95093 RAIKIRI (MA CHASSIS) JAPAN CUP 2016
is the emergence Memorial model for the summer of the Japan Cup. It finished the popularity of Raikiri to white base of the pace car style. MA chassis having a high strength polycarbonate ABS resin. Battery holder and A parts is black made of low-friction resin, such as the gear cover. The super-hard low-height tire was printing the Japan Cup logo “JAPAN CUP 2016 TAMIYA” in white.
★ stickers, dedicated design that contains the Japan Cup logo. ★ wheel, three-dimensional design is impressive Y-spoke type (red). ★ gear ratio is 3.5: 1. ★ motorized.

95266 DASH-5 DANCING DOLL PREMIUM (SUPER-II CHASSIS)
“Dash! Yonkuro” in appeared in the dash corps only female, Sumeragiwako of machine is appeared in the premium specification. Vertical fin of the vertical and horizontal tail and side pontoons distinctive sharp form attractive. The chassis is made of ABS resin of dark blue. Turn switch, 2-point fixed rear stay, and the A component such as a 13mm roller, open locks one lock gear cover is yellow parts available at the touch of a button.
★ sticker new design of metallic tone. ★ fitted with slick tires on 5-spoke wheels. ★ high Super II chassis adoption of evaluation in the race. ★ gear ratio is 4.2: 1. ★ motorized.

15497 HG CARBON REINFORCING PLATE For 13 / 19Mm ROLLER (1.5Mm)
is a carbon plate of straight bar shape that can be used in a variety of remodeling. It can be attached to 13mm or 19mm roller full provisions width. In Lacey carbon pattern, Tamiya mark and white print, such as a roller size shine.
★ 1.5Mm in addition to the carbon plate 2 sheets of thick, screws and nuts for parts mounting, washer, etc. also set.

15498 HG CARBON WIDE FRONT PLATE (1.5Mm)
is 9,11,13,19mm 1.5mm thick carbon steel stays of which is fitted with a roller to the full provisions width. Lightweight, high strength, white print, such as the unique carbon pattern and Tamiyarogo will boost the racing mood.
★ MA, MS, AR, VS, Super II, can be attached to the Super XX chassis. There are some things processing is required.

15499 HG CARBON WIDE REAR PLATE (1.5Mm)
is attached to 9,11,13,17,19mm roller full provisions width, is a high strength 1.5mm thick carbon steel stays. In addition to the racy carbon pattern, was white print the diameter of Tamiyarogo and can be mounted roller.
★ MA, MS, AR, VS, super Ⅱ, Super X, Super XX, will be attached to the Super TZ-X chassis.

15502 THUNDER SHOT CLEAR BODY SET (POLYCARBONATE)
ideal for lighter remodeling that has become the mainstream in the race. Small is the Thunder shot clear body set of Jr. on the front projected area in the lightweight among successive clear body. Improved acceleration performance and maximum speed, also increase the running stability with a low center of gravity.
★ strong unbreakable polycarbonate body into shock. ★ with clear body dedicated transparent sticker.

95091 HYPER-DASH 3 MOTOR J-CUP 2016
is the motor that was to commemorate the popular annual Japan Cup. Produce a premium sense of backing and special design with larger layout characters JAPAN CUP 2016 to motor label. Even as a souvenir, it can also be used for the race.
★ motor label Gold & Green. ★ adopt the electrical efficiency and durability of excellent silver carbon brush in the balance.

95092 HYPER-DASH MOTOR PRO J-CUP 2016
Japan Cup special anniversary model of Expert mini 4WD PRO for high-performance motors. Mount and motor label in JAPAN CUP character largely laid out the features of 2016. It was to balance the electrical efficiency and durability adopted a silver carbon brush.
★ end bell is red, motor label Silver & Black. ★ adopt a silver carbon brush. ★ mini 4WD PRO only.

95270 A-SPOKE WHEELS For LOW-PROFILE TIRES (SILVER PLATED)
in 1/1 GIANT MINI 4WD PROJECT (Aero Avante vehicle of), is the wheel for four wheel drive mini with the image of the aluminum wheel that has been adopted in the actual vehicle. American style of design with the motif of “A” in the alphabet is attractive.
★ narrow tread type of silver plating specification. ★ 4 pieces of one minute. ★ four wheel drive mini PRO, you can use the mini four-wheel drive each car.

55117 POWERCHAMP RS
available in four wheel drive mini official competitions of Tamiya, is a high-performance AA alkaline batteries. Than the power Champ far, capacity and current discharge performance Gunto up. Strong run when power is needed, of course, stamina is also enough.
★ excellent in impact resistance, stable performance. Lacy design was based on red and white ★. ★ 2 bottles.

70223 FRICTION POWERED SNAIL
the second installment is snail ecological tool set that the battery also not be used motors. Flywheel (flywheel) is the energy of the inertia to rotation, go leisurely. Shell and polypropylene sheet body is a flexible. The person who crank attachment of, advance shaking his head and tail to the left or right, or you will be assembled to choose the two operations to proceed by moving back and forth the head. The maximum duration running time is about 35 seconds.
★ total length of about 155mm. ★ become the shape of the head is to guide, and well avoid the obstacle. ★ necessary parts are all set, screws and inset only in assembling OK. ★ power unit is made of a transparent ABS resin.

70224 SWIMMING DOLPHIN
is a tool set of dolphins swim by moving the tail fin and the head up and down. Changing the rotational movement of the underwater gear box into a reciprocating motion in the crank, swim by moving the tail fin of a soft resin sheet up and down like a dolphin. Also possible to swim while turning to the left and right by adjusting the mounting angle of the dorsal fin and the sucker. If you change the mounting position of the crank or a float, you can also change how to swim and speed.
★ total length of about 180mm. ★ body and a soft resin sheet is pretty pink, such as the tail fin. All set the required parts ★. Easy assembly with a simple structure. ★ AAA batteries single use (sold separately).

95281 KUMAMON MINI 4WD – SUPPORTING KUMAMOTO
is a special specification of mini four-wheel drive to cheer the Kumamoto Prefecture. Do your best! Kumamoto mini four-wheel drive (kumamon version), use a clear gray body of Raikiri. It is a specification that assembly and pre-painted bear Mont drivers look better. Of course, marking was also set the metallic type of dedicated. The double shaft motor mounted on the center of the vehicle body, MA chassis of midship layout is black color.
★ total length 156mm. Set the low-height tire of black 5-spoke wheels of yellow ★. ★ standard equipped with a high-performance Rebuchun 2 motor PRO, 3.5: 1 ultra-fast gear with. ※ benefit the full amount of this product, we will be donated from Tamiya in Kumamoto.

95279 ASTRO-BOOMERANG CLEAR BLUE SPECIAL (SUPER-II CHASSIS)
hero of the four wheel drive mini manga “Dash Boy heaven”, the car Astro boomerang of world peace comes a special color. Body and the front wing is refreshing clear blue with a rear shape of the image of a sharp nose and forward wing. Color ring for the sticker is also a specialized products of the clear. Super Ⅱ chassis white made of ABS resin, A component is made of blue ABS resin.
★ total length 150mm. ★ large diameter narrow lightweight wheels of white, we set the hard barrel tire of low running resistance Blue. ★ 4.2: 1 speed gear, motor with.

NEW BURNING SUN (Tentative Name) (Reference Exhibit)
the Tankuro new machines that appeared in “Hyper Dash! Yonkuro (Hiroyuki Takei teacher Author)” series in the Shogakukan comics magazine “Colo Aniki” was a reference exhibit at the clay model. While leaving the image of the primary burning San heavyweight machine, it is a straight two big nose and rear inclined wing characteristic of extending to before.
★ total length 156mm. ★ chassis fabrication assumes the MA of midship motor in pursuit of driving efficiency.

18645 SILWOLF (MA CHASSIS)
the machine on which the image of a GT car in Europe is the emergence in the mini 4WD PRO series. Was placed a large air outlets on the bonnet, the body of the long nose and short deck, form that was equipped with a large rear wing is the actual vehicle a sense of plenty. MA chassis is made of gray ABS resin, six rollers and rear skid bars, A component such as a gear cover is made of low-friction resin light gray.
★ total length 156mm. ★ the perfect fin design wheel racing car, we set the low-height tire of black. ★ 3.5: 1 ultra-fast gear, double shaft motor with.

19448 PROTO-SABER EVOLUTION PREMIUM (AR CHASSIS)
in the four wheel drive mini cartoon “Bakuso Brothers Let’s & Go !! WGP”, the machine that Japan national team “TRF Victoires” J (Jay) is a favorite, is a premium version of the Proto Saber Evolution. Chassis high strength of the monocoque structure AR. Body color is purple. Chassis body is metallic gray made of ABS resin. Under panel and diffuser is made of low-friction resin of purple.
★ total length 155mm. ★ in Y-spoke wheels of silver, fitted with low-height tire of black. ★ sticker is only type of metallic tone. ★ 3.5: 1 ultra-fast gear, motor with.