will support the production, it is okay. RoboCraft series is freely decorated with plenty of materials to produce original robot. Let’s fight robot sumo wrestling robot made by staff after completion!
· · · However, the charm of Hekobon is not just strength! Make interesting movements and unique armed robots and let everyone say “up!” For a fun robot such as a unique strategy, a fantastic idea, a nice movement, the strength of sumo wrestling, we will give “Special Hebokon T – shirt”. Children who are not good at work should also join us. (Adults can also participate.)

Schedule May 12 (Sat), 13 (Sun) 9: 00 ~ 16: 30 ※ The last reception will be 13:00.
◎ Participation fee 1,404 yen (with decorative materials, dry batteries, tax included) ※ Accessories can be brought in.
◎ use kit Mechanical Kirin (71105) , mechanical Pig (71111) , mechanical Darby (71112) choose one from. ※ The stock may run out.
◎ Recommended for elementary school 3rd grade or above.
* If parents can help you to complete by co-production, you can join even if they are under 2 years old.

“Hebokon” is a project born from the popular site “Daily Portal Z”.
※ This event is not hosted by Daily Portal Z.

RC Car Experience Running Tour “Try !! Tamiya RC” (Experience Event / Free)

Let’s run Tamiya’s RC car thoroughly! “Try !! Tamiya RC” can challenge RC piloting with a simple mini game. Of course the machine is prepared in Tamiya. Join for free, of course invite your friends and join us!

Tamiya latest RC car “Triple Wheel Series Dancing Rider” Experience Running Meeting held (Experience Event / Free)

Tamiya’s latest RC car experiencing running meeting will be held. It features an affordable speed and a cute body. It is a new sense of three wheel RC car that cornering by tilting the car body. Since operation is easy, women and children are also welcome. Please experience it.

⇒ Check the running of the RC dancing rider with the animation! (YouTube)

Fujitsu dry batteries provided mini 4WD Japan Cup 2018 official course open to the public (observation point)

It will be the stage of the battle in 2018, the total length 169.8 meters “The Japan Cup 30 Year Classic Circuit 2018” is released for the first time! ! You can see actual courses such as “Vortex changer”, “New Era turn”, “Fujitsu climax road” etc. ※ You can not drive.

Mini 4WD Assembly Corner Installation (Experience Event / Paid)

Let’s make mini 4WD kit purchased at the sales corner etc on the day and play around! (We will accept at any time.) The completed machine can run on a dedicated circuit. Upon assembly, the staff will give a gentle lecture. * Driving on the circuit is limited to machines assembled in a work classroom. ※ There is no installation of the mini 4WD free running course.

Sweets Decoration Production Experience Corner (Experience Event / Paid)

Experience corner of “sweets decoration” which is popular every time. Make real sweets like clay and other materials. Since the work to make is different every year, please also look forward to this year. You can take home the completed work.
※ Works can not be eaten. Time 9: 15 ~ 16: 30 (15:30 reception end), accept at any time at the venue ⇒ For details, please click here. (Currently under preparation)

Separate events

Let’s enjoy with parents and children. Latest RC Touring Car Assembly Classroom!

Visit to hobby show and Tamiya open house. Weekend of Hobby Zamani “Tamiya RC Tour 2018 Spring” held, such as running at Tamiya Circuit!
We planned “Tamiya RC Tour 2018 Spring” of Hobby Zamo, spending with TRF (Tamiya Racing Factory) staff. You can enjoy RC car assembly class, RC run at Tamiya circuit, visit Tamiya open house and Shizuoka hobby show. Please join us with parents and children.

⇒ For more details please click here.

Tamiya Kakegawa Circuit RC Experience Bus Tour to Go with Dr. Taki

We planned a bus tour that you can experience “Tamiya Kakegawa Circuit” opened in June 2016 as the world’s largest all-weather RC circuit. On the morning of May 13th (Sunday), we enjoyed each hobby show venue and departed to Kakegawa circuit by charter bus from noon. Light talk of “Taki Dr. Taki” creator of Tamiya RC car? Lunch time in the car while listening. After arriving at the circuit, there are plenty of contents such as a tour of the facility and powerful engine RC car race, an experience traveling society where the RC car can actually be steered, special sales corner of the RC kit etc. Also, participants have a big souvenir. Recommended tour to those who would like to see Tamiya Kakegawa Circuit.

⇒ For more details please click here.

Map ⇒ Access here

■ The pattern of the event is taken with still images, movies, etc., and it may be published on each media related to Tamiya, such as printed matter and homepage. Please acknowledge your participation.
■ The organizer will pay attention to accident prevention, but we can not assume the responsibility in case of accident, theft, injury or other damage.
■ While I am careful about safety management during the event, please bring a copy of insurance certificate for a moment’s circumstances.
■ For theft prevention, please be sure to wear valuables.
■ Please refrain from drinking in the hall. Moreover, those who did the trouble acts of other customers and those who do not follow instructions of the staff may be sent out. Please note.
Event contents may change without notice. Please note.

Tamiya Shogakkan Big Comic 50th Anniversary 1/700 Aircraft carrier IBUKI

“DDV 192 aircraft carrier IBUKI” Three-dimensional at 1/700 scale!
Shogakkan Big Comic Commemorating the 50th Anniversary “Special Project”


1/700 DDV 192 Aircraft carrier IBUKI (Scheduled to be released this spring)
“Airborne mother IBUKI” in the Shogakkan Big comic series (Cooperation by KAWAGUCHI Kaiji / Eiji Eriya). The main character, Ryuta Akitsuki is captain of the captain’s captain “IBUKI” on three-dimensional scale at 1/700 scale. An image of the original equipped with a ski jump type launch pad is reproduced as it is. Fully equipped accessories such as shipboard machines and working vehicles. We also pursued a sense of precision and realism as a scale model.

* The posted image is a CG image under development.