Tamiya 63303 “Tamiya Model Work” book written by Shunsaku Tamiya


From wooden models to plastic models, RC models and mini 4WD, Tamiya Models’ Work, which describes the path taken by Tamiya Models through numerous interesting episodes, is now available in a paperback edition of a reasonable size and price. In addition to the contents of the long-selling hardcover edition, the book also contains secret stories about the development of aircraft models, waterlines and F1 models, as well as a large number of valuable photographs. (A paperback and e-book edition are now available.)

Contents

Chapter 1: A happy encounter with wooden models
This is how I met models. Is that the inverted gull-shaped wing?

Chapter 2: Turning to plastic modelling in tears
The first model “Battleship Musashi” suffered a huge deficit and made me hungry.

Chapter 3: The Mold is the Life of Plastic Models
The arrogant mould maker, but we have no choice but to endure. Why? The rapid decline of the slot car boom

Chapter 4: Research is the basis of model making
The Aberdeen Tank Museum: a series of discoveries ●The Tamiya Hall completed at the Bovington Museum ●Participation in the restoration of the “Seiran” at the Smithsonian Air and Space Museum ●Flying to Israel to cover Soviet tanks ●Covering snow at the Patton Museum at seven degrees below zero ●The wonderful staff who will never be forgotten ●The rival is “Air”! Fix Magazine”? The first issue of “Tamiya News” ●The launch of “Soldier Dolls” greatly expanded modeling expression ●”Pose before two frames”, a secret of Yasuo Otsuka ●Modelling the Schwimmwgen, a famous supporting character on the battlefield ●The joy of dioramas is to weave stories ●Why are tank models so popular ●The birth of unique water lines ●Take Ueda Meeting Hachiro-san

Chapter 5: Going all out is the world of the hobby
The only way is to buy a real Porsche 911 and take it apart ●Former accounting department employee who developed a “quiet RC car” ●Electric RC cars are developed through education that respects employee autonomy Tamiya’s RC cars kick up sand in California. Solar-powered cars – The face of Tamiya in the world, created by F1

Chapter 6: 18 Years of Mini 4WD with its peaks and valleys
The first Mini 4WD failed to win the hearts and minds of children ●The Mini-4WD developed as the younger brother of the Wild Wheelis ●Let’s completely change the design to the speed type ●Children are geniuses at modification and inventors ●Popularity plummets! The Mini 4WD boom is back with a full cowl ●Ingenuity and determination are the real appeal of Mini 4WD racing ●Tamiya’s “Seriousness” is packed into the Mini 4WD.

Last Chapter: A Foreigner’s View of Tamiya Models
Memories of Shunsaku Tamiya Towards Tamiya’s 21st Century

Commentary by Richard Koo (Economist, Nomura Research Institute)

Shunsaku Tamiya, Bunshun Bunko
An e-book version of The Work of Tamiya is also available. Please use the electronic version, which can be easily read on a variety of devices. (Contents are the same as the paperback version.)
To purchase the e-book version, please click here.
Bungeishunju BOOKS e-book ‘The Work of Tamiya Models’

Limited scale model Tamiya 25207 1/35 Leopard 2A6 Tank “Ukrainian Army”

Item No 25207
Scale limited product
1/35 Scale Leopard 2 A6 TANK “Ukraine”
Scheduled to be shipped in late March 2023
*Detailed images will be added at a later date.
Price in Japan 5,060 yen

Overall length=314mm

German main battle tanks that have started delivery
The Leopard 2 was developed in West Germany in the 1970s and became the main battle tank of the German Bundeswehr. Among them, the A6 has significantly improved its offensive and defensive capabilities and has achieved further modernization. The turret’s wedge-shaped additional armor and the commander’s panorama sight equipped with a thermal imaging device were inherited from the previous A5, and the main gun’s 120mm smoothbore gun was extended to 55 caliber. The muzzle muzzle velocity and armor penetration have been greatly enhanced by increasing the barrel length to more than 1 meter. The A6, which began to be deployed in 2001, has earned trust by operating a type with its own renovation in Greece and Canada. And in January 2023, the German government announced the provision of its own A6 to support the Ukrainian army against the invasion of the Russian army.

About the Model
A 1/35 scale plastic model assembly kit of the Leopard 2 A6. ★Length: 314mm, Width: 107mm. ★The powerful style with the long-barreled 120mm smoothbore cannon has been realistically modeled. ★Wedge-shaped additional armor on the front and sides of the turret is realistically finished. ★Clear parts for headlights and taillights. ★Easy-to-use belt type tracks. ★Various slide marks such as the national flag and the white cross, which is a symbol of victory in Ukraine. ★Product packaging uses new original drawings.

Mini 4WD Tamiya 18717 Dyipne (FM-A Chassis)

Almost 4 years after its local sale by Lils Hobby Center it is now available broadly.

Overall length = 156 mm The photo shows the assembled and painted kit

Released on Saturday, April 1, 2023 in Japan, price 1,210 yen

Pop and Gorgeous Filipino Popular
This is a plastic model assembly kit of a high-performance racer that uses a shaft drive four-wheel drive. A mini 4WD reproduction of the “Jeepney”, a shared bus that is popular with citizens in the Philippines. The glossy red ABS resin body has been modeled to capture the characteristics of the retro-designed front mask and the entrance and exit at the rear of the vehicle, as well as the bonnet bus style full of love. In addition, the roof part with the eaves and the horse doll on the bonnet are separate parts with plenty of three-dimensional effect. It is also a nice point that the painting is finished neatly. The chassis adopts FM-A with a front motor layout, and silver A-spoke wheels are fitted with black low-height tires. A metallic sticker set that expresses glittering coloring, headlights, logos, etc. that attracts attention.

Adopts FM-A chassis with front motor layout
The chassis uses FM-A with a front motor layout that incorporates an aero design. The center of gravity is closer to the front of the car body, so it is possible to run with a sense of stability even on courses with many ups and downs. In addition to the standard low-friction resin skid bar at the bottom of the front, the four rollers are also made of low-friction resin. In particular, the rear roller is an 8mm thick type that enhances stability. In addition, the motor can be easily replaced from the bottom of the chassis, allowing speedy setting changes. Various parts can be attached to the aero side stay, which is inspired by the cross-sectional shape of an airplane wing. The chassis body made of ABS resin is black, and the A parts made of low-friction resin are red. The gear ratio is set to 4.2:1.

Basic specifications
●Completed length: 156mm, width: 97mm, height: 56mm ●Motor included ●Adhesive-free snap-in assembly

Separately purchased
●2 AA batteries

Tamiya limited edition Bronco CC-02 project



Tamiya’s recent release of the limited edition CC-02 Bronco was the perfect excuse for a new project build. This version of the Tamiya CC-02 Bronco kit comes with a prepainted and precut body from the factory. You get a quality finish and it takes care of a task many are afraid to complete. So in this video, Greg will quickly go over the kit and then show you all of the options available for it if you want to build up an exciting project. This turned out to be a wild build with the installation of the optional tracks and you’ll see them in action tearing up mud and snow!
Added parts shown
Tamiya CC-02 Aluminum Servo Mount 22002
Tamiya Motor Bridge 54971
Tamiya Carbon Steel Shafts 54998
Tamiya Front CV Shafts 54984
Tamiya Link Mounts 54944
Tamiya Pivot Balls 54945
Tamiya Spur Gear Adapter 54970
Tamiya Servo Horn 54893
Tamiya Shock Set 54991
Tamiya Spring Set 54992
Tamiya Track Set 54948
Source: RCDriver_Online

Tamiya official international release list April 2023

R/C Models
 58718  1/10 R/C Toyota Celica GT-Four (ST165) (TT-02)
 22065  TT-02 Type-SRX Aluminum Gearbox Joints
 22066  TT-02 Type-SRX Aluminum Propeller Joints (& Swing Shaft Caps)
 22067  TH 10-Spoke Wheels (White) (24mm Width, Offset 0)

Static Models
 21176  1/12 Team Suzuki ECSTAR GSX-RR ’20 No.36 (Finished Model)

Kids
 95324  Adjustable Mass Dampers (2.5g Weights x6)

Tools & Paints
 70253  Universal Pillar Set

Tamiya Plastic Model Factory Limited Kit Mini 4WD Dual Ridge Jr. 2023 Burning Special


Released at Tamiya Plastic Model Factory from March 21, 2023 (holiday / Tuesday)
“Dual Ridge Jr. 2023 Burning Special”, a limited kit that can only be obtained at Tamiya Plastic Model Factory Shinbashi Store and Tressa Yokohama Store, will appear. Designed by hyper designer Kayuki Yamazaki, the aggressive style that cuts through the air is colored with a special sticker with a burning fire pattern. The “Tamiya Plamodel Factory” logo and checkered flag graphics add to the mood. Of course, the lightweight and compact VZ chassis and super hard small-diameter low-height tires make for a high-performance ride that you can’t miss. It is finished in a passionate one that stimulates the racer spirit.

Tamiya 58688 Toyota Land Cruiser 300 (CC-02 Chassis) official product video



Since the first generation model release in 1951, the Toyota Land Cruiser has been one of the most famous 4WD vehicles in the world. This R/C model assembly kit recreates the Land Cruiser 300 series announced in 2021. The polycarbonate body realistically depicts the eye-catching, dignified form with separate parts to capture the distinctive large front grille’s horizontal fins and metal-plated sections. Light case and door mirror components are metal-plated, and door handles and shark fin antenna on roof are rendered by separate parts for more realism. Silver color 12-spoke wheels are paired with block pattern tires.
CC-02 chassis
Designed for a wide range of off-road scenes including rocky terrain, the CC-02 chassis’ ladder frame is inspired by full-size vehicles and is the base for its superior durability. A 4WD setup employs the motor longitudinally behind the front axle, with separated gearbox and transfer case, and propeller shafts transmitting power to the differential gears front and rear. 20 gear ratios between 11.09:1 and 29.28:1 are possible. 4-link rigid suspension is employed front and rear, with CVA oil dampers.

Spielwarenmesse 2023 introduction, Tamiya Spring Cup 2023 advice, Tamiya RC new products in the first half of 2023 & Tamiya RC history



Introduction of German Spielwaren Messe 2023, Tamiya Spring Cup 2023 advice information and Tamiya RC history!
Spielwaren Messe 2023 held in Germany in early February 2023, Tamiya booth where many new products were announced Introducing!
・ We give setting advice for the “Tamiya Spring Cup 2023” scheduled to be held at Tamiya Kakegawa Circuit on March 18 (Sat) and 19 (Sun). A lot of useful information, such as a comparison video of the “M-07” and “MF-01X” that can be used in the new class “M Rally Grand Prix”! ・Tamiya RC history introduces RC released from 1999 to 2000. “Juggernaut 2” which boasts the largest size in Tamiya RC history, “Mitsubishi Lancer Evolution VI WRC” which won the world rally championship for 4 years in a row in 1999, and “F103LM-TRF Special Chassis Kit” appear.


Introducing Tamiya RC new products in the first half of 2023 and Tamiya RC history!
・ We deliver the details of the new products announced at the “Spielwaren Messe 2023” held in Germany in early February 2023 and the first half of 2023 at the local venue. Don’t miss this opportunity to check out the details of the BBX and MB-01, which have been attracting a lot of attention! ・Tamiya RC history introduces the RC released in 2000. The first model in the TB series, the Subaru Impreza (1999 German domestic rally championship winner), the Mercedes-Benz CLK DTM 2000 Team D2, and the first two-belt machine in the TA series, the TA04 PRO!